Sync; Rate - E-Mu Proteus 1000 Operation Manual

LFO Synced to 1/4 Note Clock
L1
LFO1

Sync

The Sync field specifies whether the LFO is synchronized to a key stroke or
is Free Running. Key Sync starts the LFO wave at the beginning of its cycle
each time you press a key on the controller. In Free Run mode, the LFO
wave begins at a random point in its cycle each time you press a key on the
controller.

Rate

The Rate field determines the LFO speed in absolute frequency rate values
or tempo-based note values. All values equal to or greater than zero specify
absolute frequency values from 0.08 Hz to 18.14 Hz.
Values less than zero specify tempo-based rates. If you modulate the rate of
a tempo-based LFO, the rates will jump between the tempo-based note
values with each PatchCord increment of "1". As an example: if the LFO
rate was set to 8/1 and you patched the Mod Wheel to control rate with a
PatchCord amount of +1, turning the Mod Wheel to maximum would
change the LFO rate to 4/1d. Refer to the chart below.
L1
LFO1
Tempo-based Rates
(based on Master Clock Tempo)
octal whole note
dotted quad whole note
octal whole note triplet
quad whole note
dotted double whole note
quad whole note triplet
double whole note
dotted whole note
Low Frequency Oscillators (LFOs)
SHAPE
sawtooth
RATE DELAY
0.08Hz 60
Proteus 1000 Operation Manual 111
Edit Menu
SYNC
key sync
VAR
020
Display
8/1
4/1d
8/1t
4/1
2/1d
4/1t
2/1
1/1d