Stereo Mix Outputs - E-Mu Proteus 1000 Operation Manual

Stereo Mix
Outputs
This feature is useful for adding signal processing (EQ, reverb, etc.) of
individual sounds prior to final mixdown.
The routing can be performed according to MIDI channel from the Mix
Output screen in the Master menu. Simply assign each channel to the
desired output.
MIX OUTPUT
Master
channel 01: Send 2
Menu
To route a particular preset to a Send, first go to the Mix Output screen in
the Master menu and set the MIDI channel to "Preset".
MIX OUTPUT
Master
Menu
channel 01: Preset
Next set the Mix Output routing in the preset to the desired output (for
each layer). Yes, you can send each layer to a different send if you want.
L1
Edit
Menu
Send 2
By sending different amounts of presets to the effects, subtle or striking
effects can be achieved using the two effect processors. This feature allows
you to get the most out of two effects since you can have eight different
mixes.
For more information, refer to the diagram on the following page or, See
"Mix Output" on page 37.
MIX OUTPUT
Proteus 1000 Operation Manual 83
Programming Basics

Stereo Mix Outputs