Enabling And Disabling Parksense; Service The Parksense® Rear Park Assist System - Jeep 2014 Grand Cherokee Owner's Manual

Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled with the
ParkSense® switch.
When the ParkSense® switch is pressed to
disable the system, the instrument cluster will
display the "PARKSENSE OFF" message for
approximately five seconds. Refer to "Elec-
tronic Vehicle Information Center (EVIC)" in "Under-
standing Your Instrument Panel" for further information.
When the shift lever is moved to REVERSE and the
system is disabled, the EVIC will display the
"PARKSENSE OFF" message for as long as the vehicle is
in REVERSE.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229
The ParkSense® switch LED will be ON when ParkSense®
is disabled or requires service. The ParkSense® switch LED
will be OFF when the system is enabled. If the ParkSense®
switch is pressed, and the system requires service, the
ParkSense® switch LED will blink momentarily, and then
the LED will be ON.
Service The ParkSense® Rear Park Assist System
During vehicle start up, when the ParkSense® Rear Park
Assist System has detected a faulted condition, the
instrument cluster will actuate a single chime, once per
ignition cycle, and it will display the "PARKSENSE
UNAVAILABLE WIPE REAR SENSORS" or the
"PARKSENSE UNAVAILABLE SERVICE REQUIRED"
message. Refer to "Electronic Vehicle Information Center
(EVIC)" in "Understanding Your Instrument Panel" for
further information. When the shift lever is moved to
3