Page 1 Grand Cherokee 2 0 1 2 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of fea- Chrysler Group LLC shall be deemed to be deleted and the tures and equipment that are either standard or optional on name Chrysler Canada Inc.
Page 3: Introduction
TABLE OF CONTENTS SECTION PAGE ............3 INTRODUCTION .
Page 5: Table Of Contents
INTRODUCTION CONTENTS Introduction ......4 Warnings And Cautions ....8 Rollover Warning .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION handles on different road surfaces. Your driving skills Congratulations on selecting your new Chrysler Group will improve with experience. When driving off-road or LLC vehicle. Be assured that it represents precision working the vehicle, don’t overload the vehicle or expect workmanship, distinctive styling, and high quality - all the vehicle to overcome the natural laws of physics.
Page 7: Rollover Warning
INTRODUCTION 5 NOTE: After reviewing the owner information, it Do not attempt sharp turns, abrupt maneuvers, or other should be stored in the vehicle for convenient referenc- unsafe driving actions that can cause loss of vehicle ing and remain with the vehicle when sold. control.
Page 8: How To Use This Manual
6 INTRODUCTION Failure to use the driver and passenger seat belts pro- HOW TO USE THIS MANUAL vided is a major cause of severe or fatal injury. In fact, the Consult the Table of Contents to determine which section U.S. government notes that the universal use of existing contains the information you desire.
Page 9 INTRODUCTION 7...
Page 10: Warnings And Cautions
8 INTRODUCTION WARNINGS AND CAUTIONS vehicle. Save this label for a convenient record of your This Owner’s Manual contains WARNINGS against op- vehicle identification number and optional equipment. erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle.
Page 11: Vehicle Modifications/Alterations
INTRODUCTION 9 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 13: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....14 Vehicle Security Alarm — If Equipped ..20 Wireless Ignition Node (WIN) .
Page 14 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The Panic Alarm ....26 Wind Buffeting ..... . . 45 Programming Additional Transmitters .
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Seat Belt Pretensioners ....62 Event Data Recorder (EDR) ....82 Supplemental Active Head Restraints Child Restraints .
Page 16: A Word About Your Keys
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Wireless Ignition Node (WIN) Your vehicle uses a keyless ignition system. This system The Wireless Ignition Node (WIN) operates similar to an consists of a Key Fob with Remote Keyless Entry (RKE) ignition switch.
Page 17: Key Fob
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion.
Page 18: Removing Key Fob From Ignition
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove the emergency key, slide the mechanical latch Removing Key Fob From Ignition at the top of the Key Fob sideways with your thumb and Place the shift lever in PARK. Turn the Key Fob to the then pull the key out with your other hand.
Page 19 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 • The power window switches, radio, power sunroof (if CAUTION! (Continued) equipped), and power outlets will remain active for up • Leave the Key Fob in the ignition and either: to 10 minutes after the ignition switch is turned to the •...
Page 20: Key-In-Ignition Reminder
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Key-In-Ignition reminder only sounds WARNING! (Continued) when the Key Fob is placed in the OFF or ACC ignition • Do not leave the key fob in or near the vehicle, and position.
Page 21: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 vehicle can be used to start and operate the vehicle. The CAUTION! system will shut the engine off in two seconds if an invalid Key Fob is used to start the engine. The Sentry Key Immobilizer system is not compat- ible with some after-market remote starting systems.
Page 22: Customer Key Programming
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Key Programming CAUTION! Programming Key Fobs or RKE transmitters may be • Always remove the Key Fobs from the vehicle and performed at an authorized dealer. lock all doors when leaving the vehicle unat- General Information tended.
Page 23: Rearming The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 audio and visual signals, the horn will sound, the head- To Arm The System lights will turn on, park lamps and/or turn signals will Follow these steps to arm the Vehicle Security Alarm: flash repeatedly for three minutes.
Page 24: To Disarm The System
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Cycle the vehicle ignition system out of the OFF exterior zone (refer to Keyless Enter-N-Go in Things To Know Before Starting Your Vehicle for further informa- position. tion). • For vehicles equipped with Keyless Enter-N-Go, •...
Page 25: Tamper Alert
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • When the Vehicle Security Alarm is armed, the interior Tamper Alert power door lock switches will not unlock the doors. If something has triggered the Vehicle Security Alarm in your absence, the horn will sound three times and the The Vehicle Security Alarm is designed to protect your exterior lights blink three times when you unlock the vehicle;...
Page 26: Remote Keyless Entry (Rke)
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: at speeds 5 mph (8 km/h) and above disables the system • The front courtesy overhead console and door cour- from responding to all RKE transmitter buttons for all tesy lights do not turn on if the dimmer control is in RKE transmitters.
Page 27: To Unlock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 To Unlock The Doors Flash Lamps With Lock Press and release the UNLOCK button on the RKE This feature will cause the turn signal lamps to flash transmitter once to unlock the driver’s door or twice to when the doors are locked or unlocked with the RKE unlock all doors.
Page 28: To Lock The Doors
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Doors headlights turn on, the park lamps will flash, the horn Press and release the LOCK button on the RKE transmit- will pulse on and off, and the interior lights will turn on. ter to lock all doors.
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit board. 1. Remove the emergency key by sliding the mechanical latch at the top of the RKE transmitter sideways with your thumb and then pull the key out with your other hand.
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal.
Page 31: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 4. To assemble the RKE transmitter case, snap the two 1. A weak battery in the RKE transmitter. The expected halves together. life of the battery is a minimum of three years. General Information 2.
Page 32: How To Use Remote Start
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Vehicle theft alarm not active How To Use Remote Start All of the following conditions must be met before the • Ignition in Off position for Keyless Enter-N-Go vehicle engine will remote start: •...
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Remote Start Abort Message On Electronic Vehicle To Enter Remote Start Mode Information Center (EVIC) — If Equipped Press and release the REMOTE START button The following messages will display in the EVIC if the on the RKE transmitter twice within five sec- vehicle fails to remote start or exits remote start prema- onds.
Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two consecutive times with To Exit Remote Start Mode And Drive The Vehicle the RKE transmitter. However, the ignition must be Before the end of 15 minute cycle, press and release the cycled by pushing the START/STOP button twice (or UNLOCK button on the RKE transmitter to unlock the the ignition switch must be cycled to the ON/RUN...
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 • For vehicles equipped with the Keyless Enter-N-Go The Remote Start Comfort System can be activated and feature, the message “Remote Start Active — Push deactivated through the Electronic Vehicle Information Start Button” will display in the EVIC until you push Center (EVIC).
Page 36: Door Locks
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS The power door locks can be manually locked from inside the vehicle by using the door lock knob. To lock each door, push the door lock knob on each door trim panel downward.
Page 37: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! (Continued) • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. •...
Page 38: Child-Protection Door Lock System - Rear Doors
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If a rear door is locked, it cannot be opened from inside Child-Protection Door Lock System — Rear the vehicle without first unlocking the door. The door Doors may be unlocked manually by raising the lock knob. To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with Automatic Door Locks —...
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Child-Protection Door Lock Location Child-Protection Door Lock Function WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged (locked).
Page 40: Keyless Enter-N-Go
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If a Passive Entry door handle has not been used for NOTE: For emergency exit from the rear seats when the Child-Protection Door Lock System is engaged, manually 72 hours, the Passive Entry feature for the handle may raise the door lock knob to the unlocked position, roll time out.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Settings (Customer-Programmable Features)” in “Under- standing Your Instrument Panel” for further information. To Unlock From The Passenger Side: With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors automati- cally.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Preventing Inadvertent Locking Of Passive Entry RKE To Enter The Liftgate Transmitter In Vehicle With a valid Passive Entry RKE transmitter within 3 ft To minimize the possibility of unintentionally locking a (1.0 m) of the liftgate, press the button on the right side of Passive Entry RKE transmitter inside your vehicle, the the chrome accent bar, which is located on the liftgate...
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 NOTE: If “Unlock All Doors 1st Press” is programmed in EVIC, all doors will unlock when you push the button on the liftgate. If Unlock Driver Door 1st press is programmed in EVIC, the liftgate and Flipper glass will unlock when you press the button on the liftgate For further information, refer to “Electronic Vehicle Informa- tion...
Page 44: Windows
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: passenger and rear passenger door windows. The win- • After pressing the door handle LOCK button, you dow controls will operate only when the ignition switch must wait two seconds before you can lock or unlock is in the ON/RUN or ACC position.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 The power window switches remain active for 10 min- WARNING! utes after the ignition has been turned OFF. Opening either front door will cancel this feature. Never leave children in a vehicle with the key in the ignition switch or leave a vehicle with Keyless Enter- Auto Up Feature With Anti-Pinch Protection —...
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE during Auto Up. If this happens, pull the switch lightly to Window Lockout Button the first detent and hold it to close the window manually. The Window Lockout button on the driver’s door allows you to disable the window controls on the rear doors.
Page 47: Wind Buffeting
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
Page 48: Liftgate Flipper Glass
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Liftgate Flipper Glass Once the liftgate flipper glass has been opened, connec- The liftgate flipper glass is also unlocked when the tion to the rear window wiper is interrupted, preventing liftgate is unlocked. To open the flipper glass, push up on activation of the rear wiper blade while the flipper glass the window switch located on the liftgate.
Page 49: Power Liftgate - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Power Liftgate — If Equipped To operate the power liftgate manually in the open The power liftgate may be opened by pulling direction, pull the liftgate handle once to initiate a power up on the liftgate handle or by pressing the cycle and then pull the handle a second time to put LIFTGATE button on the Remote Keyless Entry...
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If anything obstructs the power liftgate while it is WARNING! closing or opening, the liftgate will automatically reverse to the closed or open position, provided it During power operation, personal injury or cargo meets sufficient resistance.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 • If the liftgate handle is pulled while the power liftgate WARNING! is opening, the liftgate motor will disengage to allow • Driving with the liftgate open can allow poison- manual operation. ous exhaust gases into your vehicle.
Page 52: Occupant Restraints
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee bolsters for front seat occupants OCCUPANT RESTRAINTS Some of the most important safety features in your • Front seat belts incorporate pretensioners that may vehicle are the restraint systems: enhance occupant protection by managing occupant •...
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 infant and child restraint systems. For more information Children that are not big enough to wear the vehicle seat on LATCH, refer to Lower Anchors and Tether for belt properly (see section on Child Restraints) should be CHildren (LATCH).
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. The driver and front passenger seats should be WARNING! moved back as far as practical to allow the Advanced • Relying on the air bags alone could lead to more Front Air Bags room to inflate. severe injuries in a collision.
Page 55: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Research has shown that seat belts save lives, and they WARNING! (Continued) can reduce the seriousness of injuries in an accident. • Supplemental Side Air Bag Inflatable Curtain Some of the worst injuries happen when people are (SABIC) and Seat-Mounted Side Air Bags (SAB) thrown from the vehicle.
Page 56: Lap/Shoulder Belt Operating Instructions
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • It is dangerous to ride in a cargo area, inside or • Wearing a seat belt incorrectly is dangerous. Seat outside of a vehicle. In an accident, people riding belts are designed to go around the large bones of in these areas are more likely to be seriously your body.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 2. The seat belt latch plate is above the back of your seat. 3. When the belt is long enough to fit, insert the latch Grasp the latch plate and pull out the belt. Slide the latch plate into the buckle until you hear a “click.”...
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • A belt that is worn under your arm is dangerous. • A belt that is buckled into the wrong buckle will Your body could strike the inside surfaces of the not protect you properly.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 4. Position the lap belt across your thighs, below your 5. Position the shoulder belt on your chest so that it is abdomen. To remove slack in the lap portion, pull up a comfortable and not resting on your neck.
Page 60: Lap/Shoulder Belt Untwisting Procedure
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. Lap/Shoulder Belt Untwisting Procedure The belt will automatically retract to its stowed position. Use the following procedure to untwist a twisted lap/ If necessary, slide the latch plate down the webbing to shoulder belt.
Page 61: Adjustable Upper Shoulder Belt Anchorage
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Adjustable Upper Shoulder Belt Anchorage As a guide, if you are shorter than average, you will In the front seating positions, the shoulder belt can be prefer a lower position, and if you are taller than average, adjusted upward or downward to position the belt away you will prefer a higher position.
Page 62: Automatic Locking Retractor Mode (Alr) - If Equipped
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE additional information, refer to “Installing Child Re- ratcheting sound as the belt retracts. Allow the webbing straints Using The Vehicle Seat Belt” under the “Child to retract completely in this case and then carefully pull Restraints”...
Page 63: Energy Management Feature
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 How To Engage The Automatic Locking Mode WARNING! 1. Buckle the combination lap and shoulder belt. • The belt and retractor assembly must be replaced 2. Grasp the shoulder portion and pull downward until if the seat belt assembly Automatic Locking Re- the entire belt is extracted.
Page 64: Seat Belt Pretensioners
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners identified by any markings, only through visual inspec- The seat belts for both front seating positions are tion of the head restraint. The head restraint will be split equipped with pretensioning devices that are designed to in two halves, with the front half being soft foam and remove slack from the seat belt in the event of an trim, the back half being decorative plastic.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 However if during a front impact, a secondary rear CAUTION! impact occurs, the AHR may deploy based on the sever- ity and type of the impact. All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an...
Page 66: Things To Know Before Starting Your Vehicle 11
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 2.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 AHR In Reset Position 3 — Final Downward Movement To Engage Locking Mecha- nism NOTE: • If you have difficulties or problems resetting the 4. The AHR front soft foam and trim half should lock Active Head Restraints, see an authorized dealer.
Page 68: Enhanced Seat Belt Use Reminder System (Beltalert )
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System unbuckled while traveling at speeds greater than 5 mph (BeltAlert ) (8 km/h), BeltAlert will provide both audio and visual BeltAlert is a feature intended to remind the driver and notification.
Page 69: Seat Belt Lock Out
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Seat Belt Lock Out extender should be used only if the existing belt is not The center rear seat belt system has a lock out feature that long enough. When it is not required, remove the ex- will not allow you to extract the center webbing unless tender and store it.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE instrument panel, above the glove compartment. The The Advanced Front Air Bags have a multistage inflator words SRS AIRBAG are embossed on the air bag covers. design. This allows the air bag to have different rates of inflation based on the severity and type of collision.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 • Instrument Panel This vehicle is equipped with Supplemental Seat- Mounted Side Air Bags (SAB) to provide enhanced • Knee Impact Bolster protection for an occupant during a side impact. The • Driver Advanced Front Air Bag Supplemental Seat-Mounted Side Air Bags are located in the outboard side of the front seats.
Page 72: Advanced Front Air Bag Features
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Advanced Front Air Bag Features WARNING! (Continued) The Advanced Front Air Bag system has multistage • Do not put anything on or around the air bag driver and front passenger air bags. This system provides covers or attempt to open them manually.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Supplemental Seat-Mounted Side Air Bags (SAB) When the air bag deploys, it opens the seam between the Supplemental Seat-Mounted Side Air Bags (SAB) may front and side of the seat’s trim cover. Each air bag provide enhanced protection to help protect an occupant deploys independently;...
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact and vehicle roll- over protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each air bag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for side-impact head injuries.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 NOTE: WARNING! • Air Bag covers may not be obvious in the interior trim, • Your vehicle is equipped with left and right but they will open during air bag deployment. Supplemental Side Air Bag Inflatable Curtain •...
Page 76: Air Bag Deployment Sensors And Controls
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front WARNING! (Continued) Air Bags work with the knee bolsters to provide im- • Your vehicle is equipped with SABIC air bags, do proved protection for the driver and front passenger. Side not have any accessory items installed which will air bags also work with seat belts to improve occupant alter the roof, including adding a sunroof to your...
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 certain frontal collisions depending on the severity and Because air bag sensors measure vehicle deceleration type of collision. Advanced Front Air Bags are not over time, vehicle speed and damage by themselves are expected to reduce the risk of injury in rear, side, or not good indicators of whether or not an air bag should rollover collisions.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Also, the ORC turns on the Air Bag Warning WARNING! Light in the instrument panel for approxi- mately four to eight seconds for a self-check Ignoring the Air Bag Warning Light in your instru- when the ignition is first turned on.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 are possible, based on the collision type and severity. The Based on the severity and type of collision, the side air steering wheel hub trim cover and the upper right side of bag inflator on the crash side of the vehicle may be the instrument panel separate and fold out of the way as triggered, releasing a quantity of non-toxic gas.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A quantity of non-toxic gas is generated to inflate the Front And Side Impact Sensors SABIC. The inflating SABIC pushes the outside edge of In front and side impacts, front and side impact sensors the headliner out of the way and covers the window.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 • As the air bags deflate, you may see some smoke-like If A Deployment Occurs The Advanced Front Air Bags are designed to deflate particles. The particles are a normal by-product of the immediately after deployment.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Air Bag System WARNING! WARNING! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, • Modifications to any part of the air bag system seat belt pretensioners, and the front seat belt retrac- could cause it to fail when you need it.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Air Bag Warning Light WARNING! (Continued) You will want to have the air bags ready to • Do not attempt to modify any part of your air bag inflate for your protection in a collision. The system.
Page 84: Event Data Recorder (Edr)
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • How various systems in your vehicle were operating; NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint • Whether or not the driver and passenger safety belts Controller (ORC) may also be disabled.
Page 85: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 To read data recorded by an EDR, special equipment is enough for an adult safety belt. Always check the child required, and access to the vehicle or the EDR is needed. seat Owner’s Manual to ensure you have the right seat In addition to the vehicle manufacturer, other parties, for your child.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE facing child safety seat. Two types of child restraints can WARNING! be used rearward-facing: infant carriers and convertible • Rearward-facing child seats must never be used in child seats. the front seat of a vehicle with the front passenger The infant carrier is only used rearward-facing in the air bag unless the air bag is turned off.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Here are some tips for getting the most out of your child restraint and slide the latch plate into the buckle. Then, restraint: pull the shoulder belt until it is fully extended from the retractor.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For additional information, refer to All children whose weight or height is above the www.seatcheck.org or call 1–866–SEATCHECK. Cana- forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts dian residents should refer to Transport Canada’s web- site for additional information: http://www.tc.gc.ca/ fit properly.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 • Check belt fit periodically. A child’s squirming or also have features for installation using the vehicle’s seat slouching can move the belt out of position. belts. Child restraints having tether straps and hooks for connection to the top tether anchorages have been avail- •...
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE webbing-mounted lower attachments and child seats the vehicle’s seat belts. For typical installation instruc- with fixed lower attachments. The rear seat lower an- tions, refer to “Installing The LATCH-Compatible Child chors can be readily identified by the symbol located on Restraint System”.
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Latch Anchorages Pulling Down The Carpet Floor Panel To Access Top Tether Strap In addition, there are top tether strap anchorages behind each rear seating position located on the back of the seat. To access the top tether strap anchorages behind the rear seat, pull the carpeted floor panel away from the seat back, this will expose the top tether strap anchorages.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap. Forward- facing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a...
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 gap panel. They are not visible until you fold the gap secure a Child Restraint System (CRS). These types of panel down. Do not use the cargo tie down hooks seat belts are designed to keep the lap portion of the seat located on the floor behind the seat.
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing a Child Restraint with an ALR: the upward position. To access the center seat arm rest tether first lower the arm rest. The tether is located 1. To install a child restraint with ALR, first, pull enough behind the armrest and hooked onto the plastic seat of the seat belt webbing from the retractor to route it backing.
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Pull down on the tether to unhook it from the plastic seat straints, and attach the hook to the top tether anchor backing, then raise the armrest and attach the tether hook located on the back of the seat.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Top Tether Strap Anchorage (Located on Seatback) Top Tether Strap Mounting...
Page 97: Engine Break-In Recommendations
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 behind the gap panel. Please note the top tether anchor- WARNING! ages are not visible until you fold the gap panel down. • An incorrectly anchored tether strap could lead to Do not use the cargo tie down hooks located on the floor behind the seats.
Page 98: Safety Tips
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While cruising, brief full-throttle acceleration within the should be considered a normal part of the break-in and limits of local traffic laws contributes to a good break-in. not interpreted as an indication of difficulty. Wide-open throttle acceleration in low gear can be detri- SAFETY TIPS mental and should be avoided.
Page 99: Exhaust Gas
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 Do not run the engine in a closed garage or in confined WARNING! (Continued) areas any longer than needed to move your vehicle in or • Do not allow people to ride in any area of your out of the area.
Page 100: Safety Checks You Should Make Inside The Vehicle
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE damaged, have a competent mechanic inspect the com- Air Bag Warning Light plete exhaust system and adjacent body areas for broken, The light should come on and remain on for four to eight damaged, deteriorated, or mispositioned parts.
Page 101 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Al- Pedals that cannot move freely can cause loss of ways properly reinstall and secure floor mats that vehicle control and increase the risk of serious per- have been removed for cleaning.
Page 102: Periodic Safety Checks You Should Make Outside The Vehicle
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 103: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......109 Tilt Mirrors In Reverse (Available With Memory Seat Only) —...
Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Things You Should Know About Your Power Lumbar — If Equipped ... 162 Uconnect™ Phone ....133 Manual Front Seats Forward/Rearward General Information .
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Setting Memory Positions And Linking Automatic Headlight Leveling — HID Remote Keyless Entry Transmitter To Headlights Only ..... 185 Memory .
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Change Assist ....191 Electronic Speed Control ....202 Flash-To-Pass .
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 To Cancel ......211 Parksense Sensors ....233 To Turn Off .
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overhead Console ..... 244 Power Sunroof — If Equipped ... . 255 Front Map/Reading Lights .
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Commandview Sunroof With Power Shade — Sunroof Maintenance ....262 If Equipped ......258 Ignition Off Operation .
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Retractable Cargo Area Cover — Rear Window Features ....278 If Equipped ......275 Rear Window Wiper/Washer .
Page 111: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. The mirror should be adjusted while set in the day position (toward the windshield).
Page 112: Automatic Dimming Mirror - If Equipped
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light in the button will illuminate to indicate when the dim- ming feature is activated.
Page 113: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Outside Mirrors Outside Mirrors Folding Feature To receive maximum benefit, adjust the outside mirrors All outside mirrors are hinged and may be moved either to center on the adjacent lane of traffic with a slight forward or rearward to resist damage.
Page 114: Heated Mirrors - If Equipped
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE mirror, press the mirror select button for the mirror that Power mirror preselected positions can be controlled by you want to adjust. Using the mirror control switch, press the optional Memory Seat Feature. Refer to “Driver on any of the four arrows for the direction that you want Memory Seat”...
Page 115: Illuminated Vanity Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 shifted out of REVERSE position. Each stored memory setting will have an associated Tilt Mirrors in Reverse position. NOTE: The Tilt Mirrors in Reverse feature is not en- abled when delivered from the factory. The Tilt Mirrors in Reverse feature can be enabled or disabled in the Elec- tronic Vehicle Information Center (EVIC).
Page 116: Uconnect™ Phone - If Equipped
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • www.jeep.com/uconnect Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, in- • or call 1–877–855–8400 vehicle communications system. Uconnect™ Phone al- lows you to dial a phone number with your mobile Uconnect™...
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 system. Only one linked (or paired) mobile phone can be Voice Command Button used with the system at a time. The system is available in Actual button location may vary with the ra- English, Spanish, or French languages.
Page 118: Operation
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation example, you can use the compound form voice Voice commands can be used to operate the Uconnect™ command “Phonebook New Entry”, or you can break Phone and to navigate through the Uconnect™ Phone the compound form command into two voice com- menu structure.
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • When prompted, after the beep, say “Pair a Device” Cancel Command At any prompt, after the beep, you can say “Cancel” and and follow the audible prompts. you will be returned to the main menu. However, in a •...
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number phone to use if multiple mobile phones are in the vehicle at the same time. For example, if priority three and then dial. The number will appear in the display and priority five phones are present in the vehicle, the of certain radios.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • The Uconnect™ system will confirm the name and • When prompted, enter the number designation (e.g., then dial the corresponding phone number, which “Home”, “Work”, “Mobile”, or “Other”). This will may appear in the display of certain radios. allow you to store multiple numbers for each phone- book entry, if desired.
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Phonebook Download – Automatic Phonebook Transfer From Mobile Phone loaded, there may be a short delay before the latest If equipped and specifically supported by your phone, downloaded names can be used.
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Edit Uconnect™ Phonebook Entries After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in NOTE: the phonebook, call the number you just edited, or return •...
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the Phonebook Delete menu, you will Delete/Erase “All” Uconnect™ Phonebook Entries then be asked for the name of the entry that you wish • Press the button to begin. to delete.
Page 125: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 List All Names In The Uconnect™ Phonebook Phone Call Features The following features can be accessed through the • Press the button to begin. Uconnect™ Phone if the feature(s) are available on your •...
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer Or Reject An Incoming Call — Call in progress. To go back to the first call, refer to “Toggling Currently In Progress Between Calls” in this section. To combine two calls, refer If a call is currently in progress and you have another to “Conference Call”...
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Conference Call Call Termination When two calls are in progress (one active and one on To end a call in progress, momentarily press the hold), press and hold the button until you hear a button.
Page 128: Uconnect™ Phone Features
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Continuation Uconnect™ Phone Features Call continuation is the progression of a phone call on the Language Selection Uconnect™ Phone after the vehicle ignition key has been To change the language that the Uconnect™ Phone is switched to OFF.
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Emergency Assistance Canada and 060 for Mexico). The number dialed may If you are in an emergency and the mobile phone is not be applicable with the available mobile service and reachable: area. •...
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Towing Assistance Paging If you need towing assistance: To learn how to page, refer to “Working with Automated Systems”. Paging works properly except for pagers of • Press the button to begin. certain companies, which time out a little too soon to •...
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 When calling a number with your Uconnect™ Phone that The Uconnect™ Phone will then send the corresponding normally requires you to enter in a touch-tone sequence phone number associated with the phonebook entry, as on your mobile phone keypad, you can press the tones over the phone.
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts ON/OFF Dialing Using The Mobile Phone Keypad Turning confirmation prompts off will stop the system You can dial a phone number with your mobile phone from confirming your choices (e.g., the Uconnect™ keypad and still use the Uconnect™...
Page 133: Advanced Phone Connectivity
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Mute/Un-Mute (Mute OFF) from your Uconnect™ Phone paired mobile phone to the When you mute the Uconnect™ Phone, you will still be Uconnect™ Phone or vice versa, press the button able to hear the conversation coming from the other and say “Transfer Call”.
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say “List Phones”. • The selected phone will be used for the next phone call. If the selected phone is not available, the • The Uconnect™ Phone will play the phone names of Uconnect™...
Page 135: Things You Should Know About Your Uconnect™ Phone
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Things You Should Know About Your Uconnect™ You can either press the Uconnect™ Phone button to Phone restore the factory setting or repeat the words and phrases when prompted by the Uconnect™ Phone. For Uconnect™...
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, Voice Command • For best performance, adjust the rearview mirror to • dry weather condition. provide at least ⁄ in (1 cm) gap between the overhead • Even though the system is designed for users speaking console (if equipped) and the mirror.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 • Numbers must be spoken in single digits. “800” must • fully closed windows, be spoken “eight-zero-zero” not “eight hundred”. • dry weather conditions, and • You can say “O” (letter “O”) for “0” (zero). •...
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: Uconnect™ Phone can read or send new messages on You can send messages using Uconnect™ Phone. To send your phone. a new message: • Press the Read Messages: button. If you receive a new text message while your phone is •...
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 List of Preset Messages: 14. Are you there yet? 1. Yes 15. Where are we meeting? 2. No 16. Can this wait? 3. Where are you? 17. Bye for now 4. I need more direction. 18.
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Bluetooth Communication Link Power-Up Mobile phones have been found to lose connection to the After switching the ignition key from OFF to either the Uconnect™ Phone. When this happens, the connection ON or ACC position, or after a language change, you can generally be reestablished by switching the phone must wait at least fifteen seconds prior to using the off/on.
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139...
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141...
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 146: General Information
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
Page 147: Commands
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 NOTE: If you do not say a command within a few When using this system, you should speak clearly and at seconds, the system will present you with a list of a normal speaking volume. options.
Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Memo” (to switch to the memo recorder) Changing the Volume • “Setup” (to switch to system setup) 1. Start a dialogue by pressing the Voice Command button. Radio AM 2. Say a command (e.g., “Help”). To switch to the AM band, say “AM”...
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 • “Previous Channel” (to select the previous channel) Radio FM To switch to the FM band, say “FM” or “Radio FM”. In • “List Channel” (to hear a list of available channels) this mode, you may say the following commands: •...
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Memo − “Previous” (to play the previous memo) To switch to the voice recorder mode, say “Memo”. In − “Delete” (to delete a memo) this mode, you may say the following commands: • “Delete All” (to delete all memos) •...
Page 151: Voice Training
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 In this mode, you may say the following commands: Voice Training For users experiencing difficulty with the system recog- • “Language English” nizing their voice commands or numbers the Uconnect™ • “Language French” Voice “Voice Training”...
Page 152: Blind Spot Monitoring - If Equipped
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE BLIND SPOT MONITORING — IF EQUIPPED When the vehicle is started, the BSM warning light will The Blind Spot Monitoring (BSM) system uses two radar- momentarily illuminate in both outside rear view mirrors based sensors, located inside the rear bumper fascia, to to let the driver know that the system is operational.
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 • The BSM system detection zone DOES NOT change if your vehicle is towing a trailer. Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change. If the trailer or other object (i.e., bicycle, sports equipment) extends beyond the side of your vehicle, this may result in the BSM warning light remaining illuminated the entire...
Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE audible (chime) alert and reducing the radio volume. Entering From The Side Refer to “Modes Of Operation” for further information. Vehicles that move into your adjacent lanes from either side of the vehicle. Warning Light Location Side Monitoring The BSM system monitors the detection zone from three...
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Entering From The Rear Overtaking Traffic Vehicles that come up from behind your vehicle on either If you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains in side and enter the rear detection zone with a relative the blind spot for approximately 1.5 seconds, the warning speed of less than 30 mph (48 km/h).
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 The BSM system will not alert you of objects that are WARNING! traveling in the opposite direction of the vehicle in adjacent lanes. The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones.
Page 158: Rear Cross Path
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cross Path The Rear Cross Path (RCP) feature is intended to aid the driver when backing out of parking spaces where their vision of oncoming vehicles may be blocked. Proceed slowly and cautiously out of the parking space until the rear end of the vehicle is exposed.
Page 159: Modes Of Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 NOTE: In a parking lot situation, oncoming vehicles can Modes Of Operation be obscured by vehicles parked on either side. If the Three selectable modes of operation are available in the sensors are blocked by other structures or vehicles, the Electronic Vehicle Information Center (EVIC).
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE signal is then activated, and it corresponds to an alert Blind Spot Alert Off present on that side of the vehicle, an audible chime will When the BSM system is turned off there will be no also be sounded.
Page 161: Seats
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 SEATS are located on the outboard side of the seat. There are two Seats are part of the Occupant Restraint System of the switches that control the movement of the seat cushion vehicle. and the seatback.
Page 162 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Forward Or Rearward Reclining The Seatback The seat can be adjusted both forward and rearward. The angle of the seatback can be adjusted forward or Push the seat switch forward or rearward, the seat will backward.
Page 163: Passenger's Power Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Passenger’s Power Seat WARNING! (Continued) Some models are equipped with a six-way power pas- • Do not ride with the seatback reclined so that the senger seat. The power seat switch is located on the shoulder belt is no longer resting against your outboard side of the seat.
Page 164: Power Lumbar - If Equipped
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the seat switch, the front of the seat cushion will move in CAUTION! the direction of the switch. Release the switch when you have reached the desired position. Do not place any article under a power seat or impede its ability to move as it may cause damage to WARNING! the seat controls.
Page 165: Manual Front Seats Forward/Rearward Adjustment
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Power Lumbar Switch Adjustment Bar Manual Front Seats Forward/Rearward While sitting in the seat, lift up on the bar located under Adjustment the seat cushion and move the seat forward or rearward. Some models may be equipped with manual front driver Release the bar once you have reached the desired or passenger seats.
Page 166: Manual Front Passenger Seatback Adjustment - Recline
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 167: Front Passenger Seat Fold-Flat Feature - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Front Passenger Seat Fold-Flat Feature — If Heated Seats — If Equipped Equipped On some models, the front and rear seats may be To fold the seatback to the flat load-floor position, lift the equipped with heaters in both the seat cushions and recline lever and push the seatback forward.
Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE controls for each heater are located near the bottom WARNING! (Continued) center of the instrument panel (below the climate con- • Do not place anything on the seat that insulates trols). against heat, such as a blanket or cushion. This You can choose from HIGH, LOW or OFF heat settings.
Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 the system will automatically switch to LOW-level after a maximum of 50 minutes of continuous operation. At that time, the number of illuminated LEDs changes from two to one, indicating the change. The LOW-level setting will turn OFF automatically after a maximum of 45 minutes.
Page 170: Ventilated Seats - If Equipped
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select HIGH-level small fans that draw the air from the passenger compart- heating. Press the switch a second time to select ment and blow air through fine perforations in the seat LOW-level heating.
Page 171: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: The engine must be running for the ventilated WARNING! seats to operate. The head restraints for all occupants must be prop- Vehicles Equipped With Remote Start erly adjusted prior to operating the vehicle or occu- On models that are equipped with remote start, the pying a seat.
Page 172 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts.
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Active Head Restraint (Normal Position) Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer.
Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In the event of deployment of an Active Head Re- WARNING! (Continued) straint, refer to “Occupant Restraints/Resetting Active • Active Head Restraints may be deployed if they Head Restraints (AHR)” in “Things To Know Before are struck by an object such as a hand, foot or loose Starting Your Vehicle”...
Page 175: 60/40 Split Rear Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 The center head restraint has limited adjustment. Lift WARNING! upward on the head restraint to raise it, or push down- ward on the head restraint to lower it. Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision.
Page 176 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Be sure that the front seats are fully upright and NOTE: • Do not fold the 60% rear seat down with the left positioned forward. This will allow the rear seatback to fold down easily.
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 To Raise Rear Seat WARNING! (Continued) Raise the rear seatback and lock it into place. If interfer- • The cargo area in the rear of the vehicle (with the ence from the cargo area prevents the seatback from fully rear seatbacks in the locked-up or folded down locking, you will have difficulty returning the seat to its position) should not be used as a play area by...
Page 178: Reclining Rear Seat
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining Rear Seat WARNING! To recline the seatback, lift the lever located on the outboard side of the seat, lean back and release the lever Do not ride with the seatback reclined so that the at the desired position.
Page 179: Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory NOTE: Each time the S (SET) button and a numbered button 1 or 2 are pressed, you erase the memory settings for that button and store a new one. 1.
Page 180: Memory Position Recall
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Turn on the radio and set the radio station presets (up to “Electronic Vehicle Information Center (EVIC)/ to 12 AM and 12 FM stations can be set). Customer-Programmable Features” in “Understanding Your Instrument Panel” for further information. 6.
Page 181: To Disable A Rke Transmitter Linked To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 To recall the memory setting for driver two, press 3. Press and release the memory S (SET) button located MEMORY button number 2 on the driver’s door, or the on the driver’s door. UNLOCK button on the RKE transmitter linked to 4.
Page 182: Easy Entry/Exit Seat
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Easy Entry/Exit Seat driving position when the key is placed into the This feature provides automatic driver’s seat positioning ignition, and turned out of the LOCK position toward which will enhance driver mobility out of and into the the ACC/ON position.
Page 183: To Open And Close The Hood
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. 1. Pull the release lever located below the instrument panel and in front of the driver’s door. Safety Latch Location CAUTION! To prevent possible damage, do not slam the hood to close it.
Page 184: Lights
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
Page 185: Automatic Headlights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 NOTE: Automatic Headlights — If Equipped • Your vehicle is equipped with plastic headlight and This system automatically turns the headlights on or off fog light (if equipped) lenses that are lighter and less according to ambient light levels.
Page 186: Smartbeam™ - If Equipped
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Information Center (EVIC)/Customer-Programmable inside rearview mirror. This camera detects vehicle spe- Features” in “Understanding Your Instrument Panel” for cific light and automatically switches from high beams to further information. low beams until the approaching vehicle is out of view. If your vehicle is equipped with a “Rain Sensitive Wiper NOTE: If the windshield or SmartBeam™...
Page 187: Daytime Running Lights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 NOTE: This system will not activate until the vehicle is not in the PARK position. The lights will remain on until at or above 20 mph (32 km/h). the ignition is switched to the OFF or ACC position or the parking brake is engaged.
Page 188: Parking Lights And Panel Lights
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE on, and then the headlight switch is cycled off. Headlight delay can be cancelled by either turning the headlight switch on then off, or by turning the ignition ON. The headlight delay time is programmable on vehicles equipped with an Electronic Vehicle Information Center (EVIC).
Page 189: Interior Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 turn off when the switch is pushed a second time, when supplement the brightness of the odometer, trip odom- the headlight switch is rotated to the off position, or the eter, radio and overhead console by rotating the control high beam is selected.
Page 190: Ambient Light Color Control - If Equipped
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ambient Light Color Control — If Equipped Lights-On Reminder Ambient lights are located under the instrument panel If the headlights, parking lights, or cargo lights are left on and the driver’s and passenger’s front seats. The color of after the ignition is turned OFF, a chime will sound when the ambient lights can be changed by pressing the button the driver’s door is opened.
Page 191: Front Map/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 Front Map/Reading Lights second time. The lights will also turn on when the UNLOCK button on the Remote Keyless Entry (RKE) is The front map/reading lights are mounted in the over- pressed. head console. Front Map/Reading Light Switches Front Map/Reading Lights Each light can be turned on by pressing a switch on either...
Page 192: Ambient Light
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ambient Light Multifunction Lever The overhead console is equipped with an ambient light The multifunction lever is located on the left side of the feature. This light casts illumination for improved visibil- steering column. ity of the floor center console and PRNDL area.
Page 193: Turn Signals
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Turn Signals Flash-To-Pass Move the multifunction lever up or down and the arrows You can signal another vehicle with your headlights by on each side of the instrument cluster flash to show partially pulling the multifunction lever toward the steer- proper operation of the front and rear turn signal lights.
Page 194: Windshield Wipers And Washers
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer control lever is located on the left side of the steering column. The front wipers are operated by rotating a switch, located on the end of the lever.
Page 195: Windshield Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Windshield Wiper Operation CAUTION! Rotate the end of the lever to one of the first four detent positions for intermittent settings, the fifth detent for low Always remove any buildup of snow that prevents wiper operation and the sixth detent for high wiper the windshield wiper blades from returning to the operation.
Page 196: Intermittent Wiper System
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System Use one of the four intermittent wiper settings when weather conditions make a single wiping cycle, with a variable delay between cycles, desirable. At driving speeds above 10 mph (16 km/h), the delay can be regulated from a maximum of approximately 18 seconds between cycles (first detent), to a cycle every one second (fourth detent).
Page 197: Windshield Washer Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Windshield Washer Operation To use the washer, push on the end of the lever (toward the steering wheel) and hold while spray is desired. If the lever is pushed while in the intermittent setting, the wipers will turn on and operate for several wipe cycles after the end of the lever is released, and then resume the intermittent interval previously selected.
Page 198: Mist
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use.
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 • Use of Rain-X or products containing wax or silicone from the windshield washers of the vehicle ahead. Rotate the end of the multifunction lever to one of four settings may reduce Rain Sensing performance. to activate this feature.
Page 200: Tilt/Telescoping Steering Column
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Transmission In NEUTRAL Position — When the ignition is ON, and the transmission is in the NEU- TRAL position, the Rain Sensing system will not operate until the wiper switch is moved, vehicle speed is greater than 5 mph (8 km/h), or the shift lever is moved out of the NEUTRAL position.
Page 201: Power Tilt/Telescoping Steering Column - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle.
Page 202: Heated Steering Wheel - If Equipped
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE transmitter or the memory switch on the driver’s door HEATED STEERING WHEEL — IF EQUIPPED trim panel to return the tilt/telescopic steering column to The steering wheel contains a heating element that helps pre-programmed positions.
Page 203 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 NOTE: The engine must be running for the heated WARNING! steering wheel to operate. • Persons who are unable to feel pain to the skin Vehicles Equipped With Remote Start because of advanced age, chronic illness, diabetes, On models that are equipped with remote start, the spinal cord injury, medication, alcohol use, ex- heated steering wheel can be programmed to come on...
Page 204: Electronic Speed Control
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 20 mph (32 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel. 1 —...
Page 205: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 System can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle vehicle set speed. has reached the desired speed, press the SET (-) button and release.
Page 206: To Resume Speed
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Speed decrease until the button is released. Release the button To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release.
Page 207: Adaptive Cruise Control (Acc) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 On steep hills, a greater speed loss or gain may occur so ACC will allow you to keep cruise control engaged in it may be preferable to drive without Electronic Speed light to moderate traffic conditions without the constant Control.
Page 208 206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) − Cannot take street, traffic, and weather conditions • Adaptive Cruise Control (ACC) is a convenience into account, and may be limited upon adverse sight system. It is not a substitute for active driving distance conditions.
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 The Cruise Control system has two control modes: WARNING! • Adaptive Cruise Control mode for maintaining an You should switch off the ACC system: appropriate distance between vehicles. • When driving in fog, heavy rain, heavy snow, •...
Page 210: Adaptive Cruise Control (Acc) Operation
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control (ACC) Operation NOTE: Any chassis/suspension modifications to the The speed control buttons (located on the right side of the vehicle will effect the performance of the Adaptive Cruise steering wheel) operates the ACC system. Control.
Page 211: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 • When the automatic transmission is in PARK, RE- VERSE or NEUTRAL. • When pushing the RES + button without a previously set speed in memory. To Activate Push and release the ON/OFF button. The ACC menu in the EVIC displays “Adaptive Cruise Ready.”...
Page 212: To Set A Desired Acc Speed
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could acciden- tally set the system or cause it to go faster than you want. You could lose control and have a collision. Always leave the system off when you are not using To Set A Desired ACC Speed When the vehicle reaches the speed desired, push the...
Page 213: To Cancel
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 • The system will not be controlling the distance be- To Cancel tween your vehicle and the vehicle ahead. The vehicle The system will disable ACC without erasing the speed will only be determined by the position of the memory if: accelerator pedal.
Page 214: To Turn Off
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You turn OFF the ignition. NOTE: If ACC is resumed or set with the ESC/TCS off, ESC will automatically be re-engaged. • You switch to Four-Wheel Drive Low. To Resume Speed Press the RES + button and release. Then remove your foot from the accelerator pedal.
Page 215: To Vary The Speed Setting
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 To Vary The Speed Setting Pressing the SET - button once will result in a 1 mph While ACC is set, you can increase the set speed by (1.6 km/h) decrease in set speed. Each subsequent tap of pressing and holding the RES + button.
Page 216: Setting The Following Distance In Acc
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting The Following Distance In ACC The specified following distance for ACC can be set by varying the distance setting between 3 (long), 2 (me- dium), and 1 (short). Using this distance setting and the vehicle speed, ACC calculates and sets the distance to the vehicle ahead.
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 same lane, the EVIC displays the “Sensed Vehicle Indi- cator” icon, and the system adjusts vehicle speed auto- matically to maintain the distance setting, regardless of the set speed. The vehicle will then maintain the set distance until: •...
Page 218: Adaptive Cruise Control (Acc) Menu
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The maximum braking applied by ACC is limited; how- provide an additional acceleration based on your current ever, the driver can always apply the brakes manually, if speed. The acceleration is triggered by indicating a left necessary.
Page 219 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 cluster between the speedometer and the tachometer. The ACC SET information it displays depends on ACC system status. − When ACC is set, the set speed will display. Press the MENU button (located on the steer- The set speed will continue to display in place of the ing wheel) repeatedly until one of the follow- odometer reading when changing the EVIC display...
Page 220: Display Warnings And Maintenance
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ACC screen will display once again if any ACC Display Warnings And Maintenance activity occurs, which may include any of the following: “Clean Radar Sensor In Front Of Vehicle” Warning • Set Speed Change The ACC “Clean Radar Sensor In Front Of Vehicle”...
Page 221 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 If weather conditions are not a factor, the driver should examine the sensor. It may require cleaning or removal of an obstruction. The sensor is located in the center of the vehicle behind the lower grille. To keep the ACC System operating properly, it is impor- tant to note the following maintenance items: •...
Page 222 220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Do not attach or install any accessories near the sensor, Removing ACC Sensor For Off-Roading including transparent material or aftermarket grilles. NOTE: When off-roading, it may be advisable to re- Doing so could cause an ACC system failure or move the ACC sensor.
Page 223 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 NOTE: Do not change the adjustment fasteners or pull ACC Unavailable Warning the sensor off of the bracket. Doing so may misalign the If the system turns off, and the EVIC displays “ACC/ sensor.
Page 224: Precautions While Driving With Acc
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Service ACC Warning Precautions While Driving With ACC If the system turns off, and the EVIC displays “ACC/ In certain driving situations, ACC may have detection FCW Unavailable Service Radar Sensor”, it indicates issues.
Page 225 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 Offset Driving Turns And Bends ACC may not detect a vehicle in the same lane that is When driving on a curve with ACC engaged, the system offset from your direct line of travel. There will not be may decrease the vehicle speed and acceleration for sufficient distance to the vehicle ahead.
Page 226 224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using ACC On Hills Lane Changing When driving on hills, ACC may not detect a vehicle in ACC will not detect a vehicle until it is completely in the your lane. Depending on the speed, vehicle load, traffic lane in which you are traveling.
Page 227 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 Narrow Vehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There will not be suffi- cient distance to the vehicle ahead.
Page 228: General Information
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Stationary Objects And Vehicles General Information ACC does not react to stationary objects and stationary FCC Requirements For Vehicular Radar Systems vehicles. For example, ACC will not react in situations Classification Specifications: where the vehicle you are following exits your lane and 47 C.F.R.
Page 229 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 To Vary The Speed Setting WARNING! There are two ways to change the set speed: In the normal Cruise Control mode, the system will • Use the accelerator pedal to adjust the vehicle to the not react to vehicles ahead.
Page 230: Forward Collision Warning - If Equipped
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Forward Collision Warning — If Equipped Press the RES + button and then remove your foot from Forward Collision Warning (FCW) warns the driver of a the accelerator pedal. The EVIC will display the last set potential collision with the vehicle in front of you and speed.
Page 231 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 guard rails or sign posts based on the course predic- tion. This is expected and is a part of normal FCW activation and functionality. WARNING! Forward Collision Warning (FCW) is not intended to avoid a collision on its own, nor can FCW detect every type of potential collision.
Page 232 230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE FCW settings can only be changed when the vehicle is in Changing the FCW status to the “Near” setting, allows PARK. the system to warn you of a possible collision with the vehicle in front of you when you are much closer. This The default status of FCW is the “Far”...
Page 233 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in front of you. FCW Off Example NOTE: • The system will retain the last setting selected by the driver after ignition shut down.
Page 234 232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE of the car, stationary objects that are far away, oncom- there is an internal system fault. Although the vehicle is ing traffic, or leading vehicles with the same or higher still drivable under normal conditions, have the system rate of speed.
Page 235: Parksense Rear Park Assist - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 PARKSENSE REAR PARK ASSIST — IF ParkSense Sensors EQUIPPED The four ParkSense sensors, located in the rear fascia/ The ParkSense Rear Park Assist system provides visual bumper, monitor the area behind the vehicle that is and audible indications of the distance between the rear within the sensors’...
Page 236: Parksense Display
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ParkSense Warning Display is located in the Instru- ParkSense Display ment cluster’s EVIC display. It provides both visual and When the vehicle is in REVERSE, the warning display audible warnings to indicate the distance between the will turn ON indicating the system status.
Page 237 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
Page 238 236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fast Tone Continuous Tone The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle:...
Page 239 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 WARNING ALERTS Rear Distance Greater than 79-39 in 39-25 in 25-12 in Less than (in/cm) 79 in (200 cm) (200-100 cm) (100-65 cm) (65-30 cm) 12 in (30 cm) Audible Alert None Single 1/2 Slow Fast Continuous...
Page 240: Enabling And Disabling Parksense
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Enabling And Disabling ParkSense The ParkSense switch LED will be ON when Park- ParkSense can be enabled and disabled with a switch Sense is disabled or defective. The ParkSense switch located in the switch bank of the instrument panel or LED will be OFF when the system is enabled.
Page 241: Cleaning The Parksense System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 If “CLEAN PARK ASSIST SENSORS” appears in the ParkSense System Usage Precautions Electronic Vehicle Information Center (EVIC) make sure NOTE: the rear fascia/bumper is clean and clear of snow, ice, • Ensure that the rear bumper is free of snow, ice, mud, mud, dirt or other obstruction and then cycle the ignition.
Page 242 240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • ParkSense , when on, will MUTE the radio when it is • On vehicles equipped with a tailgate, ParkSense sounding a tone. should be disabled when the tailgate is in the lowered or open position and the vehicle is in REVERSE.
Page 243 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 WARNING! WARNING! (Continued) • Before using the ParkSense Rear Park Assist • Drivers must be careful when backing up even System, it is strongly recommended that the ball when using the ParkSense Rear Park Assist Sys- mount and hitch ball assembly is disconnected tem.
Page 244: Parkview Rear Back Up Camera - If Equipped
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKVIEW REAR BACK UP CAMERA — IF When the vehicle is shifted out of REVERSE, the rear EQUIPPED camera mode is exited and the navigation or audio screen Your vehicle may be equipped with the ParkView Rear appears again.
Page 245: Turning Parkview On Or Off - With Navigation/Multimedia Radio
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 WARNING! CAUTION! (Continued) • To avoid vehicle damage, the vehicle must be Drivers must be careful when backing up even when driven slowly when using ParkView to be able to using the ParkView Rear Back Up Camera. Always stop in time when an obstacle is seen.
Page 246: Turning Parkview On Or Off - Without Navigation/Multimedia Radio
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Enable or disable the rear camera feature by selecting the “enable rear camera in reverse” soft-key. 5. Press the “save” soft-key. Turning ParkView On Or Off — Without Navigation/Multimedia Radio 1. Press the “menu” hard-key. 2.
Page 247: Sunglass Bin Door
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 Sunglass Bin Door At the front of the console a compartment is provided for the storage of a pair of sunglasses. The storage compart- ment access is a “push/push” design. Push the chrome pad on the door to open.
Page 248: Garage Door Opener - If Equipped
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink replaces up to three hand-held transmitters that operate devices such as garage door openers, motor- ized gates, lighting or home security systems. The HomeLink unit is powered by your vehicles 12 Volt battery.
Page 249: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 For more efficient programming and accurate transmis- sion of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink system.
Page 250: Programming A Rolling Code
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming A Rolling Code For programming garage door openers that were manu- factured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is attached to the garage door opener.
Page 251 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 3. Simultaneously press and hold both the Homelink NOTE: You have 30 seconds in which to initiate the next button you want to program and the hand-held transmit- step after the LEARN button has been pressed. ter button.
Page 252: Programming A Non-Rolling Code
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press and hold the desired HomeLink button until 4. Continue to hold both buttons and observe the indi- the indicator light begins to flash after 20 seconds. Do not cator light. The Homelink indicator will flash slowly and then rapidly after Homelink has received the fre- release the button.
Page 253: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 Reprogramming A Single HomeLink Button to pick up the signal during programming. Similar to this To reprogram a channel that has been previously trained, Canadian law, some U.S. gate operators are designed to follow these steps: time-out in the same manner.
Page 254: Using Homelink
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Watch for the HomeLink indicator to change flash Reprogramming A Single HomeLink Button rates. When it changes, it is programmed. It may take up To reprogram a channel that has been previously trained, to 30 seconds or longer in rare cases.
Page 255: Security
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 Security Troubleshooting Tips It is advised to erase all channels before you sell or turn If you are having trouble programming HomeLink , here in your vehicle. are some of the most common solutions: •...
Page 256: General Information
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information WARNING! This device complies with FCC rules Part 15 and Industry • Your motorized door or gate will open and close Canada RSS-210. Operation is subject to the following two conditions: while you are programming the universal trans- ceiver.
Page 257: Power Sunroof - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located between the sun • Never leave children in a vehicle with the key in visors on the overhead console. the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Page 258: Opening Sunroof - Express
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express movement and the sunroof will remain in a partially Press the switch rearward and release it within one-half closed condition until the switch is pushed and held second and the sunroof will open automatically from any forward again.
Page 259: Venting Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 NOTE: If three consecutive sunroof close attempts re- Wind Buffeting sult in Pinch Protect reversals, the fourth close attempt Wind buffeting can be described as the perception of will be a Manual Close movement with Pinch Protect pressure on the ears or a helicopter-type sound in the disabled.
Page 260: Commandview Sunroof With Power Shade - If Equipped
258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE this feature. The time is programmable. Refer to “Elec- tronic Vehicle Information Center (EVIC)/Personal Set- tings (Customer-Programmable Features)” in “Under- standing Your Instrument Panel” for further information. COMMANDVIEW SUNROOF WITH POWER SHADE — IF EQUIPPED The CommandView sunroof switch is located to the left between the sun visors on the overhead console.
Page 261: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 Opening Sunroof — Express WARNING! Press the switch rearward and release it within one-half • Never leave children in a vehicle with the key in second and the sunroof will open automatically from any position.
Page 262: Closing Sunroof - Express
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Closing Sunroof — Express automatically. This is called “Express Open”. During Press the switch forward and release it within one-half Express Open operation, any movement of the shade second and the sunroof will close automatically from any switch will stop the shade.
Page 263: Closing Power Shade - Manual Mode
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 Closing Power Shade — Manual Mode Pinch Protect Override To close the shade, press and hold the switch in the If a known obstruction (ice, debris, etc.) prevents closing forward position. Any release of the switch will stop the the sunroof, press the switch forward and hold for two movement and the shade will remain in a partially closed seconds after the reversal occurs.
Page 264: Sunroof Maintenance
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunroof Maintenance ELECTRICAL POWER OUTLETS Use only a non-abrasive cleaner and a soft cloth to clean Your vehicle is equipped with 12 Volt (13 Amp) power the glass panel. outlets that can be used to power cellular phones, small electronics and other low powered electrical accessories.
Page 265 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 CAUTION! Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your New Vehicle Limited Warranty.
Page 266 264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE In addition to the front power outlet, there is also a power The rear power outlet is located in the right rear cargo outlet located in the storage area of the center console. area.
Page 267 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. •...
Page 268: Power Inverter - If Equipped
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED CAUTION! There is a 115 Volt, 150 Watt inverter outlet located on the • Many accessories that can be plugged in draw back of the center console to convert DC current to AC current.
Page 269 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 may have to be reset manually. To reset the inverter manually press the power inverter button OFF and ON. To avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter. The power inverter switch is located on the switch bank below the Climate Controls.
Page 270: Cupholders
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS WARNING! There are two cupholders for the front seat passengers located in the center console. To avoid serious injury or death: • Do not use a three-prong adaptor. • Do not insert any objects into the receptacles. •...
Page 271: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 There are two cupholders for the rear seat passengers STORAGE located in the fold-down center armrest. Glove Compartment The glove compartment is located on the right side of the instrument panel. Rear Cupholders Glove Compartment...
Page 272: Door Storage
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the glove compartment, pull outward on the Door Storage latch and lower the glove box door. Large storage areas are built into the door panels for easy access. Opened Glove Compartment Door Panel Storage...
Page 273: Center Console
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 Center Console To open the upper storage compartment, pull upward on The center console contains both an upper and a lower the small latch located on the lid. storage area. Storage Compartment Latches Storage Compartment...
Page 274: Cargo Area Features
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lift upward on the larger of the latches to access the WARNING! lower storage compartment. Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving.
Page 275 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 Press in on the flashlight to release it. To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. Press And Release Three-Press Switch...
Page 276: Cargo Storage Bins
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Storage Bins Two additional storage bins are located under the load There are four removable storage bins located in the rear floor. To access the lower storage bins, raise the load floor cargo area.
Page 277: Retractable Cargo Area Cover
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. To cover the cargo area: 1.
Page 278 276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. The liftgate may be opened with the cargo cover in WARNING! place. In a collision, a loose cargo cover in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle.
Page 279 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 WARNING! • To help protect against personal injury, passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only, not for passengers, who should sit in seats and use seat belts.
Page 280: Rear Window Features
278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES WARNING! (Continued) Rear Window Wiper/Washer • Do not carry loads which exceed the load limits described on the label attached to the left door or The rear wiper/washer is controlled by a rotary switch left door center pillar.
Page 281: If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 Rotate the center portion of the lever upward to the If the rear wiper is operating when the ignition is turned first detent for intermittent operation and to the OFF, the wiper will automatically return to the “park” second detent for continuous rear wiper operation.
Page 282: Roof Luggage Rack - If Equipped
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To prevent excessive battery drain, use the rear ROOF LUGGAGE RACK — IF EQUIPPED window defroster only when the engine is operating. The crossbars and siderails are designed to carry the weight on vehicles equipped with a luggage rack. The CAUTION! load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars.
Page 283 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 rack frame. Once the crossbar is in the desired position, CAUTION! retighten the with the wrench to lock the crossbar into • To prevent damage to the roof of your vehicle, do position. not carry any loads on the roof rack without the NOTE: crossbars installed.
Page 284 282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) WARNING! • Long loads which extend over the windshield, Cargo must be securely tied before driving your such as wood panels or surfboards, or loads with vehicle. Improperly secured loads can fly off the large frontal area should be secured to both the vehicle, particularly at high speeds, resulting in per- front and rear of the vehicle.
Page 285: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ....287 Engine Oil Change Indicator System ..312 Instrument Cluster ....288 Fuel Economy .
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL Keyless Enter-N-Go Display — Notes On Playing MP3 Files ... . 337 If Equipped ......319 Operation Instructions - Auxiliary Mode .
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 iPod /USB/MP3 Control — If Equipped ..356 Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1 ..372 Connecting The iPod Or External USB Device .
Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL Unwired Stereo Headphone Lifetime Climate Controls ..... . 401 Limited Warranty ....382 Dual-Zone Manual Heating And Air System Information .
Page 289: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 287 INSTRUMENT PANEL FEATURES 1 — Air Outlet 6 — Lower Switch Bank 11 — Hood Release 2 — Instrument Cluster 7 — Hazard Switch 12 — Fuel Door Release 3 — Radio 8 — Storage Bin 13 —...
Page 290: Instrument Cluster
288 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
Page 291: Instrument Cluster Descriptions
UNDERSTANDING YOUR INSTRUMENT PANEL 289 INSTRUMENT CLUSTER DESCRIPTIONS the ON/RUN position before engine start. If the bulb does not come on when turning the key from OFF to 1. Tachometer ON/RUN, have the condition checked promptly. Indicates the engine speed in revolutions per minute (RPM x 1000).
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL system. If this light remains on after several ignition WARNING! cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see A malfunctioning catalytic converter, as referenced your authorized dealer as soon as possible to have the above, can reach higher temperatures than in normal problem diagnosed and corrected.
Page 293 UNDERSTANDING YOUR INSTRUMENT PANEL 291 5. TOW/HAUL Indicator Light — If Equipped 9. Hill Descent Control Indicator Light — If Equipped This light will illuminate when the TOW/ The symbol indicates the status of the Hill HAUL button has been selected. The TOW/ Decent Control (HDC) feature.
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL as it was before the repair or service. If s/he cannot do so, has tires of a different size than the size indicated on the then the odometer must be set at zero, and a sticker must vehicle placard or tire inflation pressure label, you should be placed in the door jamb stating what the mileage was determine the proper tire inflation pressure for those...
Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 maintain correct tire pressure, even if under-inflation has tires or wheels on your vehicle, to ensure that the not reached the level to trigger illumination of the TPMS replacement or alternate tires and wheels allow the TPMS low tire pressure telltale.
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL 12. Park/Headlight ON Indicator — If Equipped 14. Brake Warning Light This indicator will illuminate when the park This light monitors various brake functions, lights or headlights are turned on. including brake fluid level and parking brake application.
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 The dual brake system provides a reserve braking capac- WARNING! ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is Driving a vehicle with the red brake light on is indicated by the Brake Warning Light, which will turn on dangerous.
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL The light also will turn on when the parking brake is brakes. If the ABS light does not turn on when the applied with the ignition switch in the ON/RUN posi- ignition switch is turned to the ON/RUN position, have tion.
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 18. Fuel Door Reminder 22. Electronic Vehicle Information Center (EVIC) Red The fuel pump symbol points to the side of the Telltale Area vehicle where the fuel door is located. This area will display the EVIC reconfigurable red tell- tales.
Page 300 298 UNDERSTANDING YOUR INSTRUMENT PANEL 25. Temperature Gauge WARNING! The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that A hot engine cooling system is dangerous. You or the engine cooling system is operating satisfactorily. others could be badly burned by steam or boiling coolant.
Page 301: Electronic Vehicle Information Center (Evic)
UNDERSTANDING YOUR INSTRUMENT PANEL 299 ELECTRONIC VEHICLE INFORMATION CENTER The EVIC consists of the following: (EVIC) • Fuel Economy The Electronic Vehicle Information Center (EVIC) fea- • ACC: (If Equipped) tures a driver-interactive display that is located in the instrument cluster. •...
Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by UP Button pressing the following buttons mounted on the steering Press and release the UP button to scroll up- wheel: ward through the main menus (Fuel Economy, Vehicle Info, Tire PSI, Cruise, Messages, Units, System Setup, Vehicle Speed, Trip Info, Turn Menu Off and sub-menus.
Page 303: Electronic Vehicle Information Center (Evic) Displays
UNDERSTANDING YOUR INSTRUMENT PANEL 301 • Service Keyless System (refer to Keyless Enter-N-Go, BACK Button Press the BACK button to scroll back to a Passive Entry - if equipped) previous menu or sub-menu. • Service Park Assist System • Park Assist System Blinded Electronic Vehicle Information Center (EVIC) •...
Page 304 302 UNDERSTANDING YOUR INSTRUMENT PANEL • Service Blind Spot System • ACC Set — After setting the desired speed in the ACC system. Refer to “Adaptive Cruise Control (ACC)” in • Blind Spot Detection Unavailable “Understanding The Features Of Your Vehicle” (if •...
Page 305 UNDERSTANDING YOUR INSTRUMENT PANEL 303 • ACC/FCW Unavailable Vehicle System Error — If the momentarily. Refer to “Adaptive Cruise Control (ACC)” in “Understanding The Features Of Your ACC system turns off due to a temporary malfunction Vehicle” (if equipped). that limits functionality. Refer to “Adaptive Cruise Control (ACC)”...
Page 306 304 UNDERSTANDING YOUR INSTRUMENT PANEL • Lights On • Remote Start Active — Push Start Button • Key In Ignition Lights On • Memory 1 Profile Set • Ignition Or Accessory On • Memory 2 Profile Set • Ignition Or Accessory On. Lights On •...
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 • Put In Park To Operate — Power Liftgate • To Tow Vehicle Safely, Read Neutral Shift Procedure In Owners Manual • Automatic High Beams On • For 4x4 Low Slow Below 5 Mph Or 8 Kph Put Trans In •...
Page 308 306 UNDERSTANDING YOUR INSTRUMENT PANEL • Off Road Ride Height Level 2 — This message is system which results in a complete system shutdown. displayed (for 5 seconds) when the vehicle has The system will be non operational at that point. achieved the Off Road Height Level 2.
Page 309: Evic White Telltale Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 307 • Air Suspension Temporarily Disabled For Jacking And • Electronic Speed Control ON Tire Change This light will turn on when the electronic speed control is ON. For further information, • Aerodynamic Ride Height — This is displayed (for refer to “Electronic Speed Control”...
Page 310: Evic Amber Telltale Lights
308 UNDERSTANDING YOUR INSTRUMENT PANEL • Adaptive Cruise Control (ACC) SET NOTE: • Even if power steering assistance is no longer opera- This light will turn on when the ACC is SET. For further information, refer to “Adaptive tional, it is still possible to steer the vehicle. Under Cruise Control (ACC)”...
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 • Air Suspension Up will display in the telltale display area. Tighten the fuel The air suspension up telltale will illuminate filler cap properly and press the SELECT button to turn when the air suspension is in use. For further off the message.
Page 312: Evic Red Telltale Lights
310 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Pressure Warning Light EVIC Red Telltale Lights This area will show reconfigurable red telltales. These This telltale indicates low engine oil pressure. If telltales include: the light turns on while driving, stop the vehicle and shut off the engine as soon as possible.
Page 313 UNDERSTANDING YOUR INSTRUMENT PANEL 311 vehicle is experiencing a problem with the charging If the light remains lit with the engine running, your system. Obtain SERVICE IMMEDIATELY. See an autho- vehicle will usually be drivable. However, see an autho- rized dealer. rized dealer for service as soon as possible.
Page 314: Engine Oil Change Indicator System
312 UNDERSTANDING YOUR INSTRUMENT PANEL If the light turns on while driving, safely pull over and CAUTION! stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the ve- Continuous driving with the Transmission Tempera- hicle.
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 after a single chime has sounded, to indicate the next 2. Fully depress the accelerator pedal, slowly, three times scheduled oil change interval. The engine oil change within 10 seconds. indicator system is duty cycle based, which means the 3.
Page 316: Fuel Economy
314 UNDERSTANDING YOUR INSTRUMENT PANEL Fuel Economy The Trip Functions mode displays the following informa- Press and release the UP or DOWN button until “Fuel tion: Economy” displays highlighted in the EVIC and press Average Fuel Economy / Fuel Saver Mode — If the SELECT button.
Page 317: Cruise Control
UNDERSTANDING YOUR INSTRUMENT PANEL 315 determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the SELECT button. NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the DTE displayed value.
Page 318: Vehicle Speed
316 UNDERSTANDING YOUR INSTRUMENT PANEL displayed in the menu line also. Press and release the Press and release the BACK button to return to the main SELECT (right arrow) button to display the following menu. information: Vehicle Speed • If equipped with ACC, one of several messages will be Press and release the UP or DOWN button until “Vehicle displayed giving a dynamic update of the status of the Speed”...
Page 319: Trip Info
UNDERSTANDING YOUR INSTRUMENT PANEL 317 Trip Info Trip B Press and release the UP or DOWN button until “Trip Shows the total distance traveled for Trip B since the last Info” displays highlighted in the EVIC and press the reset. SELECT button.
Page 320: Vehicle Info (Customer Information Features)
318 UNDERSTANDING YOUR INSTRUMENT PANEL • Trans Temperature down until the preferred setting is highlighted, then press and release the SELECT button until a check-mark Displays the actual transmission temperature. appears next to the setting, showing that the setting has •...
Page 321: Keyless Enter-N-Go Display - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 319 • Tire Pressure Monitor System (shows the current pres- NOTE: • Tires heat up during normal driving conditions. Heat sure of all four road tires). For additional information, refer to “Tire Pressure Monitor System” in “Starting will cause the tire pressure to increase from 2 to 6 psi And Operating”.
Page 322: Compass / Temperature Display
320 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Under certain conditions, the display may be display CAL until the compass is calibrated. You may superseded by another display of higher priority. But also calibrate the compass by completing one or more when the ignition switch position is changed, the display 360–degree turns (in an area free from large metal or always re-appears.
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 NOTE: Keep magnetic materials away from the top of 2. Press the UP or DOWN button until the Setup the instrument panel, such as iPod’s, Mobile Phones, (Customer-Programmable Features) menu is reached, Laptops and Radar Detectors. This is where the compass then press the SELECT button.
Page 324: Customer-Programmable Features (System Setup)
322 UNDERSTANDING YOUR INSTRUMENT PANEL for the zone where the vehicle is driven, per the zone Customer-Programmable Features (System map. For further information, refer to “Compass Vari- Setup) ance.” Personal Settings allows you to set and recall features when the transmission is in PARK. If the transmission is 1.
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 Italian (Italiano), German (Deutsch), and Dutch (Neder- feature showing the system has been activated, or the lands). Then, as you continue, the information will dis- check-mark is removed showing the system has been play in the selected language. deactivated.
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL Unlock All Doors 1st Press, all doors will unlock no make your selection, press and release the SELECT matter which Passive Entry equipped door handle is button a check-mark appears next to the feature showing grasped.
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 Horn With Remote Lock Flash Lamps With Lock When this feature is selected, a short horn sound will When this feature is selected, the front and rear turn occur when the RKE transmitter LOCK button is pressed. signals will flash when the doors are locked or unlocked This feature may be selected with or without the “Flash with the RKE transmitter.
Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL Headlamps With Wipers (Available with Automatic Easy Entry/Exit Seat (Available with Memory Seat Headlamps Only) Only) When this feature is selected, and the headlight switch is This feature provides automatic driver seat positioning to in the AUTO position, the headlights will turn on ap- enhance driver mobility when entering and exiting the proximately 10 seconds after the wipers are turned on.
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 REVERSE position. The mirrors will move back to their Illuminated Approach previous position when the transmission is shifted out of When this feature is selected, the headlights will activate REVERSE. To make your selection, press and release the and remain on for 0, 30, 60, or 90 seconds when the doors SELECT button until a check-mark appears next to the are unlocked with the RKE transmitter.
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL release the SELECT button until a check-mark appears Wiper Mode — If Equipped next to the feature showing the system has been activated When this feature is selected, the system will automati- or the check-mark is removed showing the system has cally activate the windshield wipers if it senses moisture been deactivated.
Page 331 UNDERSTANDING YOUR INSTRUMENT PANEL 329 Blind Spot Alert Take your vehicle to an authorized dealer to verify sensor There are three selections when operating Blind Spot alignment. Having a sensor that is misaligned will result Alert. By pressing and releasing the SELECT button once, in the BSM not operating to specification.
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL For further information, refer to ”Adaptive Cruise Con- Display Units Of Measure In: trol (ACC)” in “Understanding The Features Of Your The EVIC, odometer, and Uconnect™ gps (if equipped) Vehicle.” can be changed between English and Metric units of measure.
Page 333: Media Center 730N/430/430N
UNDERSTANDING YOUR INSTRUMENT PANEL 331 MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ MEDIA CENTER 130 (SALES CODE RES) RHB) CD/DVD/HDD/NAV — IF EQUIPPED NOTE: The radio sales code is located on the lower right NOTE: The sales code is located on the lower right side side of the radio faceplate.
Page 334: Operating Instructions - Radio Mode
332 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Radio Mode to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection.
Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL knob to save time change. control knob to the right or left to increase or decrease the mid-range tones.
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to SET 2 in both AM and FM. This allows a total of 12 AM exit setting tone, balance, and fade. and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by AM/FM Button pressing the pushbutton twice.
Page 337: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 335 Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 338 336 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button - Ejecting a CD the current selection. Pressing and holding the SEEK Press the EJECT button to eject the CD. button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within...
Page 339: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 337 SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Press this button while the CD is playing to activate The medium formats supported by the radio are ISO 9660 Random Play. This feature plays the selections on the Level 1 and Level 2 and includes the Joliet extension.
Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL exceeding 20 folders will result in this display. With Supported MP3 File Formats 200 files, exceeding 50 folders will result in this The radio will recognize only files with the *.MP3 exten- display.) sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems.
Page 341 UNDERSTANDING YOUR INSTRUMENT PANEL 339 Loading times for playback of MP3 files may be affected MPEG Sampling Fre- Bit Rate (kbps) by the following: Specification quency (kHz) • Media - CD-RW media may take longer to load than 160, 128, 144, MPEG-2 Audio 112, 96, 80, 64, CD-R media...
Page 342: Operation Instructions - Auxiliary Mode
340 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Auxiliary Mode MEDIA CENTER 130 WITH SATELLITE RADIO The auxiliary (AUX) jack is an audio input jack, which (SALES CODE RES+RSC) allows the user to plug in a portable device, such as an NOTE: The radio sales code is located on the lower right MP3 player, or cassette player, and utilize the vehicle’s side of the radio faceplate.
Page 343: Operating Instructions - Radio Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 341 Operating Instructions — Radio Mode to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON/RUN or another selection.
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button Uconnect™ Phone — If Equipped 3. After adjusting the hours, press the right side TUNE/ Press this button to operate the Uconnect™ Phone feature SCROLL control knob to set the minutes. The minutes (if equipped).
Page 345 UNDERSTANDING YOUR INSTRUMENT PANEL 343 INFO Button Push the rotary TUNE/SCROLL control knob a second Press the INFO button for an RDS station (one with call time and MID will display. Turn the TUNE/SCROLL letters displayed). The radio will return a Radio Text control knob to the right or left to increase or decrease the message broadcast from an FM station (FM mode only).
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to 16-Digit Character Program Type exit setting tone, balance, and fade. Display Classic Rock Cls Rock MUSIC TYPE Button College College Pressing this button once will turn on the Music Type mode for five seconds.
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 SETUP Button 16-Digit Character Program Type Pressing the SETUP button allows you to select between Display the following items: Soft Soft • Set Clock — Pressing the SELECT button will allow Soft Rock Soft Rck you to set the clock.
Page 348: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
346 UNDERSTANDING YOUR INSTRUMENT PANEL window. Select the button (1–6) you wish to lock onto this Buttons 1 - 6 station and press and release that button. If a button is These buttons tune the radio to the stations that you not selected within five seconds after pressing the SET/ commit to pushbutton memory (12 AM and 12 FM RND button, the station will continue to play but will not...
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 Inserting Compact Disc(s) CAUTION! (Continued) Gently insert one CD into the CD player with the CD • Do not use adhesive labels. These labels can peel label facing up. The CD will automatically be pulled into away and jam the player mechanism.
Page 350: Notes On Playing Mp3 Files
348 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button SET/RND Button (Random Play Button) Press the right SEEK button for the next selection on the Press this button while the CD is playing to activate CD. Press the left SEEK button to return to the beginning Random Play.
Page 351 UNDERSTANDING YOUR INSTRUMENT PANEL 349 Supported Medium Formats (File Systems) exceeding 20 folders will result in this display. With The medium formats supported by the radio are ISO 9660 200 files, exceeding 50 folders will result in this Level 1 and Level 2 and includes the Joliet extension. display.) When reading discs recorded using formats other than •...
Page 352 350 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats MPEG Sampling Fre- Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification quency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 160, 128, 144, extension may cause playback problems.
Page 353: List Button (Cd Mode For Mp3 Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 351 Loading times for playback of MP3 files may be affected begin playing the files contained in that folder (or the by the following: next folder in sequence if the selection does not contain playable files). •...
Page 354: Uconnect™ Multimedia (Satellite Radio) - If Equipped
352 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Auxiliary Mode Uconnect™ Multimedia (Satellite Radio) — If The auxiliary (AUX) jack is an audio input jack which Equipped allows the user to plug in a portable device such as an Satellite radio uses direct satellite-to-receiver broadcast- MP3 player or cassette player and utilize the vehicle’s ing technology to provide clear digital sound, coast to audio system to amplify the source and play through the...
Page 355 UNDERSTANDING YOUR INSTRUMENT PANEL 353 information, call the toll-free number 888-539-7474, or Sirius ID number will display. The Sirius ID number visit the Sirius web site at www.sirius.com, or at display will time out in two minutes. Press any button on www.siriuscanada.ca for Canadian residents.
Page 356 354 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
Page 357 UNDERSTANDING YOUR INSTRUMENT PANEL 355 additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type RW/FF function is active, the radio will be tuned to the next...
Page 358: Operating Instructions (Uconnect™ Phone) - If Equipped
356 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory Every time a preset button is used, a corresponding When you are receiving a channel that you wish to button number will display. commit to pushbutton memory, press the SET button. Buttons 1 - 6 The symbol SET 1 will now show in the display window.
Page 359: Connecting The Ipod Or External Usb Device
UNDERSTANDING YOUR INSTRUMENT PANEL 357 This feature allows an iPod or external USB device to be Connecting The iPod Or External USB Device plugged into the USB port, located in the center console Use the connection cable to connect an iPod or external or glove compartment.
Page 360: Using This Feature
358 UNDERSTANDING YOUR INSTRUMENT PANEL • The audio device can be controlled using the radio Once the audio device is connected and synchronized to the vehicle’s iPod /USB/MP3 control system (iPod or buttons to Play, Browse, and List the iPod contents. external USB device may take a few minutes to connect), •...
Page 361 UNDERSTANDING YOUR INSTRUMENT PANEL 359 • A single press backward << RW or forward FF >> will mode. In Play mode, the following buttons on the radio faceplate may be used to control the iPod or external jump backward or forward respectively, for five USB device and display data: seconds.
Page 362: List Or Browse Mode
360 UNDERSTANDING YOUR INSTRUMENT PANEL • Press the SCAN button to use iPod /USB/MP3 de- List Or Browse Mode vice scan mode, which will play the first 10 seconds of During Play mode, pressing any of the buttons described each track in the current list and then forward to the below, will bring up List mode.
Page 363 UNDERSTANDING YOUR INSTRUMENT PANEL 361 • During all List modes, the iPod displays all lists in • Pressing a PRESET button will display the current “wrap-around” mode. So if the track is at the list on the top line and the first item in that list on bottom of the list, just turn the wheel backward the second line.
Page 364: Bluetooth Streaming Audio (Btsa)
362 UNDERSTANDING YOUR INSTRUMENT PANEL Bluetooth Streaming Audio (BTSA) CAUTION! Music can be streamed from your cellular phone to the • Leaving the iPod or external USB device (or any Uconnect™ phone system. supported device) anywhere in the vehicle in Controlling BTSA Using Radio Buttons extreme heat or cold can alter the operation or To get into the BTSA mode, press either “AUX”...
Page 365 UNDERSTANDING YOUR INSTRUMENT PANEL 363 Selecting Different Audio Device Previous Track Use the SEEK DOWN button, or press the VR button on 1. Press PHONE button to begin. the radio and say “Previous Track” to jump to the 2. After the Ready prompt and the following beep, say previous track music on your cellular phone.
Page 366: Uconnect™ Multimedia Video Entertainment
364 UNDERSTANDING YOUR INSTRUMENT PANEL UCONNECT™ MULTIMEDIA VIDEO ENTERTAINMENT SYSTEM (VES)™ — IF EQUIPPED Getting Started • Screen located in the overhead console : Unfold the overhead LCD screen by pushing the button on the overhead console behind the screen. Overhead Video Screen •...
Page 367: Single Video Screen
UNDERSTANDING YOUR INSTRUMENT PANEL 365 Single Video Screen 2. Insert the DVD with the label facing up. The radio automatically selects the appropriate mode after the disc NOTE: Typically there are two different ways to operate is recognized and displays the menu screen or starts the features of the Video Entertainment System (VES)™.
Page 368 366 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Remote Control 1. Press the MODE button on the Remote Control. 2. While looking at the video screen, highlight DISC by either pressing Up/Down/Left/Right buttons or by re- peatedly pressing the MODE button, then press ENTER on the Remote Control.
Page 369 UNDERSTANDING YOUR INSTRUMENT PANEL 367 Using The Touch-Screen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list appears on the right side of the screen, touch the HIDE LIST soft-key to display the Rear VES Controls screen.
Page 370 368 UNDERSTANDING YOUR INSTRUMENT PANEL channel you want to change, select the new mode from NOTE: • To view a DVD on the radio press the RADIO/MEDIA the available list on the right. Modes that are unavailable are greyed-out. hard-key, on the radio faceplate, then touch the DISC tab soft-key and then the VIEW VIDEO soft-key.
Page 371: Play Video Games
UNDERSTANDING YOUR INSTRUMENT PANEL 369 Play Video Games When connecting an external source to the AUX input, be Connect the video game console to the Auxiliary RCA sure to follow the standard color coding for the VES™ input jacks located on the back of the center console. jacks: NOTE: Certain high-end video games, such as Playsta- tion3 and XBox360 will exceed the power limit of the...
Page 372 370 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Remote Control 1. Press the MODE button on the Remote Control. 2. While looking at the video screen, highlight VES AUX 1, by either pressing Up/Down/Left/Right buttons or by repeatedly pressing the MODE button, then press ENTER on the Remote Control.
Page 373 UNDERSTANDING YOUR INSTRUMENT PANEL 371 Using The Touch-Screen Radio Controls 3. Touch the 1 or 2 based on the headphone channel you want to change. To exit press the back arrow soft-key at 1. Press the MENU hard-key on the radio faceplate. the top of the screen.
Page 374: Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1
372 UNDERSTANDING YOUR INSTRUMENT PANEL Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1 Ensure the Remote Control and Headphone switch is on Channel 2. Using The Remote Control 1. Press the MODE button on the Remote Control and the Mode Select Screen will display, unless a video is playing then only a small banner will appear on the bottom of the screen.
Page 375 UNDERSTANDING YOUR INSTRUMENT PANEL 373 Using The Touch-Screen Radio Controls 3. To listen to an audio source on Channel 2 while a video is playing on Channel 1, touch the 2 soft-key and 1. Press the MENU hard-key on the radio faceplate. choose an audio source.
Page 376: Important Notes For Single Video Screen System
374 UNDERSTANDING YOUR INSTRUMENT PANEL Important Notes For Single Video Screen System Play A DVD Using The Touch-Screen Radio • VES™ is able to transmit two channels of stereo audio 1. Press the OPEN/CLOSE or LOAD hard-key on the simultaneously. radio faceplate (Touch-Screen).
Page 377 UNDERSTANDING YOUR INSTRUMENT PANEL 375 Using The Touch-Screen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES Controls screen.
Page 378: Remote Control
376 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Touch the 1 or 2 soft-key based on the channel you Remote Control want to change and then the DISC soft-key in the MEDIA column. To exit touch the back arrow at the top left of the screen.
Page 379 UNDERSTANDING YOUR INSTRUMENT PANEL 377 2. Channel Selector Indicators – When a button is / Prev – In radio modes, press to select to the pressed, the currently affected channel or channel button previous station. In disc modes, press to advance to the is illuminated momentarily.
Page 380 378 UNDERSTANDING YOUR INSTRUMENT PANEL disc in a radio with a multiple-disc changer, PROG Up and the disc is stopped, press the SETUP button to access selects the next disc and PROG Down selects the previ- the DVD Setup menu. (see the DVD Setup Menu of this ous disc.
Page 381: Remote Control Storage
UNDERSTANDING YOUR INSTRUMENT PANEL 379 Remote Control Storage The video screen(s) come with a built in storage compart- ment for the remote control which is accessible when the screen is opened. To remove the remote, use your index finger to pull and rotate the remote towards you. Do not try to pull the remote straight down as it will be very difficult to remove.
Page 382: Replacing The Batteries
380 UNDERSTANDING YOUR INSTRUMENT PANEL vehicle is not equipped with a DVD player, follow the Headphones Operation radio’s instructions to turn Video Lock on. The radio The headphones receive two separate channels of audio and the video screen(s) indicate when Video Lock is using an infrared transmitter from the video screen.
Page 383: Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 381 NOTE: The rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video system is turned off.
Page 384: Replacing The Batteries
382 UNDERSTANDING YOUR INSTRUMENT PANEL 3. If the video screen is displaying a video source (such Replacing The Batteries as a DVD Video), pressing STATUS shows the status on a Each set of headphones requires two AAA batteries for popup banner at the bottom of the screen. Pressing the operation.
Page 385 UNDERSTANDING YOUR INSTRUMENT PANEL 383 How Long Does The Coverage Last? This warranty lasts NATURE WHATSOEVER. Some states and jurisdictions as long as you own the Product. may not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not What Does This Warranty Cover? Except as specified apply to you.
Page 386: System Information
384 UNDERSTANDING YOUR INSTRUMENT PANEL If you have any questions or comments regarding your If the radio functions (FM, AM, or SAT) are in the shared Unwired wireless headphones, please phone 1-888-293- mode with the VES™, only the radio is able to control the 3332 or email customersupport@unwiredtechnology.com.
Page 387 UNDERSTANDING YOUR INSTRUMENT PANEL 385 The VES™ can even control radio modes or video modes Information Mode Display while the radio is turned off. The VES™ can access the radio modes or disc modes by navigating to those modes on the VES™ and activating a radio mode or disc mode. Information Mode Video Screen Display 1.
Page 388 386 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Channel 2 Shared Status Numeric Keypad Menu 6. Channel 2 Audio Only/Mute 7. Channel 1 ENTER Button Action 8. Channel 2 ENTER Button Action 9. Clock 10. Video Lock 11. Not Available / Error 12.
Page 389 UNDERSTANDING YOUR INSTRUMENT PANEL 387 screen makes it easy to enter a specific tuner frequency, Station List Menu satellite channel, or track number. To enter the desired digit: 1. Press the remote control’s navigation buttons ( , ) to navigate to the desired digit. 2.
Page 390 388 UNDERSTANDING YOUR INSTRUMENT PANEL Disc Menu Display Settings Disc Menu For CDs Video Screen Display Settings When listening to a CD Audio or CD Data disc, pressing When watching a video source (DVD Video with the disc the remote control’s MENU button displays a list of all in Play mode, Aux Video, SIRIUS Backseat TV™, etc.), commands which control playback of the disc.
Page 391 UNDERSTANDING YOUR INSTRUMENT PANEL 389 • Close the video screen. settings are already set for optimum viewing, so there is no need to change these settings under normal circum- • To change the current audio mode, press the remote stances. control’s MODE button.
Page 392 390 UNDERSTANDING YOUR INSTRUMENT PANEL Disc Formats DVD Audio Support The VES™ DVD player is capable of playing the follow- When a DVD-Audio disc is inserted in the VES™ DVD ing types of discs (12 mm or 8 mm diameter): player, the DVD-Audio title on the disc is played by •...
Page 393 UNDERSTANDING YOUR INSTRUMENT PANEL 391 • Mixed media recordable DVD formats will only play If you record a disc using a personal computer, there may be cases where the VES™ DVD player may not be able to the Video_TS portion of the disc. play some or the entire disc, even if it is recorded in a If you are still having trouble writing a disc that is compatible format and is playable on other players.
Page 394 392 UNDERSTANDING YOUR INSTRUMENT PANEL end with the extension .mp3 or .MP3 and WMA between 64 and 192Kbps. Variable bit rates are also files must always end with the extension .wma or supported. For both formats, the recommended .WMA . To prevent incorrect playback, do not use sample rate is either 44.1kHz or 48kHz.
Page 395 UNDERSTANDING YOUR INSTRUMENT PANEL 393 player will attempt to continue playing the disc by Display skipping forward 1.0 to 3.0 seconds at a time. If the end Other Language Setup of the disc is reached, the DVD player will return to the beginning of the disc and attempt to play the start of the first track.
Page 396 394 UNDERSTANDING YOUR INSTRUMENT PANEL • When the entire four-digit code is entered, press the All of the Language settings have a special Other setting to accommodate languages other than Japanese or Eng- remote control’s ENTER button. If the language code lish.
Page 397 UNDERSTANDING YOUR INSTRUMENT PANEL 395 them where lower numbers are designated for all audi- ences and higher numbers are designated for more adult audiences. When a DVD-Video disc is loaded, its rating is compared to the setting in the DVD player. If the rating of the disc is higher than the setting in the player, a Password screen is displayed.
Page 398 396 UNDERSTANDING YOUR INSTRUMENT PANEL • After the four-digit password is entered, press the To set the password, activate the DVD Setup Menu and follow these additional instructions: remote control’s ENTER button to accept the change. • Using the remote control Left and Right cursor but- tons, select the Rating tab.
Page 399 UNDERSTANDING YOUR INSTRUMENT PANEL 397 • Using the remote control’s Up and Down cursor To set the rating, activate the DVD Setup Menu and follow these additional instructions: buttons, select the new rating level, and then press the remote control’s ENTER button to accept the change. •...
Page 400: Steering Wheel Audio Controls
398 UNDERSTANDING YOUR INSTRUMENT PANEL General Information This system complies with Part 15 of the FCC Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Page 401: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 399 Pressing the center button will make the radio switch CD Player between the various modes available (AM/FM/SAT/ Pressing the top of the switch once will go to the next CD/HDD/AUX/VES, etc.). track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track, or to the The left-hand control is a rocker-type switch with a beginning of the previous track if it is within one second...
Page 402: Cd/Dvd Disc Maintenance
400 UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD DISC MAINTENANCE NOTE: If you experience difficulty in playing a particu- To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding.
Page 403: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 401 CLIMATE CONTROLS The Dual-Zone Manual Climate Controls allow both The air conditioning and heating system is designed to driver and front passenger seat occupants to select indi- make you comfortable in all types of weather. vidual comfort settings.
Page 404 402 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Controls cooler temperatures, while rotating right into the red area indicates warmer temperatures. • Driver Temperature Control Rotate this control to regulate the tem- NOTE: If your air conditioning performance seems perature of the air inside the passenger lower than expected, check the front of the A/C con- compartment for the left front seat denser located in front of the radiator for an accumula-...
Page 405 UNDERSTANDING YOUR INSTRUMENT PANEL 403 NOTE: The center instrument panel outlets can be aimed so that they are directed toward the rear seat Air is directed through the floor, defrost, and side passengers for maximum airflow to the rear. window demist outlets. This setting works best in cold or snowy conditions that require extra heat to Bi-Level the windshield.
Page 406 404 UNDERSTANDING YOUR INSTRUMENT PANEL • The A/C will engage automatically to prevent fogging Conditioning (A/C) button is not pressed. This dehu- midifies the air to help dry the windshield. To improve when the recirculation button is pressed and the mode fuel economy, use these modes only when necessary.
Page 407: Dual-Zone Automatic Temperature Control (Atc) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 405 NOTE: The air conditioning compressor will not engage Dual-Zone Automatic Temperature Control (ATC) until the engine has been running for about 10 seconds. — If Equipped • MAX A/C • The Automatic Temperature Control (ATC) allows For maximum cooling use the A/C and recirculation both driver and front passenger seat occupants to buttons at the same time.
Page 408 406 UNDERSTANDING YOUR INSTRUMENT PANEL The ATC system automatically maintains the interior 1. A/C Button comfort level desired by the driver and passenger. Press and release to change the current Air Conditioning (A/C) setting, the indicator illuminates when A/C is ON. Performing this function will cause the ATC to switch into manual mode.
Page 409 UNDERSTANDING YOUR INSTRUMENT PANEL 407 6. Right Front Seat Occupant Temperature Display 10. Auto Temperature Control Button This display shows the temperature setting for the right Controls airflow temperature, distribution, volume, and front seat occupant. the amount of air recirculation automatically. Press and release to select.
Page 410 408 UNDERSTANDING YOUR INSTRUMENT PANEL 13. Mode Control Button 2. Next, adjust the temperature you would like the Press and release to select between Modes (Panel, Bi- system to maintain by adjusting the driver and front Level, Floor, Mix). Performing this function will cause the passenger temperature control buttons.
Page 411 UNDERSTANDING YOUR INSTRUMENT PANEL 409 To provide you with maximum comfort in the Automatic the control clockwise and decreases when you move the mode, during cold start-ups the blower fan will remain control counter-clockwise. on low until the engine warms up. The blower will The blower fan speed can be set to any fixed speed by increase in speed and transition into Auto mode.
Page 412 410 UNDERSTANDING YOUR INSTRUMENT PANEL Bi-Level Mode Defrost Mode Air comes from the instrument panel outlets, floor Air comes from the windshield and side window outlets and defrost outlets. demist outlets. Use Defrost mode with maximum temperature settings for best windshield and side win- NOTE: In many temperature positions, the BI-LEVEL dow defrosting.
Page 413: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 411 outlets. If Economy mode is desired, press the A/C selected. Push the button a second time to turn off the button to turn off the A/C mode in the ATC display and Recirculation mode LED and allow outside air into the deactivate the A/C system.
Page 414 412 UNDERSTANDING YOUR INSTRUMENT PANEL As the temperature gets colder, it may be necessary to Your air conditioning system is also equipped with an direct air onto the windshield. Adjust the temperature automatic recirculation system. When the system senses control and blower speed to maintain comfort. Higher a heavy load or high heat conditions, it may use partial blower speeds will reduce fogging.
Page 415: Operating Tips Chart
UNDERSTANDING YOUR INSTRUMENT PANEL 413 Operating Tips Chart...
Page 417: Starting And Operating
STARTING AND OPERATING CONTENTS Starting Procedures ....421 Automatic Transmission ....428 Automatic Transmission .
Page 418 416 STARTING AND OPERATING Four-Wheel Drive Operation ... . . 449 Electronic Vehicle Information Center (EVIC) Display Messages ....460 Quadra-Trac I Operating Instructions/ Precautions –...
Page 419 STARTING AND OPERATING 417 Power Steering ..... . . 468 Trailer Sway Control (TSC) ... . . 480 3.6L Engine .
Page 420 418 STARTING AND OPERATING Tires — General Information ... . . 497 Replacement Tires ....505 Tire Pressure .
Page 421 STARTING AND OPERATING 419 E-85 Usage In Non-Flex Fuel Vehicles ..520 Replacement Parts ....527 MMT In Gasoline ....521 Maintenance .
Page 422 420 STARTING AND OPERATING Towing Tips ......546 Recreational Towing – Quadra-Trac I (Single-Speed Transfer Case) Four-Wheel Snow Plow .
Page 423: Starting Procedures
STARTING AND OPERATING 421 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the • Children should be warned not to touch the park- inside and outside mirrors, fasten your seat belt, and if ing brake, brake pedal or the shift lever. Do not present, instruct all other occupants to buckle their seat leave the key fob in or near the vehicle, and do not belts.
Page 424: Keyless Enter-N-Go
422 STARTING AND OPERATING Do not press the accelerator. Use the Fob with Integrated CAUTION! Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The Damage to the transmission may occur if the follow- starter motor will continue to run, and it will disengage ing precautions are not observed: •...
Page 425: Normal Starting
STARTING AND OPERATING 423 Installing And Removing The ENGINE NOTE: The ENGINE START/STOP button should only START/STOP Button be removed or inserted with the ignition in the LOCK position (OFF position for Keyless Enter-N-Go). Installing The Button Normal Starting 1. Remove the key fob from the ignition switch. Using The ENGINE START/STOP Button 2.
Page 426 424 STARTING AND OPERATING To Turn Off The Engine Using ENGINE NOTE: If the ignition switch is left in the ACC or RUN START/STOP Button (engine not running) position and the transmission is in PARK, the system will automatically time out after 1.
Page 427: Extreme Cold Weather (Below -20°F Or 29°C)
STARTING AND OPERATING 425 • Press the ENGINE START/STOP button a second time If Engine Fails To Start to change the ignition switch to the RUN position WARNING! (EVIC displays “IGNITION MODE RUN”), • Press the ENGINE START/STOP button a third time •...
Page 428 426 STARTING AND OPERATING and hold the brake pedal, push the accelerator pedal all WARNING! (Continued) the way to the floor and hold it, then press and release the • Do not attempt to push or tow your vehicle to get ENGINE START/STOP button once.
Page 429: After Starting
STARTING AND OPERATING 427 The engine block heater cord is located: CAUTION! • 3.6L Engine – coiled and strapped to the engine oil To prevent damage to the starter, wait 10 to 15 sec- dipstick tube. onds before trying again. •...
Page 430: Automatic Transmission
428 STARTING AND OPERATING AUTOMATIC TRANSMISSION WARNING! • Unintended movement of a vehicle could injure CAUTION! those in or near the vehicle. As with all vehicles, Damage to the transmission may occur if the follow- you should never exit a vehicle while the engine is ing precautions are not observed: running.
Page 431: Key Ignition Park Interlock
STARTING AND OPERATING 429 WARNING! (Continued) WARNING! (Continued) • It is dangerous to move the shift lever out of PARK • Children should be warned not to touch the park- or NEUTRAL if the engine speed is higher than ing brake, brake pedal or the shift lever. Do not idle speed.
Page 432: Brake/Transmission Shift Interlock System
430 STARTING AND OPERATING Brake/Transmission Shift Interlock System vehicle may be somewhat abrupt. This is a normal This vehicle is equipped with a Brake Transmission Shift condition, and precision shifts will develop within a few Interlock System (BTSI) that holds the shift lever in the hundred miles (kilometers).
Page 433: Gear Ranges
STARTING AND OPERATING 431 PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply the parking brake when leaving vehicle in this range.
Page 434 432 STARTING AND OPERATING WARNING! WARNING! (Continued) • It is dangerous to move the shift lever out of PARK • Never use the PARK position as a substitute for or NEUTRAL if the engine speed is higher than the parking brake. Always apply the parking idle speed.
Page 435 STARTING AND OPERATING 433 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Allowing children to be in a vehicle unattended is those in or near the vehicle. As with all vehicles, dangerous for a number of reasons. A child or you should never exit a vehicle while the engine is others could be seriously or fatally injured.
Page 436 434 STARTING AND OPERATING • Look at the shift lever position display and verify that CAUTION! it indicates the PARK position. • Before moving the shift lever out of PARK, you • With brake pedal released, verify that the shift lever must turn the ignition switch from the LOCK/OFF will not move out of PARK.
Page 437 STARTING AND OPERATING 435 DRIVE WARNING! This range should be used for most city and highway driving. It provides the smoothest upshifts and down- Do not coast in NEUTRAL and never turn off the shifts, and the best fuel economy. The transmission ignition to coast down a hill.
Page 438 436 STARTING AND OPERATING Transmission Limp Home Mode 3. Turn the ignition switch to the LOCK/OFF position. Transmission function is monitored electronically for 4. Wait approximately 10 seconds. abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home 5.
Page 439 STARTING AND OPERATING 437 lever is in the DRIVE position. For example, if you shift WARNING! the transmission into 3 (third gear), the transmission will never shift above third gear, but will shift down into Do not downshift for additional engine braking on a second and first gear normally.
Page 440: Six-Speed Automatic Transmission (5.7L Engine) - If Equipped
438 STARTING AND OPERATING Overdrive Operation The electronically-controlled transmission provides a The automatic transmission includes an electronically precise shift schedule. The transmission electronics are controlled Overdrive (fifth gear). The transmission will self-calibrating; therefore, the first few shifts on a new automatically shift into the Overdrive gear if the follow- vehicle may be somewhat abrupt.
Page 441: Gear Ranges
STARTING AND OPERATING 439 PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply the parking brake when leaving vehicle in this range.
Page 442 440 STARTING AND OPERATING WARNING! WARNING! (Continued) • It is dangerous to move the shift lever out of PARK • Never use the PARK position as a substitute for or NEUTRAL if the engine speed is higher than the parking brake. Always apply the parking idle speed.
Page 443 STARTING AND OPERATING 441 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with those in or near the vehicle. As with all vehicles, access to an unlocked vehicle. Allowing children you should never exit a vehicle while the engine is to be in a vehicle unattended is dangerous for a running.
Page 444 442 STARTING AND OPERATING • Look at the shift lever position display and verify that CAUTION! it indicates the PARK position. • Before moving the shift lever out of PARK, you • With brake pedal released, verify that the shift lever must turn the ignition switch from the LOCK/OFF will not move out of PARK.
Page 445 STARTING AND OPERATING 443 DRIVE WARNING! This range should be used for most city and highway driving. It provides the smoothest upshifts and down- Do not coast in NEUTRAL and never turn off the shifts, and the best fuel economy. The transmission ignition to coast down a hill.
Page 446 444 STARTING AND OPERATING these conditions, using a lower gear range will improve Downshifting the transmission to the lowest possible performance and extend transmission life by reducing gear (when climbing a grade), or shifting to NEUTRAL excessive shifting and heat buildup. (when stopped in heavy traffic) can help to reduce this excess heat generation.
Page 447 STARTING AND OPERATING 445 Transmission Limp Home Mode 5. Restart the engine. Transmission function is monitored electronically for 6. Shift into the desired gear range. If the problem is no abnormal conditions. If a condition is detected that could longer detected, the transmission will return to normal result in transmission damage, Transmission Limp Home operation.
Page 448 446 STARTING AND OPERATING Use of ERS (or TOW/HAUL mode) also enables an To exit ERS mode, simply press and hold the shift lever to additional underdrive gear which is not normally used the right (+) until “D” is once again displayed in the shift during through-gear accelerations.
Page 449 STARTING AND OPERATING 447 Overdrive Operation HAUL mode. This will improve performance and reduce The automatic transmission includes an electronically the potential for transmission overheating or failure due controlled Overdrive (fourth and fifth gears). The trans- to excessive shifting. When operating in TOW/HAUL mission will automatically shift into the Overdrive gear if mode, transmission upshifts are delayed, and the trans- the following conditions are present:...
Page 450 448 STARTING AND OPERATING The “TOW/HAUL Indicator Light” will illuminate in the warm [usually after 1 to 3 miles (1.6 to 4.8 km) of instrument cluster to indicate that TOW/HAUL mode driving]. Because top gear is disabled, and engine has been activated. Pressing the switch a second time speed is higher when the torque converter clutch is not restores normal operation.
Page 451: Four-Wheel Drive Operation
STARTING AND OPERATING 449 FOUR-WHEEL DRIVE OPERATION Quadra-Trac II Operating Instructions/ Precautions – If Equipped Quadra-Trac I Operating Instructions/ The Quadra-Trac II transfer case is fully automatic in the Precautions – If Equipped normal driving 4WD AUTO mode. The Quadra-Trac II The Quadra-Trac I is a single-speed (HI range only) transfer case provides three mode positions: transfer case, which provides convenient full-time four-...
Page 452 450 STARTING AND OPERATING When operating your vehicle in 4WD LOW, the engine WARNING! speed is approximately three times that of the 4WD HI position at a given road speed. Take care not to overspeed You or others could be injured if you leave the the engine and do not exceed 25 mph (40 km/h).
Page 453: Shift Positions
STARTING AND OPERATING 451 Shift Positions 4WD LOW This range is for low speed four-wheel drive. It locks the For additional information on the appropriate use of each front and rear driveshafts together and forces the front transfer case mode position, see the information below: and rear wheels to rotate at the same speed.
Page 454: Shifting Procedures
452 STARTING AND OPERATING Shifting Procedures 4WD HI To 4WD LOW With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the ignition switch in the ON position or the engine running, shift the transmission into NEUTRAL, and press the “4WD LOW”...
Page 455 STARTING AND OPERATING 453 “Electronic Vehicle Information Center (EVIC)” in “Un- “Electronic Vehicle Information Center (EVIC)” in derstanding Your Instrument Panel” for further informa- “Understanding Your Instrument Panel” for further tion. information. • Shifting into or out of 4WD LOW is possible with the 4WD LOW To 4WD HI With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the vehicle completely stopped;...
Page 456: Quadra-Drive Ii System - If Equipped
454 STARTING AND OPERATING 4. Hold down the NEUTRAL “pin” switch (with a pen, NOTE: If shift conditions/interlocks are not met, a “To etc.) for four seconds until the LED light by the switch Tow Vehicle Safely, Read Neutral Shift Procedure in starts to blink indicating shift in progress.
Page 457: Selec-Terrain™ - If Equipped
STARTING AND OPERATING 455 case and axle coupling differ in design, their operation is similar. Follow the Quadra-Trac II transfer case shifting information, preceding this section, for shifting this system. SELEC-TERRAIN™ — IF EQUIPPED Description Selec-Terrain™ combines the capabilities of the vehicle control systems, along with driver input, to provide the best performance for all terrains.
Page 458 456 STARTING AND OPERATING to allow more driver control of vehicle while maintain- traction with seamless steering feel to provide im- ing safe handling controls. The vehicle will lower (if proved handling and acceleration over two-wheel equipped with Air Suspension) to Aero Mode in High drive vehicles.
Page 459: Electronic Vehicle Information Center (Evic) Display Messages
STARTING AND OPERATING 457 equipped with air suspension, the vehicle level will change to Off-Road 2. If the Selec-Terrain™ switch is in ROCK mode, and the transfer case is switched from 4WD Low to 4WD High, the Selec-Terrain™ system will return to AUTO. Electronic Vehicle Information Center (EVIC) Display Messages When the appropriate conditions exist, a message will...
Page 460 458 STARTING AND OPERATING • Normal Ride Height (NRH) – This is the standard required. To enter OR2, press the “Up” button twice position of the suspension and is meant for normal from the NRH position or once from the OR1 position driving.
Page 461 STARTING AND OPERATING 459 Selec-Terrain™ knob is turned to the “SPORT” posi- The Selec-Terrain™ switch will automatically change the tion. Turning the Selec-Terrain™ knob to the “AUTO” vehicle to the proper height based on the position of the position will return the system to normal operation. Selec-Terrain™...
Page 462: Electronic Vehicle Information Center (Evic) Display Messages
460 STARTING AND OPERATING After the engine is turned off, it may be noticed that the WARNING! air suspension system operates briefly, this is normal. The system is correcting the position of the vehicle to ensure The air suspension system uses a high pressure a proper appearance.
Page 463 STARTING AND OPERATING 461 lamps will show a position which the system is working closed, speed below threshold, etc). The “DOWN” button to achieve. When raising, if multiple indicator lamps are can be pressed multiple times. Each press will lower the flashing on the “Up”...
Page 464: On-Road Driving Tips
462 STARTING AND OPERATING requested while vehicle speed is between 15 mph wide variety of off-road applications. Specific design (24 km/h) and 25 mph (40 km/h), indicator lamp 4 characteristics give them a higher center of gravity than will remain on solid and indicator lamp 3 will flash as ordinary cars.
Page 465: Quadra-Lift™ - If Equipped
STARTING AND OPERATING 463 or terrain be selected. The vehicle height should then be raised as required by the changes in terrain. The Selec-Terrain™ switch will automatically change the vehicle to the optimized height based on the Selec- Terrain™ switch position. The vehicle height can be changed from the default height for each Selec-Terrain™...
Page 466: Driving Through Water
464 STARTING AND OPERATING CAUTION! CAUTION! Do not use 4WD LOW range when operating the When driving through water, do not exceed 5 mph vehicle on dry pavement. Driveline hardware dam- (8 km/h). Always check water depth before entering, age can result. as a precaution, and check all fluids afterward.
Page 467: Driving In Snow, Mud And Sand
STARTING AND OPERATING 465 and/or the flow rate is reduced. If you must cross Driving In Snow, Mud And Sand flowing water avoid depths in excess of 9 inches (23 cm). In heavy snow, when pulling a load, or for additional The flowing water can erode the streambed, causing your control at slower speeds, shift the transmission to a low vehicle to sink into deeper water.
Page 468 466 STARTING AND OPERATING Before climbing a steep hill, shift the transmission to a WARNING! lower gear and shift the transfer case to 4WD LOW. Use first gear and 4WD LOW for very steep hills. If the engine stalls, you lose forward motion, or cannot make it to the top of a steep hill or grade, If you stall or begin to lose forward motion while never attempt to turn around.
Page 469: Traction Downhill
STARTING AND OPERATING 467 • Completely inspect the underbody of your vehicle. Traction Downhill Shift the transmission into a low gear, and the transfer Check tires, body structure, steering, suspension, and case into 4WD LOW range. Let the vehicle go slowly exhaust system for damage.
Page 470: Power Steering
468 STARTING AND OPERATING and increased ease of maneuverability in tight spaces. WARNING! The system will vary its assist to provide light efforts while parking and good feel while driving. If the electro- Abrasive material in any part of the brakes may cause hydraulic power steering system experiences a fault that excessive wear or unpredictable braking.
Page 471: L Engine
STARTING AND OPERATING 469 to “Electronic Vehicle Information Center (EVIC)” in NOTE: • Even if power steering assistance is no longer opera- “Understanding Your Instrument Panel” for further in- formation. tional, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in If the “POWER STEERING SYSTEM OVER TEMP”...
Page 472: Power Steering Fluid Check
470 STARTING AND OPERATING NOTE: CAUTION! • Increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that Prolonged operation of the steering system at the end there is a problem with the power steering system. of the steering wheel travel will increase the steering fluid temperature and it should be avoided when •...
Page 473: Multi-Displacement System (Mds) (If Equipped) - 5.7L Engine Only
STARTING AND OPERATING 471 surfaces. Refer to “Fluids, Lubricants, and Genuine CAUTION! Parts” in “Maintaining Your Vehicle” for further information. Do not use chemical flushes in your power steering system as the chemicals can damage your power MULTI-DISPLACEMENT SYSTEM (MDS) (IF steering components.
Page 474 472 STARTING AND OPERATING park brake, firmly push the park brake pedal fully. To When the parking brake is applied with the ignition release the parking brake, press the park brake pedal a switch in the ON position, the “Brake Warning Light” in second time and let your foot up as you feel the brake the instrument cluster will illuminate.
Page 475 STARTING AND OPERATING 473 make it difficult to move the shift lever out of PARK. The WARNING! (Continued) parking brake should always be applied whenever the • Do not leave the key fob in or near the vehicle, and driver is not in the vehicle. do not leave Keyless Enter-N-Go in the ACC or ON/RUN mode.
Page 476: Electronic Brake Control System
474 STARTING AND OPERATING Also, your vehicle is equipped with Trailer Sway Control CAUTION! (TSC), Hill Start Assist (HSA), Brake Lock Differential (BLD), Ready Alert Braking, Rain Brake Support and, if it If the “Brake Warning Light” remains on with the has four-wheel drive with the MP 3023 two-speed trans- parking brake released, a brake system malfunction fer case, Hill Descent Control (HDC).
Page 477: Traction Control System (Tcs)
STARTING AND OPERATING 475 Differential (BLD), functions similar to a limited-slip WARNING! differential and controls the wheel spin across a driven axle. If one wheel on a driven axle is spinning faster than The ABS cannot prevent the natural laws of physics the other, the system will apply the brake of the spinning from acting on the vehicle, nor can it increase the wheel.
Page 478: Electronic Roll Mitigation (Erm)
476 STARTING AND OPERATING benefit of the system, you must apply continuous brak- Electronic Roll Mitigation (ERM) ing pressure during the stopping sequence (do not This system anticipates the potential for wheel lift by “pump” the brakes). Do not reduce brake pedal pressure monitoring the driver’s steering wheel input and the unless braking is no longer desired.
Page 479: Electronic Stability Control (Esc)
STARTING AND OPERATING 477 counteracting the oversteer or understeer condition. En- WARNING! gine power may also be reduced to help the vehicle maintain the desired path. Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance ESC uses sensors in the vehicle to determine the vehicle that wheel lift or rollover may occur.
Page 480 478 STARTING AND OPERATING Light” also flashes when the TCS is active. If the “ESC The ESC system has two available operating modes in Activation/Malfunction Indicator Light” begins to flash 4WD HIGH range and two-wheel drive vehicles, and one during acceleration, ease up on the accelerator and apply operating mode in 4WD LOW range.
Page 481 STARTING AND OPERATING 479 the TCS section, has been disabled and the “ESC Off Indicator Light” will be illuminated. All other stability features of ESC function normally. This mode is intended to be used if the vehicle is in deep snow, sand, or gravel conditions and more wheel spin than ESC would nor- mally allow is required to gain traction.
Page 482: Trailer Sway Control (Tsc)
480 STARTING AND OPERATING Off” mode is overcome, turn ESC back on by momen- swaying trailer is recognized. No driver action is re- tarily pressing the “ESC OFF” switch. This may be done quired. Note that TSC cannot stop all trailers from while the vehicle is in motion.
Page 483: Hill Start Assist (Hsa)
STARTING AND OPERATING 481 • Gear selection matches vehicle uphill direction (i.e., Hill Start Assist (HSA) The HSA system is designed to assist the driver when vehicle facing uphill is in forward gear; vehicle back- starting a vehicle from a stop on a hill. HSA will maintain ing uphill is in REVERSE gear).
Page 484 482 STARTING AND OPERATING WARNING! WARNING! (Continued) • HSA is not a parking brake. If you stop the vehicle • If you use a trailer brake controller with your on a hill without putting the transmission in trailer, your trailer brakes may be activated and PARK and using the parking brake, it will roll deactivated with the brake switch.
Page 485: Ready Alert Braking - If Equipped
STARTING AND OPERATING 483 Ready Alert Braking – If Equipped Rain Brake Support – If Equipped Ready Alert Braking may reduce the time required to Rain Brake Support may improve braking performance reach full braking during emergency braking situations. in wet conditions. It will periodically apply a small It anticipates when an emergency braking situation may amount of brake pressure to remove any water buildup occur by monitoring how fast the throttle is released by...
Page 486: Hill Descent Control (Hdc) - Four-Wheel Drive Models With Mp3023 Two-Speed Transfer Case Only
484 STARTING AND OPERATING Hill Descent Control (HDC) — Four-Wheel Drive Models With MP3023 Two-Speed Transfer Case Only HDC maintains vehicle speed while descending hills during off-road driving situations and is available in 4WD LOW range only. To enable HDC, press the HDC switch or put the Selec-Terrain™...
Page 487 STARTING AND OPERATING 485 The HDC speed may be adjusted by the driver to suit the 4WD Low Range Set Speeds driving conditions. The speed corresponds to the trans- • 1st = 1 mph (1.6 km/h) mission gear selected. • 2nd = 2.5 mph (4 km/h) HDC operation can be overridden with brake application •...
Page 488: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
486 STARTING AND OPERATING speeds greater than 30 mph (48 km/h), see your autho- WARNING! rized dealer as soon as possible to have the problem diagnosed and corrected. HDC is only intended to assist the driver in control- ling vehicle speed when descending hills. The driver The “ESC Activation/Malfunction Indicator Light”...
Page 489: Tire Safety Information
STARTING AND OPERATING 487 • The ESC system will make buzzing or clicking sounds TIRE SAFETY INFORMATION when it is active. This is normal; the sounds will stop Tire Markings when ESC becomes inactive following the maneuver that caused the ESC activation. The “ESC OFF Indicator Light”...
Page 490 488 STARTING AND OPERATING • Temporary spare tires are spares designed for tempo- NOTE: • P (Passenger) - Metric tire sizing is based on U.S. rary emergency use only. Temporary high pressure design standards. P-Metric tires have the letter “P” compact spare tires have the letter “T”...
Page 491 STARTING AND OPERATING 489 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 492 490 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 493: Tire Identification Number (Tin)
STARTING AND OPERATING 491 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
Page 494: Tire Terminology And Definitions
492 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the Cold Tire Inflation Pressure vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 495: Tire Loading And Tire Pressure
STARTING AND OPERATING 493 Tire Loading And Tire Pressure Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
Page 496 494 STARTING AND OPERATING Loading The combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
Page 497 STARTING AND OPERATING 495 available cargo and luggage load capacity is 650 lbs NOTE: • The following table shows examples on how to calcu- (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). late total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations 5.
Page 498 496 STARTING AND OPERATING...
Page 499: Tires - General Information
STARTING AND OPERATING 497 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 500: Tire Inflation Pressures
498 STARTING AND OPERATING stability of the vehicle and can produce a feeling of WARNING! (Continued) sluggish response or over responsiveness in the steering. • Unequal tire pressures from one side of the ve- Unequal tire pressures can cause erratic and unpredict- hicle to the other can cause the vehicle to drift to able steering response.
Page 501: Tire Pressures For High Speed Operation
STARTING AND OPERATING 499 Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the winter.
Page 502: Radial-Ply Tires
500 STARTING AND OPERATING loading may be required for high-speed vehicle opera- Radial-Ply Tires tion. Refer to original equipment or an authorized tire WARNING! dealer for recommended safe operating speeds, loading and cold tire inflation pressures. Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle WARNING! poorly.
Page 503: Compact Spare Tire - If Equipped
STARTING AND OPERATING 501 vehicle. If your vehicle has this option refer to an Compact Spare Tire – If Equipped authorized tire dealer for the recommended tire rotation The compact spare is for temporary emergency use only. pattern. You can identify if your vehicle is equipped with a compact spare by looking at the spare tire description on If your vehicle is not equipped with an original equip- the Tire and Loading Information Placard located on the...
Page 504: Full Size Spare - If Equipped
502 STARTING AND OPERATING your original equipment tire, replace (or repair) the WARNING! original equipment tire and reinstall on the vehicle at the first opportunity. Compact spares are for temporary emergency use only. With these spares, do not drive more than Limited-Use Spare –...
Page 505: Tire Spinning
STARTING AND OPERATING 503 Tire Spinning WARNING! When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h). Limited-use spares are for emergency use only. In- stallation of this limited-use spare tire affects vehicle WARNING! handling.
Page 506: Tread Wear Indicators
504 STARTING AND OPERATING Tread Wear Indicators These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm).
Page 507: Replacement Tires
STARTING AND OPERATING 505 Information” placard for the size designation of your tire. WARNING! The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall. See the Tires and the spare tire should be replaced after six Tire Sizing Chart example found in the Tire Safety years, regardless of the remaining tread.
Page 508 506 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 509: Tire Chains (Traction Devices)
STARTING AND OPERATING 507 TIRE CHAINS (TRACTION DEVICES) CAUTION! Use of traction devices require sufficient tire-to-body clearance. Follow these recommendations to guard To avoid damage to your vehicle or tires, observe the against damage. following precautions: • Because of restricted traction device clearance be- •...
Page 510: Snow Tires
508 STARTING AND OPERATING Snow tires generally have lower speed ratings than what CAUTION! (Continued) was originally equipped with your vehicle and should • Do not drive for prolonged period on dry pave- not be operated at sustained speeds over 75 mph ment.
Page 511: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 509 These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on On/Off-Road type tires. Rotation will increase tread life, help to main- tain mud, snow, and wet traction levels, and contribute to a smooth, quiet ride.
Page 512 510 STARTING AND OPERATING the outside temperature decreases, the tire pressure will cold tire placard pressure. Once the low tire pressure decrease. Tire pressure should always be set based on warning has been illuminated, the tire pressure must be cold inflation tire pressure. This is defined as the tire increased to the recommended cold tire pressure in order pressure after the vehicle has not been driven for at least for the Tire Pressure Monitoring Telltale Light to be...
Page 513 STARTING AND OPERATING 511 Light will still be ON. In this situation, the Tire Pressure CAUTION! (Continued) Monitoring Telltale Light will turn OFF only after the • After inspecting or adjusting the tire pressure tires have been inflated to the vehicle’s recommended always reinstall the valve stem cap.
Page 514: Base System
512 STARTING AND OPERATING • The TPMS is not a substitute for proper tire mainte- The TPMS consists of the following components: nance, and it is the driver’s responsibility to maintain • Receiver Module correct tire pressure using an accurate tire gauge, even •...
Page 515 STARTING AND OPERATING 513 will automatically update and the Tire Pressure Monitor- 2. Installing some form of aftermarket window tinting ing Telltale Light will extinguish, once the updated tire that affects radio wave signals. pressures have been received. The vehicle may need to be 3.
Page 516: Premium System - If Equipped
514 STARTING AND OPERATING for 75 seconds and then remain on solid. In addition, a monitor tire pressure levels. Sensors, mounted to each “SERVICE TPM SYSTEM” message will be displayed for wheel as part of the valve stem, transmit tire pressure a minimum of five seconds.
Page 517 STARTING AND OPERATING 515 Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illuminate in the instrument cluster, and an au- dible chime will be activated, when one or more of the four active road tire pressures are low. In addition, the EVIC will display a “LOW TIRE PRESSURE”...
Page 518 516 STARTING AND OPERATING once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. SERVICE TPM SYSTEM Warning The Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds, and remain on solid when a system fault is detected.
Page 519 STARTING AND OPERATING 517 1. Jamming due to electronic devices or driving next to However, the system still needs to be serviced as long as facilities emitting the same Radio Frequencies as the TPM the SERVICE TPM SYSTEM message exists. sensors.
Page 520: General Information
518 STARTING AND OPERATING • This device must accept any interference received, a SERVICE TPM SYSTEM message for five seconds and then display dashes (- -) in place of the pressure value. including interference that may cause undesired Once you repair or replace the original road tire, and operation.
Page 521: L Engine
STARTING AND OPERATING 519 5.7L Engine Over 40 auto manufacturers worldwide have issued and This engine is designed to meet all emis- endorsed consistent gasoline specifications (the World- sions regulations and provide satisfactory wide Fuel Charter, WWFC) which define fuel properties fuel economy and performance when us- necessary to deliver enhanced emissions, performance, ing high-quality unleaded gasoline having...
Page 522: Gasoline/Oxygenate Blends
520 STARTING AND OPERATING Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-FFV vehicles are compatible with gasoline contain- genates such as Ethanol. Fuels blended with oxygenates ing 10% ethanol (E10). Gasoline with higher ethanol may be used in your vehicle.
Page 523: Mmt In Gasoline
STARTING AND OPERATING 521 To fix a Non-FFV vehicle inadvertently fueled once with vehicles. The manufacturer recommends that gasoline E-85 perform the following: without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump, •...
Page 524: Fuel System Cautions
522 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentra- performance: tions of methanol.
Page 525: Carbon Monoxide Warnings
STARTING AND OPERATING 523 Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- Follow the precautions below to prevent carbon mal conditions repaired promptly.
Page 526 524 STARTING AND OPERATING the other sections of this manual for information on CAUTION! features that are common between Flexible Fuel and gasoline-only powered vehicles. Only vehicles with the E-85 fuel filler door label can operate on E-85. E-85 Fuel Cap E-85 Badge...
Page 527: Ethanol Fuel (E-85)
STARTING AND OPERATING 525 Ethanol Fuel (E-85) When you do switch fuel types it is recommended that: E-85 is a mixture of approximately 85% fuel ethanol and • you do not switch when the fuel gauge indicates less 15% unleaded gasoline. than 1/4 full •...
Page 528: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
526 STARTING AND OPERATING • Some additives used in regular gasoline are not fully Starting compatible with E-85 and may form deposits in your The characteristics of E-85 fuel make it unsuitable for use engine. To eliminate driveability issues that may be when ambient temperatures fall below 0°F (-18°C).
Page 529: Replacement Parts
STARTING AND OPERATING 527 Replacement Parts Maintenance Many components in your Flexible Fuel Vehicle (FFV) are CAUTION! designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol com- Do not use ethanol mixture greater than 85% in your patible parts.
Page 530 528 STARTING AND OPERATING 1. Press the fuel filler door release switch (located under 2. Open the fuel filler door, and remove the fuel filler the headlamp switch). cap. Fuel Filler Door Release Switch Fuel Filler Cap...
Page 531 STARTING AND OPERATING 529 CAUTION! WARNING! • Damage to the fuel system or emission control • Never have any smoking materials lit in or near system could result from using an improper fuel the vehicle when the gas cap is removed or the cap (gas cap).
Page 532: Loose Fuel Filler Cap Message
530 STARTING AND OPERATING • Tighten the gas cap about one-quarter turn until you hear one click. This is an indication that the cap is properly tightened. • If the gas cap is not tighten properly, the MIL will come on. Be sure the gas cap is tightened every time the vehicle is refueled.
Page 533: Vehicle Loading
STARTING AND OPERATING 531 in “Understanding Your Instrument Panel” for further Gross Vehicle Weight Rating (GVWR) information. Tighten the fuel filler cap properly and press The GVWR is the total permissible weight of your vehicle the SELECT button to turn off the message. If the including driver, passengers, vehicle, options, trailer problem continues, the message will appear the next time tongue weight, and cargo.
Page 534 532 STARTING AND OPERATING springs, tires, or wheels). Heavier axles or suspension capacity conditions, and with no occupants or cargo components, sometimes specified by purchasers for in- loaded into the vehicle. The front and rear curb weight creased durability, does not necessarily increase the ve- values are determined by weighing your vehicle on a hicle’s GVWR.
Page 535: Trailer Towing
STARTING AND OPERATING 533 until the specified weight limitations are met. Store the TRAILER TOWING heavier items down low and be sure that the weight is In this section you will find safety tips and information distributed equally. Stow all loose items securely before on limits to the type of towing you can reasonably do driving.
Page 536 534 STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) WARNING! The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, cargo and trailer tongue If the gross trailer weight is 3,500 lbs (1 587 kg) or weight.
Page 537 STARTING AND OPERATING 535 rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica- Trailer Sway Control tion Label” in “Starting and Operating” for further The trailer sway control can be a mechanical telescoping information. link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable fric- WARNING! tion associated with the telescoping motion to dampen...
Page 538 536 STARTING AND OPERATING Weight-Distributing Hitch WARNING! A weight-distributing hitch system works by applying • An improperly adjusted weight-distributing hitch leverage through spring (load) bars. They are typically used for heavier loads, to distribute trailer tongue weight system may reduce handling, stability, and brak- to the tow vehicle’s front axle and the trailer axle(s).
Page 539 STARTING AND OPERATING 537 Without Weight-Distributing Hitch (Incorrect) With Weight-Distributing Hitch (Correct)
Page 540: Trailer Hitch Classification
538 STARTING AND OPERATING The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Refer to the Trailer Towing Weights (Maximum Trailer Weight Ratings) chart for the Max.
Page 541: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 539 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ Model GCWR (Gross Com- Frontal Area Max. GTW (Gross Max. Trailer Model bined Wt. Rating) Trailer Wt.) Tongue Wt.
Page 542: Trailer And Tongue Weight
540 STARTING AND OPERATING Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
Page 543: Towing Requirements
STARTING AND OPERATING 541 NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • Then, during the first 500 miles (805 km) that a factory-installed options, or authorized dealer-installed trailer is towed, do not drive over 50 mph options, must be considered as part of the total load on (80 km/h) and do not make starts at full throttle.
Page 544 542 STARTING AND OPERATING WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the hook retainers of the vehicle hitch.
Page 545 STARTING AND OPERATING 543 − Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General 2. GTW Information” in “Starting and Operating” for proper 3. GAWR inspection procedure. 4. Trailer tongue weight rating for the trailer hitch −...
Page 546 544 STARTING AND OPERATING − An electronically-actuated trailer brake controller is WARNING! required when towing a trailer with electronically- • Do not connect trailer brakes to your vehicle’s actuated brakes. When towing a trailer equipped with a hydraulic surge-actuated brake system, an electronic hydraulic brake lines.
Page 547 STARTING AND OPERATING 545 The Trailer Tow Package includes a seven–pin connector at the rear of the vehicle and a four-pin harness located under the rear bumper. The four-pin harness must be unclipped before use. Use a factory-approved trailer harness and connector. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector.
Page 548: Towing Tips
546 STARTING AND OPERATING Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Automatic Transmission The DRIVE range can be selected when towing. How- ever, if frequent shifting occurs while in this range, the TOW/HAUL mode (if equipped), or a lower gear range, should be selected.
Page 549: Snow Plow
STARTING AND OPERATING 547 of continuous operation. Refer to “Maintenance Sched- − Highway Driving ule” for the proper maintenance intervals. Reduce speed. NOTE: Check the transmission fluid level before towing − Air Conditioning (5.7L engine). Turn off temporarily. Electronic Speed Control – If Equipped SNOW PLOW Snow plows, winches, and other aftermarket equipment −...
Page 550: Recreational Towing (Behind Motorhome, Etc.)
548 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheel OFF the Two-Wheel Drive Four-Wheel Drive Models Ground Models See Instructions • Transmission in PARK Flat Tow NONE NOT ALLOWED • Transfer case in NEUTRAL (N) •...
Page 551: Recreational Towing - Two-Wheel Drive Models
STARTING AND OPERATING 549 Recreational Towing – Two-Wheel Drive Models 6. Install a suitable clamping device, designed for tow- DO NOT flat tow this vehicle. Damage to the drivetrain ing, to secure the front wheels in the straight position. will result. CAUTION! Recreational towing (for two-wheel drive models) is allowed ONLY if the rear wheels are OFF the ground.
Page 552: Recreational Towing - Quadra-Trac
550 STARTING AND OPERATING CAUTION! CAUTION! • Front or rear wheel lifts should not be used. Towing this vehicle in violation of the above require- ments can cause severe transmission and/or transfer Internal damage to the transmission or transfer case damage. Damage from improper towing is not case will occur if a front or rear wheel lift is used covered under the New Vehicle Limited Warranty.
Page 553 STARTING AND OPERATING 551 Shifting Into NEUTRAL (N) CAUTION! (Continued) • Failure to follow these procedures can cause se- WARNING! vere transmission and/or transfer case damage. You or others could be injured if you leave the Damage from improper towing is not covered vehicle unattended with the transfer case in the under the New Vehicle Limited Warranty.
Page 554 552 STARTING AND OPERATING 4. Turn the ignition switch to the ON/RUN position, but CAUTION! do not start the engine. It is necessary to follow these steps to be certain that 5. Press and hold the brake pedal. the transfer case is fully in NEUTRAL (N) before 6.
Page 555 STARTING AND OPERATING 553 11. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 12. Turn OFF the engine. 13. Firmly apply the parking brake. 14. Shift the transmission into PARK and remove the key fob.
Page 556 554 STARTING AND OPERATING NOTE: Shifting Out Of NEUTRAL (N) • Steps 1 through 6 are requirements that must be met Use the following procedure to prepare your vehicle for prior to pressing the NEUTRAL (N) button, and must normal usage. continue to be met until the four seconds elapse and 1.
Page 557 STARTING AND OPERATING 555 8. After the NEUTRAL (N) button has been released, the transfer case will shift to the position indicated by the selector switch. 9. Shift the transmission into PARK. 10. Release the brake pedal. 11. Disconnect vehicle from the tow vehicle. 12.
Page 558 556 STARTING AND OPERATING • The ignition switch must be in the ON/RUN position NOTE: • Steps 1 through 5 are requirements that must be met for a shift to take place and for the position indicator prior to pressing the NEUTRAL (N) button, and must lights to be operable.
Page 559: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....558 Preparations For Jump-Start ... . . 570 If Your Engine Overheats .
Page 560: Hazard Warning Flashers
558 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the switch bank just above the climate controls. potential for overheating by taking the appropriate ac- tion.
Page 561: Jacking And Tire Changing
WHAT TO DO IN EMERGENCIES 559 JACKING AND TIRE CHANGING CAUTION! WARNING! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads HOT • Do not attempt to change a tire on the side of the (H), pull over and stop the vehicle.
Page 562: Jack Location
560 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas.
Page 563: Preparations For Jacking
WHAT TO DO IN EMERGENCIES 561 Preparations For Jacking 6. Block both the front and rear of the wheel diagonally opposite of the jack- 1. Park the vehicle on a firm, level surface. Avoid ice or ing position. For example, if changing slippery surfaces.
Page 564: Jacking Instructions
562 WHAT TO DO IN EMERGENCIES Jacking Instructions WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a WARNING! jack. Carefully follow these tire changing warnings to • Do not get under the vehicle when it is on a jack. help prevent personal injury or damage to your •...
Page 565 WHAT TO DO IN EMERGENCIES 563 CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left, one turn, while the wheel is still on the ground.
Page 566 564 WHAT TO DO IN EMERGENCIES 4. For the front axle, place the jack on the body flange CAUTION! just behind the front tire as indicated by the triangular lift point symbol on the sill molding. Do not raise the Do not attempt to raise vehicle by jacking on loca- vehicle until you are sure the jack is fully engaged.
Page 567 WHAT TO DO IN EMERGENCIES 565 5. For a rear tire, place the jack in the slot on the rear tie-down bracket, just forward of the rear tire (as indi- cated by the triangular lift point symbol on the sill molding).
Page 568 566 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 7. Remove the lug nuts and wheel. 8.
Page 569 WHAT TO DO IN EMERGENCIES 567 9. Lower the vehicle by turning the jack screw counter- clockwise, and remove the jack and wheel blocks. 10. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage.
Page 570: Road Tire Installation
568 WHAT TO DO IN EMERGENCIES 12. Remove the small center cap and securely store the special wing nut torqued to 3.7 ft-lbs (5 N·m), reinstall the road wheel in the cargo area. jack and tool kit foam tray, and latch the rear load floor cover.
Page 571: Jump-Starting
WHAT TO DO IN EMERGENCIES 569 5. After 25 miles (40 km) check the lug nut torque with a WARNING! torque wrench to ensure that all lug nuts are properly seated against the wheel. To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle JUMP-STARTING has been lowered.
Page 572: Preparations For Jump-Start
570 WHAT TO DO IN EMERGENCIES CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. WARNING! Do not attempt jump-starting if the battery is frozen.
Page 573: Jump-Starting Procedure
WHAT TO DO IN EMERGENCIES 571 3. Remove the protective cover over the remote positive WARNING! (+) battery post. Pull upward on the cover to remove it. • Take care to avoid the radiator cooling fan when- 4. If using another vehicle to jump-start the battery, park ever the hood is raised.
Page 574 572 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Failure to follow these procedures could result in Do not connect the cable to the negative post (-) of the damage to the charging system of the booster vehicle discharged battery. The resulting electrical spark or the discharged vehicle.
Page 575: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 573 8. Disconnect the opposite end of the positive (+) jumper CAUTION! cable from the positive (+) post of the booster battery. Accessories that can be plugged into the vehicle 9. Disconnect the positive (+) end of the jumper cable power outlets draw power from the vehicle’s battery, from the remote positive (+) post of the discharged even when not in use (i.e., cellular phones, etc.).
Page 576 574 WHAT TO DO IN EMERGENCIES CAUTION! CAUTION! (Continued) • Revving the engine or spinning the wheels too fast Racing the engine or spinning the wheels may lead to may lead to transmission overheating and failure. transmission overheating and failure. Allow the en- It can also damage the tires.
Page 577: Emergency Tow Hooks - If Equipped
WHAT TO DO IN EMERGENCIES 575 EMERGENCY TOW HOOKS — IF EQUIPPED CAUTION! If your vehicle is equipped with tow hooks, there will be one in the rear and two mounted on the front of the Tow hooks are for emergency use only, to rescue a vehicle.
Page 578: Towing A Disabled Vehicle
576 WHAT TO DO IN EMERGENCIES 4. Using a screwdriver or similar tool, carefully remove 7. Move the shift lever to the NEUTRAL position. the shift lever override access cover, located on the 8. The vehicle may then be started in NEUTRAL. bottom of the cupholder.
Page 579 WHAT TO DO IN EMERGENCIES 577 Towing Condition Wheels OFF 2WD Models 4WD Models the Ground See instructions in “Recreational Tow- ing” under “Starting and Operating” If transmission is operable: • Transmission in PARK • Transmission in NEUTRAL Flat Tow NONE •...
Page 580: Towing Without The Ignition Key Fob
578 WHAT TO DO IN EMERGENCIES If the vehicle’s battery is discharged, refer to “Shift Lever Two-Wheel Drive Models Override” in “What to Do in Emergencies” for instruc- The manufacturer recommends towing your vehicle with tions on shifting the automatic transmission out of the all four wheels OFF the ground using a flatbed.
Page 581: Four-Wheel Drive Models
WHAT TO DO IN EMERGENCIES 579 15 miles (24 km), tow with the rear wheels OFF the the transmission is in PARK. Refer to “Recreational ground. Acceptable methods are to tow the vehicle on a Towing” in “Starting And Operating” for detailed in- flatbed, or with the front wheels raised and the rear structions.
Page 583: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment — 3.6L ... . . 583 Engine Oil ......589 Engine Compartment –...
Page 584 582 MAINTAINING YOUR VEHICLE Cooling System ..... 602 Halogen Headlamps – If Equipped ..628 Brake System .
Page 585: Engine Compartment - 3.6L
MAINTAINING YOUR VEHICLE 583 ENGINE COMPARTMENT — 3.6L 1 — Totally Integrated Power Module (Fuses) 6 — Air Cleaner Filter 2 — Engine Oil Dipstick 7 — Washer Fluid Reservoir 3 — Engine Oil Fill 8 — Coolant Pressure Cap (Radiator) 4 —...
Page 586: Engine Compartment - 5.7L
584 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT – 5.7L 1 — Totally Integrated Power Module (Fuses) 6 — Washer Fluid Reservoir 2 — Automatic Transmission Dipstick 7 — Engine Oil Dipstick 3 — Engine Oil Fill 8 — Coolant Pressure Cap (Radiator) 4 —...
Page 587: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 585 ONBOARD DIAGNOSTIC SYSTEM – OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
Page 588: Emissions Inspection And Maintenance Programs
586 MAINTAINING YOUR VEHICLE the SELECT button to turn off the message. If the Normally, the OBD II system will be ready. The OBD II problem continues, the message will appear the next time system may not be ready if your vehicle was recently the vehicle is started.
Page 589: Replacement Parts
MAINTAINING YOUR VEHICLE 587 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a.
Page 590: Maintenance Procedures
588 MAINTAINING YOUR VEHICLE your vehicle. Refer to these Service Manuals before MAINTENANCE PROCEDURES attempting any procedure yourself. The pages that follow contain the required maintenance services determined by the engineers who designed your NOTE: Intentional tampering with emissions control vehicle.
Page 591: Engine Oil
MAINTAINING YOUR VEHICLE 589 check the engine oil level is about five minutes after a CAUTION! (Continued) fully warmed engine is shut off, or before starting the • Your vehicle has been built with improved fluids engine after it has sat overnight. that protect the performance and durability of Checking the oil while the vehicle is on level ground will your vehicle and also allow extended maintenance...
Page 592 590 MAINTAINING YOUR VEHICLE Change Engine Oil American Petroleum Institute (API) Engine Oil The oil change indicator system will remind you that it is Identification Symbol time to take your vehicle in for scheduled maintenance. This symbol means that the oil has Refer to “Maintenance Schedule”...
Page 593 MAINTAINING YOUR VEHICLE 591 Engine Oil Viscosity – 3.6L Engine The engine oil filler cap also shows the recommended SAE 5W-30 engine oil is recommended for all operating engine oil viscosity for your vehicle. For information on temperatures. This engine oil improves low temperature engine oil filler cap location, refer to “Engine Compart- starting and vehicle fuel economy.
Page 594: Engine Oil Filter
592 MAINTAINING YOUR VEHICLE Materials Added To Engine Oils Engine Oil Filter Selection Do not add any supplemental materials, other than leak The manufacturer’s engines have a full-flow type dispos- detection dyes, to your engine oil. Engine oil is an able oil filter.
Page 595: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 593 Maintenance-Free Battery WARNING! Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic main- The air induction system (air cleaner, hoses, etc) can tenance required. provide a measure of protection in the case of engine backfire.
Page 596 594 MAINTAINING YOUR VEHICLE WARNING! (Continued) CAUTION! • Battery gas is flammable and explosive. Keep • It is essential when replacing the cables on the flame or sparks away from the battery. Do not use battery that the positive cable is attached to the a booster battery or any other booster source with positive post and the negative cable is attached to an output greater than 12 Volts.
Page 597: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 595 Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner • Use only refrigerants and compressor lubricants should be checked and serviced by an authorized dealer at the start of each warm season. This service should approved by the manufacturer for your air condi- include cleaning of the condenser fins and a performance tioning system.
Page 598: Body Lubrication
596 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling hood latching components to ensure proper function. R-134a Air Conditioning Refrigerant is a hydrofluoro- When performing other underhood services, the hood carbon (HFC) that is endorsed by the Environmental latch, release mechanism and safety catch should be Protection Agency (EPA) and is an ozone-saving product.
Page 599 MAINTAINING YOUR VEHICLE 597 Avoid using the wiper blades to wipe frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depend- ing on geographical area and frequency of use.
Page 600: Adding Washer Fluid
598 MAINTAINING YOUR VEHICLE 3. Grab the bottom of the wiper blade and rotate it 4. Install the wiper blade pivot pin into the wiper blade forward to unsnap the blade pivot pin from the wiper holder at the end of the wiper arm, and firmly press the blade holder.
Page 601: Exhaust System
MAINTAINING YOUR VEHICLE 599 clean the wiper blades, this will help blade performance. Exhaust System To prevent freeze-up of your windshield washer system The best protection against carbon monoxide entry into in cold weather, select a solution or mixture that meets or the vehicle body is a properly maintained engine exhaust exceeds the temperature range of your climate.
Page 602 600 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions con- and can eventually poison you.
Page 603 MAINTAINING YOUR VEHICLE 601 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
Page 604: Maintaining Your Vehicle Cooling System
602 MAINTAINING YOUR VEHICLE Cooling System accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the WARNING! face of the condenser. Check the engine cooling system hoses for brittle rubber, You or others can be badly burned by hot engine cracking, tears, cuts, and tightness of the connection at coolant (antifreeze) or steam from your radiator.
Page 605 MAINTAINING YOUR VEHICLE 603 Cooling System – Drain, Flush, And Refill CAUTION! If the engine coolant (antifreeze) is dirty and contains a • Mixing of engine coolant (antifreeze), other than considerable amount of sediment, clean and flush with reliable cooling system cleaner. Follow with a thorough the specified HOAT engine coolant (antifreeze), rinsing to remove all deposits and chemicals.
Page 606 604 MAINTAINING YOUR VEHICLE When adding engine coolant (antifreeze): CAUTION! (Continued) • The manufacturer recommends using MOPAR • This vehicle has not been designed for use with Antifreeze/ Coolant 5–Year/100,000 Mile Formula Propylene Glycol-based engine coolant (anti- HOAT (Hybrid Organic Additive Technology) or freeze).
Page 607 MAINTAINING YOUR VEHICLE 605 NOTE: Mixing engine coolant (antifreeze) types will WARNING! decrease the life of the engine coolant (antifreeze) and • The warning words DO NOT OPEN HOT on the will require more frequent engine coolant (antifreeze) changes. cooling system pressure cap are a safety precau- tion.
Page 608 606 MAINTAINING YOUR VEHICLE rules for your community. To prevent ingestion by ani- of this. As long as the engine operating temperature is mals and children, do not store ethylene glycol-based satisfactory, the coolant bottle need only be checked once engine coolant (antifreeze) in open containers or allow it a month.
Page 609: Brake System
MAINTAINING YOUR VEHICLE 607 • Do not overfill the coolant recovery bottle. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the • Check engine coolant (antifreeze) freeze point in the condenser clean.
Page 610 608 MAINTAINING YOUR VEHICLE With disc brakes, the fluid level can be expected to fall as WARNING! the brake linings wear. However, an unexpected drop in fluid level may be caused by a leak and a system check Riding the brakes can lead to brake failure and should be conducted.
Page 611: Front/Rear Axle Fluid
MAINTAINING YOUR VEHICLE 609 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
Page 612: Transfer Case
610 MAINTAINING YOUR VEHICLE The front axle fill and drain plugs should be tightened to CAUTION! 22 to 29 ft lbs (30 to 40 N·m). Do not over tighten the plugs as it could damage then CAUTION! and cause them to leak. Do not over tighten the plugs as it could damage Selection Of Lubricant them and cause them to leak.
Page 613: Automatic Transmission
MAINTAINING YOUR VEHICLE 611 Adding Fluid Automatic Transmission Add fluid at the filler hole, until it runs out of the hole, Selection Of Lubricant when the vehicle is in a level position. It is important that the proper lubricant is used in the Drain transmission to assure optimum transmission perfor- First remove fill plug, then remove drain plug.
Page 614 612 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Using a transmission fluid other than the manufac- Do not use chemical flushes in your transmission as turer’s recommended fluid may cause deterioration the chemicals can damage your transmission compo- in transmission shift quality and/or torque converter nents.
Page 615 MAINTAINING YOUR VEHICLE 613 Fluid Level Check – 5.7L Engine CAUTION! Check the fluid level while the transmission is at normal • Using a transmission fluid other than the manu- operating temperature. This occurs after at least 15 miles (25 km) of driving. At normal operating temperature the facturer’s recommended fluid may cause deterio- fluid cannot be held comfortably between the fingertips.
Page 616: Appearance Care And Protection From Corrosion
614 MAINTAINING YOUR VEHICLE 6. Remove the dipstick again, and note the fluid level on CAUTION! both sides. The fluid level should be between the “HOT” (upper) reference holes on the dipstick at normal operat- Be aware that if the fluid temperature is below 50°F ing temperature.
Page 617 MAINTAINING YOUR VEHICLE 615 passable in snow and ice, and those that are sprayed on Washing trees and road surfaces during other seasons, are highly • Wash your vehicle regularly. Always wash your ve- corrosive to the metal in your vehicle. hicle in the shade using MOPAR Car Wash or a mild The following maintenance recommendations will enable car wash soap, and rinse the panels completely with...
Page 618 616 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder, which will •...
Page 619 MAINTAINING YOUR VEHICLE 617 Wheel And Wheel Trim Care Stain Repel Fabric Cleaning Procedure – If Equipped • All wheels and wheel trim, especially aluminum and Stain Repel seats may be cleaned in the following man- chrome plated wheels, should be cleaned regularly ner: with a mild soap and water to prevent corrosion.
Page 620 618 MAINTAINING YOUR VEHICLE Interior Care taken to avoid soaking your leather upholstery with any Use MOPAR Total Clean or equivalent to clean fabric liquid. Please do not use polishes, oils, cleaning fluids, upholstery and carpeting. solvents, detergents, or ammonia-based cleaners to clean your leather upholstery.
Page 621 MAINTAINING YOUR VEHICLE 619 To minimize the possibility of scratching the lenses and Cleaning Plastic Instrument Cluster Lenses reducing light output, avoid wiping with a dry cloth. To The lenses in front of the instruments in this vehicle are remove road dirt, wash with a mild soap solution fol- molded in clear plastic.
Page 622: Fuses
620 MAINTAINING YOUR VEHICLE Replace the belts if they appear frayed or worn or if the buckles do not work properly. FUSES Totally Integrated Power Module The Totally Integrated Power Module is located in the engine compartment. This center contains cartridge fuses and mini fuses.
Page 623 MAINTAINING YOUR VEHICLE 621 Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 30 Amp Trailer Tow 30 Amp Headlamp Wash Pink Pink Relay Contact 25 Amp Driver Door Node 30 Amp Drive Train Control Natural Pink Module 25 Amp Passenger Door...
Page 624 622 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 20 Amp Powertrain Control 20 Amp Electronic Limit Blue Module/Powertrain Yellow Slip Differential/ Control Module Air Suspension Transmission Range 20 Amp Liftgate/Headrest 60 Amp Radiator Fan Motor Yellow Yellow...
Page 625 MAINTAINING YOUR VEHICLE 623 Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 15 Amp Video/Universal 20 Amp Power Seat Blue Garage Door Yellow Module(s)/ Opener Adaptive Cruise Control/Audio 10 Amp Heating, Ventilation Telematics/Daytime & Air Conditioning Running Lights (Climate Control Relay/Air Suspen-...
Page 626 624 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 15 Amp Instrument Cluster 10 Amp Ignition Switch/ Blue Wireless Control Module/Keyless 20 Amp Automatic Shut- Entry Module Yellow down 3 15 Amp Powertrain 10 Amp Horns (Low/High) Blue...
Page 627 MAINTAINING YOUR VEHICLE 625 Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 10 Amp Powertrain 25 Amp All Door Lock Controller/ Natural &Unlock Transmission Con- troller CAUTION! 10 Amp Park Assist • When installing the totally integrated power mod- Module/Climate ule cover, it is important to ensure the cover is Control System...
Page 628: Vehicle Storage
626 MAINTAINING YOUR VEHICLE • Anytime you store your vehicle, or keep it out of CAUTION! (Continued) service (i.e. vacation) for two weeks or more, run the • When replacing a blown fuse, it is important to air conditioning system at idle for about five minutes use only a fuse having the correct amperage rating.
Page 629: Bulb Replacement
MAINTAINING YOUR VEHICLE 627 BULB REPLACEMENT Exterior Lights Bulb Type Aux Aperature Backup Lamps ..7440 (W21W) High Intensity Discharge Headlamps (HID) – If Auxiliary Liftgate Tail Lamps ....W3W Equipped Front Park/Turn Lamp .
Page 630: Halogen Headlamps - If Equipped
628 MAINTAINING YOUR VEHICLE NOTE: On vehicles equipped with High Intensity Dis- CAUTION! charge (HID) headlamps, when the headlamps are turned on, there is a blue hue to the lamps. This dimin- Do not touch the new bulb with your fingers. Oil ishes and becomes more white after approximately contamination will severely shorten bulb life.
Page 631: Front Fog Lamps
MAINTAINING YOUR VEHICLE 629 CAUTION! CAUTION! • Do not touch the new bulb with your fingers. Oil Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the contamination will severely shorten bulb life. If bulb comes in contact with any oily surface, clean the the bulb comes in contact with any oily surface, bulb with rubbing alcohol.
Page 632: Rear Tail, Stop, Turn Signal, And Backup Lamps
630 MAINTAINING YOUR VEHICLE 6. Firmly and evenly push the bulb straight into the lamp housing until both tabs snap firmly into place and are fully engaged. 7. Connect the wiring harness to the front fog lamp connector. Rear Tail, Stop, Turn Signal, And Backup Lamps 1.
Page 633: Rear Liftgate Mounted Tail Lamp
MAINTAINING YOUR VEHICLE 631 Rear Liftgate Mounted Tail Lamp 1. Raise the liftgate. 2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate. 3. Once lower trim is loose, close the liftgate. 4.
Page 634: Center High-Mounted Stop Lamp (Chmsl)
632 MAINTAINING YOUR VEHICLE Center High-Mounted Stop Lamp (CHMSL) Rear License Lamp The center high-mounted stop lamp is an LED assembly. 1. Use a screw driver to gently pry against the side of the See your authorized dealer for replacement. snap tab to remove the license lamp lens.
Page 635: Fluid Capacities
MAINTAINING YOUR VEHICLE 633 FLUID CAPACITIES U.S. Metric Fuel (Approximate) All Engines 24.6 Gallons 93 Liters Engine Oil with Filter 3.6L Engine (SAE 5W-30, API Certified) 6 Quarts 5.6 Liters 5.7L Engine (SAE 5W-20, API Certified) 7 Quarts 6.6 Liters Cooling System * 3.6L Engine (MOPAR Engine Coolant/Antifreeze 10.4 Quarts...
Page 636: Fluids, Lubricants, And Genuine Parts
634 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hy- brid Organic Additive Technology) or equivalent. Engine Oil – 3.6L Engine Use API Certified SAE 5W-30 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Page 637: Chassis
MAINTAINING YOUR VEHICLE 635 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. Transfer Case – 3.6L Engine Shell Automatic Transmission Fluid 3353 or equivalent. Transfer Case – 5.7L Engine MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product.
Page 638 636 MAINTAINING YOUR VEHICLE Component Fluid, Lubricant, or Genuine Part Power Steering Reservoir – MOPAR Hydraulic Fluid or equivalent meeting MS-11655, such as Fuchs 3.6L Engine EG ZH 3044 or Pentosin CHF 11s. Power Steering Reservoir – MOPAR Power Steering Fluid +4, MOPAR ATF+4 Automatic Trans- 5.7L Engine mission Fluid or equivalent licensed ATF+4 product.
Page 639 MAINTENANCE SCHEDULES CONTENTS Maintenance Schedule ....638 Required Maintenance Intervals ..639...
Page 640 638 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE is required for your vehicle. Have your vehicle serviced The Scheduled Maintenance services listed in this as soon as possible, within the next 500 miles (805 km). manual must be done at the times or mileages specified NOTE: to protect your vehicle warranty and ensure the best •...
Page 641 MAINTENANCE SCHEDULES 639 • Check the fluid levels of the coolant reservoir, brake referring to the steps described under “Electronic Vehicle Information Center (EVIC)/Oil Change Required” in master cylinder, power steering and transmission “Understanding Your Instrument Panel” for further in- (5.7L only) and add as needed.
Page 642 640 MAINTENANCE SCHEDULES 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 643: Service Schedule
MAINTENANCE SCHEDULES 641 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 644 642 MAINTENANCE SCHEDULES 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 645 MAINTENANCE SCHEDULES 643 56,000 Miles (91,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 56,000 miles (91 000 km). Odometer Reading Date Repair Order #...
Page 646 644 MAINTENANCE SCHEDULES 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). ❏...
Page 647 MAINTENANCE SCHEDULES 645 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 648 646 MAINTENANCE SCHEDULES 88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer Reading Date Repair Order #...
Page 649 MAINTENANCE SCHEDULES 647 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏...
Page 650 648 MAINTENANCE SCHEDULES 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 651 MAINTENANCE SCHEDULES 649 120,000 Miles (195,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏...
Page 652 650 MAINTENANCE SCHEDULES 128,000 Miles (208,000 km) or 96 Months Maintenance Service 136,000 Miles (221,000 km) or Schedule 102 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 653 MAINTENANCE SCHEDULES 651 144,000 Miles (234,000 km) or 108 Months Maintenance Service 152,000 Miles (247,000 km) or Schedule 114 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 654 652 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
Page 655: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Customer Assistance For The Hearing Or Vehicle......655 Speech Impaired (TDD/TTY) .
Page 656 654 IF YOU NEED CONSUMER ASSISTANCE Department Of Transportation Uniform Tire Traction Grades ..... 661 Quality Grades ......661 Temperature Grades .
Page 657: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 655 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
Page 658: Chrysler Group Llc Customer Center
656 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 solved with this process. Auburn Hills, MI 48321–8004 Phone: (877) 426–5337 •...
Page 659: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
IF YOU NEED CONSUMER ASSISTANCE 657 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
Page 660: Warranty Information
658 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
Page 661: In Canada
IF YOU NEED CONSUMER ASSISTANCE 659 If NHTSA receives similar complaints, it may open an Canada, Motor Vehicle Defect Investigations and Recalls at investigation, and if it finds that a safety defect exists in 1-800-333-0510 or go to http://www.tc.gc.ca/roadsafety/ a group of vehicles, it may order a recall and remedy PUBLICATION ORDER FORMS campaign.
Page 662 660 IF YOU NEED CONSUMER ASSISTANCE • Owner’s Manuals vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, These Owner’s Manuals have been prepared with the and charts. assistance of service and engineering specialists to • Diagnostic Procedure Manuals acquaint you with specific Chrysler Group LLC ve- hicles.
Page 663 IF YOU NEED CONSUMER ASSISTANCE 661 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
Page 664 662 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
Page 665 INDEX...
Page 666 664 INDEX Adaptive Cruise Control (ACC) (Cruise Control) . . 205 Alarm (Security Alarm) ....20,297 Adding Fuel ......527 Alarm, Panic .
Page 667 INDEX 665 Fluid Level Check ....612,613 Master Cylinder ..... 608 Fluid Type .
Page 668 666 INDEX Cargo Area Features ..... . 272 Cleaning Cargo Compartment ..... . 272 Wheels .
Page 669 INDEX 667 Coolant Capacity ..... 633 Dipsticks Coolant Level ..... . . 606 Automatic Transmission .
Page 670 668 INDEX Electronic Brake Control System ... . . 474 Block Heater ......427 Anti-Lock Brake System .
Page 671 INDEX 669 Starting ......421 Flashers ......558 Temperature Gauge .
Page 672 670 INDEX Fluids, Lubricants and Genuine Parts ..634 Gauge ......297 Fog Light Service .
Page 673 INDEX 671 Gauges Replacing ......628 Coolant Temperature ....298 Heated Mirrors .
Page 674 672 INDEX Infant Restraint ......83 Key, Programming ......20 Inflation Pressure Tires .
Page 675 INDEX 673 Lights ......100,182 High Beam Indicator ....291 Airbag .
Page 676 674 INDEX Turn Signal ....100,182,628,630 Memory Seat ......176 Vanity Mirror .
Page 677 INDEX 675 Multi-Displacement Engine System ... 471 Filter Disposal ..... . . 592 Multi-Function Control Lever .
Page 678 676 INDEX Park Sense System, Rear ....233 Windows ......42 Parking Brake .
Page 679 INDEX 677 Rear Park Sense System ....233 Replacement Bulbs ..... . . 626 Rear Seat, Folding .
Page 680 678 INDEX Seat Belt Reminder ..... . . 66 Rear Folding ......173 Seat Belts .
Page 681 INDEX 679 Shoulder Belts ......53 Starting and Operating ....421 Side Airbag .
Page 682 680 INDEX Synthetic Engine Oil ..... . 591 General Information ....497 System, Remote Starting .
Page 683 INDEX 681 Tow Hooks, Emergency ....575 Transfer Case ......610 Tow/Haul Indicator Light .
Page 684 682 INDEX Universal Transmitter ..... 246 Warranty Information ..... 658 Untwisting Procedure, Seat Belt .
Page 685 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use only frequency signals.
Page 686 Chrysler Group LLC 12WK741-126-AC 3rd Edition Printed in U.S.A.

This manual is also suitable for:

2011 grand cherokee

Jeep Grand Cherokee Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Quick Links

Chapters

Related Manuals for Jeep Grand Cherokee

Summary of Contents for Jeep Grand Cherokee