E-Mu Proteus 1000 Operation Manual page 101

To Set Up a Velocity Crossfade Between Layers
Set the velocity fades so that layer 1 fades out with higher key velocity,
while layer 2 fades in. At a velocity of 64, the two sounds are equal volume.
You may want to adjust the fade in and fade out points to achieve a natural
sounding crossfade. These parameters vary depending on the sounds.
0
Layer 1
Layer 1
L1
VEL: LO
000
L2
VEL: LO
Increasing Velocity
FADE
000
FADE
000 127
Defining Layer Parameters
Layer 2
Layer 2
HIGH FADE
127 127
HIGH FADE
127 000
Proteus 1000 Operation Manual 93
Edit Menu
127