Log Setting - ZyXEL Communications NWA5301-NJ User Manual

Table 65 Configuration > Log & Report > Email Daily Report (continued)
LABEL
Mail Subject
Mail From
Mail To
SMTP
Authentication
User Name
Password
Send Report
Now
Time for
sending report
Report Items
Reset All
Counters
Apply
Reset

13.3 Log Setting

These screens control log messages and alerts. A log message stores the information for viewing
(for example, in the Monitor > View Log screen) or regular e-mailing later, and an alert is e-
mailed immediately. Usually, alerts are used for events that require more serious attention, such as
system errors and attacks.
The NWA provides a system log and supports e-mail profiles and remote syslog servers. The system
log is available on the View Log screen, the e-mail profiles are used to mail log messages to the
specified destinations, and the other four logs are stored on specified syslog servers.
The Log Setting tab also controls what information is saved in each log. For the system log, you
can also specify which log messages are e-mailed, where they are e-mailed, and how often they are
e-mailed.
For alerts, the Log Setting screen controls which events generate alerts and where alerts are e-
mailed.
The Log Setting screen provides a summary of all the settings. You can use the Edit Log Setting
screen to maintain the detailed settings (such as log categories, e-mail addresses, server names,
etc.) for any log. Alternatively, if you want to edit what events is included in each log, you can also
use the Active Log Summary screen to edit this information for all logs at the same time.
NWA5301-NJ User's Guide
DESCRIPTION
Type the subject line for the outgoing e-mail. Select Append system name to add the
NWA's system name to the subject. Select Append date time to add the NWA's system
date and time to the subject.
Type the e-mail address from which the outgoing e-mail is delivered. This address is used in
replies.
Type the e-mail address (or addresses) to which the outgoing e-mail is delivered.
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
This box is effective when you select the SMTP Authentication check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
This box is effective when you select the SMTP Authentication check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Click this button to have the NWA send the daily e-mail report immediately.
Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation.
Select the information to include in the report. Select Reset counters after sending
report successfully if you only want to see statistics for a 24 hour period.
Click this to discard all report data and start all of the counters over at zero.
Click Apply to save your changes back to the NWA.
Click Reset to return the screen to its last-saved settings.
Chapter 13 Log and Report
141