E-Mu Proteus 1000 Operation Manual page 143

Move the cursor to the last field in the line. This is the Amount field.
4.
The Amount field determines the amount of modulation applied. Set
this value to "+100."
L1
PATCHCORD
FiltEnv+
This setup connects the Filter Envelope Generator to the Filter Cutoff as
shown in the following diagram.
Instrument
Tone
Now, return to the Filter Envelope Mode screen. Set the Mode to "time-
5.
based."
L1
FILTER ENVELOPE
Mode: time-based
Advance to the Filter Envelope parameter page.
6.
L1
FILT ENV
Attack1
Move the cursor underneath the time field and change the value to
7.
about +50. Now when you press a key the filter slowly sweeps up.
-> FiltFreq
Filter
DCA
Fc Q
Filter Env.
RATE
50
Proteus 1000 Operation Manual 135
Programming Tutorial
Editing Presets
#01
+100
R
Pan
L
LEVEL
100%