Sanyo PLC-XK2200 Owner's Manual page 37

Direct Operation
Choose
button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen
and then press the Point
2
and then press the Point
3
and then press the SELECT button.
When the input source is coming
Component
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with
a Component-VGA Cable, select
Component.
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with a
Scart-VGA Cable, select
When the Input Search function is set to On 1
or On 2, the input signal will be searched
automatically (p.45).
or
or the SELECT button.
Computer 1
button.
Component or
.
by pressing the COMPONENT or the COMPUTER 1
to select Component or
.
37