Kyocera ECOSYS P7035cdn Operation Manual page 40

2-14
4
Select the device to be installed.
You can also select Use host name for port name and set to use the
host name of the standard TCP/IP port. (A USB connection cannot be
used.)
Note The machine cannot be detected unless it is on. If the
computer fails to detect the machine, verify that it is
connected to the computer via a network or USB cable and
that it is turned on and click
5
Select the package to be installed.
Packages include the following software:
• Driver Package
KX DRIVER, Status Monitor, Fonts
6
Click Install.
7
Finish the installation.
When Your software is ready to use appears, you can use the
software. To print a test page, click the Print a test page checkbox
and select the machine.
Click Finish to exit the wizard.
Note When you have selected Device settings in Windows
XP, the dialog box for device setting will appear after Finish is
clicked. Configure the settings for options installed on the
machine. Device settings can be configured after the
installation is completed. For details, refer to the Device
Settings in the Printer Driver User Guide on the DVD-ROM.
If a system restart message appears, restart the computer by
following the screen prompts. This completes the printer driver
installation procedure.
(Reload).
Printing Operation