Spa Maintenance; Cleaning The Filter Cartridges - Jacuzzi J-460 Owner's Manual

Jacuzzi lcd series hot tub owner’s manual
Table of Contents

Advertisement

11.7 Programming The Change Filter Reminder
Your new spa is equipped with a programmable "Change Filter" reminder
icon that flashes on the control panel display after a specified number of
days. It is designed to remind you to clean the skimmer filter cartridge on
a regular basis but does not affect spa operation in any way. The
"Change Filter" reminder must be reset at each filter cleaning
interval. It offers a selectable range from 10-120 days or can be
disabled (turned off). We recommend an initial setting of 60 days
(2 months) to remind you to check your filters after your first 2
months of operation. At this time, you can easily determine whether you
need to change this interval by visually inspecting the filter cartridge an
polishing bag. Note: this reminder must be reset at each filter cleaning
interval. Refer to section 12.1 below for filter cleaning instructions.
Programming Instructions
1. Press the CYCLE
indicating the "Change Filter" display program has been accessed.
2. Press SELECT
duration or to view days elapsed since last filter cleaning interval.
3. Press WARMER
setting as follows:
0 - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 - OFF
4. Press DISPLAY
standard water temperature display. Note: If no button is pressed
within 30 seconds, all changes are recorded and the screen auto-
matically returns to the standard water temperature display.

12.0 Spa Maintenance

Proper and regular maintenance of your spa will help it retain its beauty
and performance. Your authorized Jacuzzi dealer can supply you with
all the information, supplies, and accessory products you will need to
accomplish this.

12.1 Cleaning The Filter Cartridges

A programmable "Change Filter" reminder icon flashes on the
control panel display after a specified number days to remind
you to clean the skimmer filter and to check the polishing bag
filter. This reminder must be reset at each filter cleaning interval.
Refer to section 11.7 (above) for additional information and pro-
gramming details. Your new spa is equipped with an advanced
2-stage filtration system. Fine debris are filtered by the circulation
pump drawing water through the ProClear ™ skimmer and pleated filter
button 6 times. The main display reads "FIL"
button once to display the currently programmed
or COOLER
button once to save changes and return to the
button to change duration
Page 41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J-465J-470J-480

Table of Contents