Technical Specifications - Danfoss living connect Installation And User Manual

Installation Guide

2. Technical specifications

Thermostat type
Recommended use
Actuator
Display
Software classification
Control
Transmission frequency / range 868.42 MHz / up to 30 m
Power supply
Power consumption
Battery life
Low batteri signal
Ambient temperature range
Transportation temperature
range
Maximum water temperature
Temperature setting range
Measurement interval
Clock accuracy
Spindle movement
Noise level
Safety classification
Open-window function
Weight (incl. batteries)
IP class
Approvals, markings etc.
Tested for safety and EMC requirements as specified in EN 60730-1, EN 60730-2-9 and EN 60730-2-14.
Danfoss Heating Solutions
living connect®
Programmable electronic radiator valve controller
Residential (pollution degree 2)
Electromechanical
Grey digital with backlight
A
PID
2 x 1.5 V alkaline AA batteries
3 μW in standby, 1.2 W when active
2 years
Battery icon will flash in display.
If battery level is critical, the whole display will flash.
0 to 40 °C
-20 to 65 °C
90 °C
4 to 28 °C
Measures temperature every minute
+/- 10 min/year
Linear, up to 4.5 mm, max. 2 mm on valve (1 mm/s)
<30 dBA
Type 1
Activated at temperature decrease of approx. 0.5 °C over 3 min.
177 g (with RA adapter)
20 (not to be used in hazardous installations or in places
where it will be exposed to water)
VIIDH102
Intertek
11
11/2013