Sanyo PLC-XK2200 Owner's Manual page 24

Basic Operation
Direct Operation
Volume
Press the VOLUME+/– buttons on the top control or on
the remote control to adjust the volume. The volume
dialog box appears on the screen for a few seconds.
Mute
Press the MUTE button on the remote control to select
On to temporarily turn off the sound. To turn the sound
back on, press the MUTE button again to select
press the VOLUME +/– buttons. The Mute function is
also effective for the AUDIO OUT jack.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
Press the Point or the SELECT button to access
the submenu items.
2 Use the Point buttons to select the desired
submenu item and press the SELECT button to
access the selected item.
Volume
Press the Point button to turn up the volume; Press
the Point button to turn down the volume.
Mute
Press the SELECT button to switch the mute function
. When the sound is turned off, On is displayed. Press
the VOLUME +/– buttons again or adjust MIC gain's
volume to turn the sound back on.
Use the Point buttons to switch the MIC function
On/ and then press the SELECT button. When On is
selected, the synthesis volume (MIC and RCA) is output.
Press the Point button to turn up the MIC mixing gain;
Press the Point button to turn down the MIC mixing
gain.
When switch the Standby MIC out function On and in
Standby mode status only MIC volume can be output.
• When is selected in MIC function, the
MIC gain and Standby MIC out functions are
not available.
• Only the Standby mode is set to Network,
• If the MIC function is turned on when
connecting PC audio to the AUDIO IN (a mini
jack), loud sound may be output suddenly
depending on the setting value of MIC gain.
24
or
buttons to select Sound.
can be selected.
Press the MUTE button to set the Mute
function On or
disappears after 4 seconds.
Sound Menu
MIC Setup
RCA L/R terminal
MIC Off Video audio input
MIC On Video or PC audio input
Approximate level of
the volume.
. The dialog box
AUDIO IN
Mini jack
PC audio input
MIC input