Installing The Right Adapter - Danfoss living connect Installation And User Manual

Installation Guide

1.4 Installing the right adapter

Adapter for RA valves (pre-mounted on 014G0001)
1.
Place the RA adapter on the valve as shown.
Adapter for M30 x 1.5 (K) valves
1.
Place the K adapter on the valve as shown.
Adapter for RAV valves (accessory)
1.
Click the inner adapter on the valve.
Adapter for RAVL valves (accessory)
1.
Click the inner adapter on the valve.
6
11/2013
living connect®
2.
Tighten the adapter with the 2 mm Allen key.
2.
Hand-tighten the K adapter (max. 5 Nm).
2.
Hand-tighten the outer adapter (max. 5 Nm).
2.
Hand-tighten the outer adapter (max. 5 Nm).
VIIDH102 Danfoss Heating Solutions