Jeep 2014 Grand Cherokee Owner's Manual page 323

• ParkSense®
The ParkSense® system will scan for objects behind the
vehicle when the transmission shift lever is in REVERSE
and the vehicle speed is less than 11 mph (18 km/h). It
will provide an alert (audible and/or visual) to indicate
the proximity to other objects. The system can be enabled
with Sound Only, or Sound and Display. To change the
ParkSense® status, touch and release the Sound Only or
Sounds and Display button. Then touch the arrow back
soft-key. Refer to "ParkSense®" in "Understanding The
Features Of Your Vehicle" for system function and oper-
ating information.
• Front ParkSense® Chime Volume
The Front ParkSense® Chime Volume settings can be
selected from the EVIC or Uconnect® System — if
equipped. The chime volume settings include LOW,
MEDIUM, and HIGH. The factory default volume setting
is MEDIUM. To make your selection, touch the
UNDERSTANDING YOUR INSTRUMENT PANEL 321
ParkSense® Front Chime Volume soft-key, until a check-
mark appears next to setting, indicating that the setting
had been selected. Touch the back arrow soft-key to
return to the previous menu. ParkSense® will retain its
last known configuration state through ignition cycles.
• Rear ParkSense® Chime Volume
The Rear ParkSense® Chime Volume settings can be
selected from the EVIC or Uconnect® System — if
equipped. The chime volume settings include LOW,
MEDIUM, and HIGH. The factory default volume setting
is MEDIUM. To make your selection, touch the
ParkSense® Rear Chime Volume soft-key, until a check-
mark appears next to setting, indicating that the setting
had been selected. Touch the back arrow soft-key to
return to the previous menu. ParkSense® will retain its
last known configuration state through ignition cycles.
4