Sanyo PLC-XK2200 Owner's Manual page 54

Setting
Use the Point buttons to enter a number. Press the
Point buttons to fix the number and move the red
frame pointer to the next box. The number changes to
. If you fixed an incorrect number, use the Point
buttons to move the pointer to the number you want to
correct, and then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
Set. Press the SELECT button so that you can change
the following PIN code lock setting.
If you entered an incorrect PIN code,
number ( ) will turn red for a moment. Enter the
correct PIN code all over again.
Use the Point buttons to select
and then press the SELECT button to make a choice.
The PIN code can be changed to your desired four-
digit number. Press the SELECT button to select
. Pin code dialog box appears, use the
Point buttons to enter the correct code. The New
PIN code input dialog box appears. Set a new PIN
code.
54
and the
, On 1 or On 2,
Current PIN code