Front Ventilated Seats With Uconnect® 8.4A/8.4An - If Equipped - Jeep 2014 Grand Cherokee Owner's Manual

154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
You can choose from HIGH, LOW or OFF heat settings.
Amber indicator lights in each switch indicate the level of
heat in use. Two indicator lights will illuminate for
HIGH, one for LOW and none for OFF.
Press the switch once to select HIGH-level
heating. Press the switch a second time to select
LOW-level heating. Press the switch a third
time to shut the heating elements OFF.
NOTE: Once a heat setting is selected, heat will be felt
within two to five minutes.
When the HIGH-level setting is selected, the heater will
provide a boosted heat level during the first four minutes
of operation. Then, the heat output will drop to the normal
HIGH-level. If the HIGH-level setting is selected, the
system will automatically switch to LOW-level after ap-
proximately 60 minutes of continuous operation. At that
time, the number of illuminated LEDs changes from two to
one, indicating the change. The LOW-level setting will turn
OFF automatically after approximately 45 minutes.
Front Ventilated Seats With
Uconnect® 8.4A/8.4AN — If Equipped
On some models, both the driver and passenger seats are
ventilated. Located in the seat cushion and seatback are
small fans that draw the air from the passenger compart-
ment and pull air through fine perforations in the seat
cover to help keep the driver and front passenger cooler
in higher ambient temperatures.
To operate the system, press the "Controls" soft-key
located on the bottom of the Uconnect® display.
Press the "Driver" or "Passenger" vented seat soft-key
once to select HI-level ventilation. Press the vented
soft-key a second time to select LO-level ventilation.
Press the vented soft-key a third time to shut off the seat
ventilation.