Operating Instructions; View Button; Activate Jets Pump 1; Activate Jets Pump 2 - Jacuzzi J-460 Owner's Manual

9.0 Operating Instructions

Your Jacuzzi® spa has a touch-sensitive control panel, massage selec-
tors, and air control knobs located on the top rim of the spa (page 20-23).
These controls let you operate many of the special functions of your
Jacuzzi spa. By familiarizing yourself with the following information, you
will be able to gain the full benefit from using your spa .

9.1 View Button

Pressing this button inverts the main four-digit display on the
command center's LCD screen to allow easy reading from either
inside or outside the spa.

9.2 Activate Jets Pump 1

The button labeled JETS 1 controls jets pump #1. Pressing this
button cycles jets pump #1 on and off.

9.3 Activate Jets Pump 2

The button labeled JETS 2 controls jets pump #2. Pressing this
button cycles pump #2 on and off.
Auto Turn Off — Anytime a pump has been manually turned on, it will
automatically turn off after approximately 20 minutes. If at this time you
desire more jet operation you may simply turn the pump(s) back on.

9.4 Selecting The Desired Massage Action

Your Jacuzzi spa is equipped to allow you to customize
the massage action you desire. Each model incorporates a
massage selector that allow you to customize the mas-
sage and performance by diverting water between various
jet systems. Simply turn massage selector to position A
(Combo), B, or C to divert water pressure to various jet
groups. Note: The massage selector valve(s) is designed
to operate in positions A (Combo), B, and C for optimum
performance. It is considered normal for sound levels
within the valve to vary between positions due to the large
amounts of water flowing through it! For optimum filtration
benefits, leave the valve in position A when spa is cov-
ered. Select position B or C for maximum jet performance
during spa use.
Page 24
B B C C
A A