Kyocera ECOSYS P7035cdn Operation Manual page 94

Detail:
File Name:
ABCDEFGHIJKLMNOPQRSTN
Detail:
Folder Name:
ABCDEFGHIJKLMNOPQRSTN
Detail:
File Name:
ABCDEFGHIJKLMNOPQRSTN
Detail:
ABCDEFGHIJKLMNOPQRSTU
VWXYZabcdefghijklmnop
qrstuvwxyz1234567890
Cannot remove the
memory while in use.
4-22
Detail (Shows the details of the selected file)
Use this to view detailed information on the files and folders in the USB
memory.
1
2
3
P b
1/ 4
[ Detail ]
P b
1/ 2
[ Detail ]
If the entire name shown as the File Name or Folder Name will not fit
P b
on one line, pressing [Detail] ([Right Select]) changes to a 3-line
1/ 4
name display. If the name is 3 or more lines long, you can scroll up or
down by pressing  or .
[ Detail ]
Pressing [OK] while file or folder details are displayed returns you to the
O b
USB Memory menu.
Remove Memory (Removing the USB memory)
Allows you to remove a USB memory device.
1
2
IMPORTANT If the screen on the left appears, the USB memory is
still being used. Wait until the relevant job (e.g. printing from the USB
memory) has ended and then repeat the Remove Memory procedure.
Use the procedure described in Print File (Printing and checking the
files in the USB memory) on page 4-20 to display a list of the files or
folders you want to check.
Press  or  to select the folder or file you want to check.
Press [Detail] ([Right Select]). The Detail screen appears.
If you selected a file, there are 4 Detail screens. Press  or  to
move between the screens.
If you selected a folder, there are 2 Detail screens. Press  or  to
move between the screens.
In the USB Memory menu, press  or  to select Remove Memory.
Press [OK]. The printer is now ready for the USB memory to be
removed and the Mode Selection menu screen appears.
Using the Operation Panel