ZyXEL Communications NWA5301-NJ User Manual page 58

Chapter 6 Network
Use this screen to configure the VLAN settings for your NWA and enable or disable a port. To access
this screen, click Configuration > Network > VLAN.
Figure 29 Configuration > Network > VLAN
Each field is described in the following table.
Table 25 Configuration > Network > VLAN
LABEL
VLAN Settings
Management
VLAN ID
As Native VLAN
Port Setting
#
Status
Port
PVID
VLAN Member
Configuration
#
Status
58
DESCRIPTION
Enter a VLAN ID for the NWA.
Select this option to treat this VLAN ID as a VLAN created on the NWA and not one
assigned to it from outside the network.
This is the port's index number in this list.
This displays whether or not the port is activated.
This shows the name of the physical Ethernet port on the NWA.
This shows the port's PVID.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a
port so that the frames are forwarded to the VLAN group that the tag defines.
This is the VLAN's index number in this list.
This displays whether or not the VLAN is activated.
NWA5301-NJ User's Guide