Overview Of Display And Control Buttons; Connecting Living Connect® To A Danfoss Link™ System; Configuring Rooms In Danfoss Link™ Cc; Connecting Living Connect® To Danfoss Link™ Cc - Danfoss living connect Installation And User Manual

User Guide

3. Overview of display and control buttons

Low battery symbol
Network connection
Lock
Use these buttons to navigate within the menu and to adjust the temperature.
Use this button to select the menu and confirm choices.
* living connect is displaying the set temperature, not the measured room temperature.
4. Connecting living connect® to a Danfoss Link™ system
4.1 Configuring rooms in Danfoss Link™ CC
Make sure that the room in which living connect® has been installed, has been configured in
Danfoss Link™ CC - see installation guide for Danfoss Link™ CC.
4.2 Connecting living connect® to Danfoss Link
1.
max.
150 cm
Move the Danfoss Link™ CC within a distance
of 1.5 m from the thermostat (the battery pack
014G0262 is recommended).
12 11/2013
living connect®
^
CC
TM
2.
The "Configure room" menu is displayed.
Select "Room devices".
VIIDH102
Temperature set point*
Frost protection
Con gure Room
Bedroom, North
Adjust the room's settings here.
Devices in room: 0
Regulation type: Unregulated.
Room name
Room devices
Heating regulation
?
Danfoss Heating Solutions
Alarm