Nwa Access And Login - ZyXEL Communications NWA5301-NJ User Manual

If the problem continues, contact the vendor.
5

18.3 NWA Access and Login

I forgot the IP address for the NWA.
The default IP address (in standalone AP mode) is 192.168.1.2.
1
If you changed the IP address and have forgotten it, you have to reset the device to its factory
2
defaults. See
If your NWA is a DHCP client, you can find your IP address from the DHCP server. This information
3
is only available from the DHCP server which allocates IP addresses on your network. Find this
information directly from the DHCP server or contact your system administrator for more
information.
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address (in standalone AP mode) is 192.168.1.2.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the NWA.
Check the hardware connections, and make sure the LED is behaving as expected. See the Quick
2
Start Guide and
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled.
Make sure your computer is in the same subnet as the NWA. (If you know that there are routers
4
between your computer and the NWA, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a dynamic IP
address.
• If there is no DHCP server on your network, make sure your computer's IP address is in the
same subnet as the NWA.
Reset the device to its factory defaults, and try to access the NWA with the default IP address. See
5
Section 18.6 on page
If the problem continues, contact the network administrator or vendor, or try one of the advanced
6
suggestions.
Advanced Suggestions
NWA5301-NJ User's Guide
Section 18.6 on page 172.
Section 1.5 on page 20.
172.
Chapter 18 Troubleshooting
I
167