Sanyo PLC-XK2200 Owner's Manual page 48

Setting
Use the Point buttons to enter a number. Press the
Point buttons to fix the number and move the red
frame pointer to the next box. The number changes to
. If you fixed an incorrect number, use the Point
buttons to move the pointer to the number you want to
correct, and then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
Set. Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect Logo PIN code,
code and the number (
moment. Enter the correct Logo PIN code all over again.
Use the Point buttons to switch On or
press the SELECT button to make a choice.
Logo PIN code can be changed to your desired four-
digit number. Press the SELECT button to select Logo
. Current
appears, use the Point
code. The New Logo PIN code input dialog box appears.
Set a new Logo PIN code, confirmation box appears,
choose to set the new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting.
48
) will turn red for a
, and then
dialog box
buttons to enter the correct
Logo PIN code
After a correct Logo PIN code
is entered, the following dialog
box appears.
Current logo PIN code
Exit ----