ZyXEL Communications NWA5301-NJ User Manual page 116

Chapter 12 System
The following table describes the labels in this screen.
Table 56 Configuration > System > Date/Time
LABEL
Current Time and
Date
Current Time
Current Date
Time and Date
Setup
Manual
New Time
(hh:mm:ss)
New Date
(yyyy-mm-dd)
Get from Time
Server
Time Server
Address
Sync. Now
Time Zone Setup
Time Zone
Enable Daylight
Saving
Start Date
116
DESCRIPTION
This field displays the present time of your NWA.
This field displays the present date of your NWA.
Select this radio button to enter the time and date manually. If you configure a new time
and date, time zone and daylight saving at the same time, the time zone and daylight
saving will affect the new time and date you entered. When you enter the time settings
manually, the NWA uses the new setting once you click Apply.
This field displays the last updated time from the time server or the last time configured
manually.
When you set Time and Date Setup to Manual, enter the new time in this field and
then click Apply.
This field displays the last updated date from the time server or the last date configured
manually.
When you set Time and Date Setup to Manual, enter the new date in this field and
then click Apply.
Select this radio button to have the NWA get the time and date from the time server you
specify below. The NWA requests time and date settings from the time server under the
following circumstances.
• When the NWA starts up.
• When you click Apply or Sync. Now in this screen.
• 24-hour intervals after starting up.
Enter the IP address or URL of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Click this button to have the NWA get the time and date from a time server (see the
Time Server Address field). This also saves your changes (except the daylight saving
settings).
Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight saving is a period from late spring to fall when many countries set their clocks
ahead of normal local time by one hour to give more daytime light in the evening.
Select this option if you use Daylight Saving Time.
Configure the day and time when Daylight Saving Time starts if you selected Enable
Daylight Saving. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of
March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select Second, Sunday, March and type
2 in the at field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of
the time zones in the European Union start using Daylight Saving Time at the same
moment (1 A.M. GMT or UTC). So in the European Union you would select Last,
Sunday, March. The time you type in the at field depends on your time zone. In
Germany for instance, you would type 2 because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
NWA5301-NJ User's Guide