Electronic Vehicle Information Center (Evic) Display Messages; Operation - Jeep 2014 Grand Cherokee Owner's Manual

434 STARTING AND OPERATING
If equipped with a touch screen radio all enabling/
disabling of air suspension features must be done
through the radio. Refer to "Uconnect® Access Settings"
in "Understanding Your Instrument Panel" for further
information.
Electronic Vehicle Information Center (EVIC)
Display Messages
When the appropriate conditions exist, a message will
appear in the EVIC display. Refer to "Electronic Vehicle
Information Center (EVIC)" in "Understanding Your
Instrument Panel" for further information.
An audible chime will be heard whenever a system error
has been detected.

Operation

The indicator lamps 3 through 6 will illuminate to show
the current position of the vehicle. Flashing indicator
lamps will show a position which the system is working
to achieve. When raising, if multiple indicator lamps are
flashing on the "Up" button, the highest flashing indica-
tor lamp is the position the system is working to achieve.
When lowering, if multiple indicators are flashing on the
Up button the lowest solid indicator lamp is the posi-
tion the system is working to achieve.
Pressing the "UP" button once will move the suspension
one position higher from the current position, assuming
all conditions are met (i.e. engine running, speed below
threshold, etc). The "UP" button can be pressed multiple
times, each press will raise the requested level by one
position up to a maximum position of OR2 or the highest
position allowed based on current conditions (i.e. vehicle
speed, etc).
Pressing the "DOWN" button once will move the sus-
pension one position lower from the current level, as-
suming all conditions are met (i.e. engine running, doors
closed, speed below threshold, etc). The "DOWN" button
can be pressed multiple times. Each press will lower the