Kyocera ECOSYS P7035cdn Operation Manual page 76

Message
Please wait.
Please wait.
Loading paper...
Please wait.
Adding toner...
Please wait.
Performing
Color Calibration...
Please wait.
Cleaning...
Please wait.
Regulating
the temperature...
Refreshing drum.
Please wait.
Ready to print.
(Ress the OK key to
wakeup screen)
Processing.
Low power.
Sleeping.
Canceling...
Restarting...
Please wait.
4-4
Status Information
Meaning
The printer is warming up and is not ready.
When the printer is switched on for the first time, this message will take several minutes.
This message appears when the printer is preparing to print coated paper (Coated) fed
from the optional paper feeder PF-510.
Toner is currently being replenished. This message may be displayed during continuous
printing of a large volume of pages which require a large amount of toner such as with
photographs, etc.
The color calibration function is being performed automatically as you powered on the
printer. You can also execute this function manually on the operation panel.
For details, refer to ColorCalibration on page 4-119.
Displayed during LSU cleaning.
This printer is not prepared while cooling fuser unit.
The drum refresh is in progress. Please wait.
The printer is ready to print.
It may take a short time before the message display appears after the [OK] key is
pressed.
The printer is receiving data to print. This is also shown when the printer is reading a USB
memory, SSD or RAM disk.
The printer is in Low Power Mode. The printer wakes from Low Power Mode whenever a
print job is received. The printer then warms up and goes on-line.
For details on Low Power Mode, refer to Low Power Timer (Low Power Mode timer
timeout time) on page 4-91.
The printer is in Auto Sleep. The printer wakes from Auto Sleep whenever a print job is
received. The printer then warms up and goes on-line.
For details on Auto Sleep, refer to Sleep Timer (Sleep timer timeout time) on page 4-94.
Jobs inside the printer are being canceled. To cancel a job, refer to Canceling a Printing
Job on page 4-6.
The printer is restarting. Please wait.
Error Codes
Refer to the Troubleshooting on page 6-1.
Using the Operation Panel