Installation Guide
1.10 Removing Danfoss Eco™
1.
Press and hold
indicates you are in mounting mode
3.
Press firmly on the tab and unscrew the
thermostat from the adapter.
1.11 Resetting Danfoss Eco™ to default settings
1.
Remove the cover and take out one battery.
VILTH102
Danfoss Eco™ Electronic radiator thermostat
until large M flashes. This
2.
Remove the cover.
2.
Press and hold
, Keep holding while
reinserting the battery. The screen will go
blank after approx 3 seconds.
© Danfoss | Heating Segment | 2017.04 |
11