Jeep 2014 Grand Cherokee Owner's Manual page 98

96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3. Raise the armrest and attach the tether hook to the
strap located on the front of the arm rest.
Center Seat Position Arm Rest Tether Attached
To Install A LATCH-compatible Child Restraint
1. If the selected seating position has a Switchable Auto-
matic Locking Retractor (ALR) seat belt, stow the seat belt
following the instructions below. See the section "Install-
ing Child Restraints Using the Vehicle Seat Belt" to check
what type of seat belt each seating position has.
2. Loosen the adjusters on the lower straps and on the
tether strap of the child seat so that you can more
easily attach the hooks or connectors to the vehicle
anchorages.
3. Place the child seat between the lower anchorages for
that seating position. For some second row seats, you
may need to recline the seat and / or raise the head
restraint to get a better fit. If the rear seat can be moved
forward and rearward in the vehicle, you may wish to
move it to its rear-most position to make room for the
child seat. You may also move the front seat forward
to allow more room for the car seat.