Jeep 2014 Grand Cherokee Owner's Manual page 105

104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
not necessary to use a locking clip. The ALR retractor can
be "switched" into a locked mode by pulling all of the
webbing out of the retractor and then letting the webbing
retract back into the retractor. If it is locked, the ALR will
make a clicking noise while the webbing is pulled back
into the retractor. For additional information on ALR,
refer to the "Automatic Locking Mode" description un-
der "Occupant Restraints." The cinching latch plate is
designed to hold the lap portion of the seatbelt tight
when webbing is pulled tight and straight through a
child restraint's belt path. Please see the table below and
the following sections for more information about both
types of seat belts.
Lap/Shoulder Belt Systems for Installing Child
Restraints in this Vehicle
ALR / Anchor Locations