Jeep 2014 Grand Cherokee Owner's Manual page 349

348 UNDERSTANDING YOUR INSTRUMENT PANEL
Volume soft-key, until a check-mark appears next to set-
ting, indicating that the setting had been selected. Touch
the back arrow soft-key to return to the previous menu.
ParkSense® will retain its last known configuration state
through ignition cycles.
• ParkSense® Park Assist Braking
When this feature is selected, the park assist system will
detect objects located behind the vehicle and utilize
autonomous braking to stop the vehicle. To make your
selection, touch the ParkSense® Park Assist Braking
soft-key, until a check-mark appears next to setting,
indicating that the setting had been selected. Touch the
back arrow soft-key to return to the previous menu. Refer
to "ParkSense® Rear Park Assist" in "Understanding The
Features Of Your Vehicle" for system function and oper-
ating information.
• Tilt Mirrors In Reverse
When this feature is selected, the exterior sideview
mirrors will tilt downward when the ignition is in the
RUN position and the transmission shift lever is in the
REVERSE position. The mirrors will move back to their
previous position when the transmission is shifted out of
REVERSE. To make your selection, touch the Tilt Mirrors
In Reverse soft-key, until a check-mark appears next to
setting, indicating that the setting had been selected.
Touch the back arrow soft-key to return to the previous
menu.
• Paddle Shifting
Selecting this feature enables the use of steering wheel
paddle switches for shifting in manual mode. To make
your selection, touch the Paddle Shifting soft-key, until a
check-mark appears next to setting, indicating that the
setting had been selected. Touch the back arrow soft-key
to return to the previous menu.