ZyXEL Communications NWA5301-NJ User Manual page 60

Chapter 6 Network
To access this screen, click Add or select a VLAN and click the Edit button in the Configuration >
Network > VLAN screen.
Figure 31 Configuration > Network > VLAN > Edit VLAN
Each field is described in the following table.
Table 27 Configuration > Network > VLAN > Edit VLAN
LABEL
Enable
Name
VID
Member
Configuration
Edit
#
Port Name
Member
Tx Tagging
OK
Cancel
60
DESCRIPTION
Select this option to activate the VLAN. Otherwise, deselect it.
This field is read-only if you are editing an existing VLAN.
Enter the number of the VLAN. You can use a number from 0~4095. For example,
vlan0, vlan8, and so on.
Enter the VLAN ID. This 12-bit number uniquely identifies each VLAN. Allowed values
are 1 - 4094. (0 and 4095 are reserved.)
Use these settings to assign ports to this VLAN as members.
Click this to edit the selected port's membership values.
This is sequential indicator of the port number.
This indicates the port name.
This indicates whether the selected port is a member or not of the VLAN which is
currently being edited.
Click this field to edit the value.
This indicates whether the selected port tags outbound traffic with this VLAN's ID .
Click this field to edit the value.
Click OK to save your changes back to the NWA.
Click Cancel to close the window with changes unsaved.
NWA5301-NJ User's Guide