Removing Living Connect; Resetting Living Connect® To Default Settings - Danfoss living connect Installation And User Manual

Installation Guide
1.9 Removing living connect®
1.
Activate Installation Mode: Press
seconds to select the Function Menu.
Select M with . When M flashes, press
3.
Remove the battery cover and the batteries.
1.10 Resetting living connect® to default settings
1.
Remove the battery cover and take out one
battery.
Danfoss Heating Solutions
living connect®
2.
for 3
A large M is flashing in the display to indicate
that Installation Mode is activated.
.
4.
Insert the Allen key or similar into the hole to
lock the adapter ring. Turn counterclockwise
to unscrew living connect® from the adapter.
2.
Press and hold
reinserting the battery.
VIIDH102
for approx. 5 seconds, while
9
11/2013