Kyocera ECOSYS P7035cdn Operation Manual page 121

Using the Operation Panel
Setting the Paper Thickness
You set the paper thickness by selecting a paper weight.
The available paper weights are as follows (grammages are provided as
a guide)
Extra Heavy (OHP)
Heavy 3 (170 to 220 g/m
Heavy 2 (135 to 170 g/m
Heavy 1 (120 to 135 g/m
2
Normal 3 (90 to 120 g/m
2
Normal 2 (75 to 90 g/m )
2
Normal 1 (64 to 75 g/m )
2
Light (60 to 64 g/m )
The default setting is Normal 2 for plain paper. When using any paper
other than plain paper, you should change the paper weight referring to
the table below to achieve the best possible print quality for each paper.
Media Type
Plain
Transparency
Rough
Vellum
Labels
Recycled
Preprinted
Bond
Cardstock
Color
Prepunched
Letterhead
Envelope
Coated
Thick
HighQuality
CUSTOM1 to 8
Use the procedure below to set the paper weight.
(For the procedure for setting weights for custom paper (CUSTOM 1 to
8), refer to Custom Paper Settings on page 4-50.)
2
)
2
)
2
)
)
Paper Weight
Normal 2
Extra Heavy
Normal 3
Light
Heavy 1
Normal 2
Normal 2
Normal 3
Heavy 2
Normal 2
Normal 2
Normal 2
Heavy 3
Normal 3
Heavy 2
Normal 3
Normal 2
4-49