Sanyo PLC-XK2200 Owner's Manual page 25

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables
you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER 1/2, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control to select
the input source. See pages 27, 36-37 for details.
Press the FREEZE button on the remote control to
freeze the picture on the screen, meanwhile, volume
is muted. To cancel the Freeze function, press the
FREEZE button again or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1
Display the input source information:
, , Screen, Language, Lamp status,
Lamp counter, Power management,
Press the D.ZOOM buttons on the remote control to
enter to the Digital zoom +/– mode. See page 35 for
details.
Press the LAMP button on the remote control to select
the lamp mode for changing the brightness on the
screen.
High .............. Brighter than the Normal mode.
Normal.......... Normal brightness
Eco ............... Lower brightness reduces the lamp
power consumption and extends the
lamp life.
,
,
and (p.57).
Basic Operation
See the next page for the description of
other buttons.
25