Kyocera ECOSYS P7035cdn Operation Manual page 164

Sleep Level Set.: a b
1 Status
Status:
1 Network
Network:
1 Off
2 *On
4-92
4
Sleep Level Set. (Sleep level setting)
For Europe
This sets whether or not the machine enters sleep mode when connected
to a network.
1
2
[ Exit ]
3
a b
[ Exit ]
4
a b
5
6
Except for Europe
Select the sleep level.
The options available in Sleep Level Set. are as follows:
• Sleep Level (Sleep level setting)
• Network (Setting for entering energy-saving mode when connected to
Press  or  to increase or decrease, respectively, the value at the
blinking cursor.
Use  and  to move the cursor right and left.
The timer can be set between 1 and 120 min (for Europe) or 1 and
240 min (except for Europe).
Press [OK]. The low power time setting is stored and the Timer
Setting menu reappears.
In the Timer Setting menu, press  or  to select Sleep Level
Set..
Press [OK]. The Sleep Level Set. menu screen appears.
Press [OK]. The Status menu screen appears.
Press [OK]. The Network screen appears.
Press  or  to select whether or not to use Energy Saver mode.
Select On to set the Energy Saver mode.
Press [OK]. Set the Energy Saver mode and Status menu
reappears
a network)
Note Network is only displayed when Sleep Level is set to
Energy Saver.
Using the Operation Panel