Four-Wheel Drive Operation; Quadra-Trac I® Operating Instructions/Precautions - If Equipped - Jeep 2014 Grand Cherokee Owner's Manual

404 STARTING AND OPERATING
To disengage Paddle Shift mode, press and hold the (+)
shift paddle until D or S is once again displayed in the
instrument cluster. You can shift in or out of Paddle Shift
mode at any time without taking your foot off the
accelerator pedal.
WARNING!
Do not downshift for additional engine braking on a
slippery surface. The drive wheels could lose their
grip and the vehicle could skid, causing a collision or
personal injury.

FOUR-WHEEL DRIVE OPERATION

Quadra-Trac I® Operating Instructions/
Precautions – If Equipped
The Quadra-Trac I® is a single-speed (HI range only)
transfer case, which provides convenient full-time four-
wheel drive. No driver interaction is required. The Brake
Traction Control (BTC) System, which combines standard
ABS and Traction Control, provides resistance to any
wheel that is slipping to allow additional torque transfer
to wheels with traction.
NOTE: The Quadra-Trac I® system is not appropriate
for conditions where 4WD LOW range is recommended.
Refer to "Off-Road Driving Tips" in "Starting and Oper-
ating" for further information.