Kyocera ECOSYS P7035cdn Operation Manual page 165

Sleep Level Set.: a b
1
Sleep Level
2
Status
Sleep Level:
1
Quick Recovery
2 *Energy Saver
Sleep Level Set.: a b
1
Sleep Level
2 Status
Status:
1 Network
Using the Operation Panel
1
2
[ Exit ]
Sleep Level (Sleep level setting)
There are two sleep modes with different levels of sleep: Quick Recovery
and Energy Saver.
Quick Recovery Mode: The recovery from the sleep mode is faster than
when using Energy Saver mode.
Energy Saver Mode: This makes it possible to reduce energy
consumption even further than with Quick Recovery mode. With Energy
Saver mode, you can set whether to enable the Energy Saver mode for
each separate function.
1
2
a b
3
4
[ Exit ]
Network (Setting for entering energy-saving mode when
connected to a network)
This sets whether or not the machine enters Energy Saver mode when
connected to a network.
1
a b
2
[ Exit ]
In the Timer Setting menu, press  or  to select Sleep Level
Set..
Press [OK]. The Sleep Level Set. menu screen appears.
Note For information on the Quick Recovery mode and Energy
Saver mode, refer to Energy Saver Function on page 2-26.
Sleep Level Set. menu is not displayed when the optional network
interface kit (IB-50) or wireless network interface kit (IB-51) has
been installed.
In the Sleep Level Set. menu, press  or  to select Sleep Level.
Press [OK]. The Sleep Level screen appears.
Press  or  to select Quick Recovery or Energy Saver.
Press [OK]. The sleep level is set and the Sleep Level Set.
menu reappears.
In the Sleep Level Set. menu, press  or  to select Status.
Note Status is only displayed when Energy Saver is set.
Press [OK]. The Status menu screen appears.
4-93