Shift Positions - Jeep 2014 Grand Cherokee Owner's Manual

406 STARTING AND OPERATING
WARNING! (Continued)
the parking brake. The transfer case NEUTRAL (N)
position disengages both the front and rear drive
shafts from the powertrain and will allow the vehicle
to move regardless of the transmission position. The
parking brake should always be applied when the
driver is not in the vehicle.

Shift Positions

For additional information on the appropriate use of each
4WD system mode position, see the information below:
4WD AUTO
This range is used on surfaces such as ice, snow, gravel,
sand, and dry hard pavement.
NOTE: Refer to "Selec-Terrain® – If Equipped" in "Start-
ing and Operating" for further information on the vari-
ous positions and their intended usages.
NEUTRAL
This range disengages the driveline from the powertrain.
It is to be used for flat towing behind another vehicle.
Refer to "Recreational Towing" in "Starting and Operat-
ing" for further information.
4WD LOW
This range is for low speed four-wheel drive. It forces the
front and rear wheels to rotate at the same speed. It
provides additional traction and maximum pulling
power for loose, slippery road surfaces only. Do not
exceed 25 mph (40 km/h).
NOTE: Refer to "Selec-Terrain® – If Equipped" for fur-
ther information on the various positions and their
intended usages.