Sanyo PLC-XK2200 Owner's Manual page 27

Direct Operation
Choose either
the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Menu Operation
Press the MENU button to display the On-Screen
1
2
and then press the SELECT button.
When Computer 1 is selected, press the Point
3
to access the submenu items. Use the
and then press the SELECT button.
When the Input Search function is set to
On 1 or On 2 in the Auto setup function, the
input signal will be searched automatically
(p.45).
or by pressing the COMPUTER 1 or COMPUTER 2 button on
Computer 1.
Computer 2
Computer
1
27