E-Mu Proteus 1000 Operation Manual page 104

96 E-MU Systems
Press the Edit button to access the Edit menu.
1.
Go to the Instrument screen and select Instruments for Layers 1
2.
through 4.
Press Enter, then use the Data Entry Control to advance to the Real-
3.
time Crossfade page.
L1
RT: LO
000
L2
RT: LO
032
L3
RT: LO
064
L4
RT: LO
096
Define the High and Low range of each Layer as shown above.
4.
Press Home/Enter and use the Data Entry Control to advance to the
5.
PatchCord page. Select Layer 1.
Select XfdRnd as the modulation source and RTXfade as the desti-
6.
nation. Set the Cord Amount to +100.
Repeat step 6 for the remaining three layers.
7.
Defining Layer Parameters
FADE HIGH
000 031
FADE HIGH
000 063
FADE HIGH
000 095
FADE HIGH
000 127
Edit Menu
FADE
000
FADE
000
FADE
000
FADE
000