Kyocera ECOSYS P7035cdn Operation Manual page 176

IPSec:
1 Off
2 *On
LAN Interface:
1 *Auto
2
10BASE-Half
3
10BASE-Full
I/F Block Set.:
1 USB Host
2 USB Device
3
Option I/F
4-104
2
a b
3
4
LAN Interface (LAN Interface setting)
Specify the settings for the LAN interface to be used. The default setting
is Auto.
1
2
a b
3
4
I/F Block Set. (External interface block setting)
You can use this to lock and thereby protect the interface.
The options available in I/F Block Set. are as follows:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Option I/F (Network interface card (NIC) setting)
• USB Storage (USB memory setting)
1
2
a b
[ Exit ]
Press [OK]. The IPSec screen appears.
Press  or  to select whether IPSec is enabled.
Press [OK]. The IPSec setting is set and the Network Security menu
reappears.
In the Network Security menu, press  or  to select LAN Interface.
Press [OK]. The LAN Interface screen appears.
The available LAN Interfaces are as follows:
Auto
10BASE-Half
10BASE-Full
100BASE-Half
100BASE-Full
1000BASE-T
Press  or  to select the desired LAN Interface.
Press [OK]. The LAN Interface is set and the Network Security
menu reappears.
In the Security menu, press  or  to select I/F Block Set..
Press [OK]. The I/F Block Set. menu screen appears.
Using the Operation Panel