Sanyo PLC-XK2200 Owner's Manual page 46

Setting
Background
Select the background screen for when no input signal is
detected. Press the Point
each option.
Blue . . . Project a blue background.
. . . Project an image captured in the Logo
setting.
Black . . Project a black background.
This function decides whether to display On-Screen
Displays.
On............................ Show all the On-Screen displays.
Use this function when you want
to project images after the lamp
becomes bright enough. The factory
default setting is in this option.
....... Show the input image instead of
the countdown when turning on the
projector. Use this function when
you want to project the image as
early as possible even when the
lamp is not bright enough.
........................... Hide the On-Screen Displays
except;
This function allows you to customize the screen logo
with Logo select, Capture,
When On is selected in the Logo PIN code
lock function, Logo select and Capture
functions cannot be selected.
Logo select
This function decides on the starting-up display from
among following options.
......... Show the image you captured.
.... Show the factory-set logo.
........... Show the countdown display only.
46
buttons to switch between
On-Screen Menu.
(p. 20)
P-Timer display. (p. 26)
No signal for Power
management (p. 49)
Please wait ...
Arrows for the True function in
the Screen Menu. (p. 34)
and
functions.
Logo select