Table 5-2 Tcp/Ip Remote Node Configuration - ZyXEL Communications Prestige 643 User Manual

FIELD
VPI
VCI
Rem IP Adress
Rem IP Subnet
Mask
IP Address
Assignment
My Wan Address
Single User
Account
Metric
Private
Remote Node TCP/IP Configuration

Table 5-2 TCP/IP Remote Node Configuration

Enter the Virtual Path Identifier (VPI) supplied by your telephone
company.
Enter the Virtual Channel Identifier (VCI) supplied by your
telephone company.
This will show the IP address you entered for this remote node
in the previous menu.
Enter the subnet mask for the remote network.
Choose Dynamic if you have a dynamically assigned IP
address or Static if you have a static IP address.
Some implementations, especially the UNIX derivatives, require
the WAN link to have a separate IP network number from the
LAN and each end must have a unique address within the WAN
network number. If this is the case, enter the IP address
assigned to the WAN port of your Prestige.
NOTE: This is the address assigned to your local Prestige WAN,
not the remote router. If the remote router is a Prestige, then
this entry determines the local Prestige Rem IP Addr in Menu
11.1.
Choose Yes to enable or No to disable the Single User Account
feature. See the section on Internet Access Applications for
more information on the Single User Account feature.
Metric represents the "cost" of transmission for routing purposes.
IP routing uses hop count as the measurement of cost, with a
minimum of 1 for directly connected networks. Enter a number
that approximates the cost for this link. The number need not be
precise, but it must be between 1 and 15. In practice, 2 or 3 is
usually a good number.
This parameter determines if the Prestige will include the route
to this remote node in its RIP broadcasts. Choose Yes to keep
this route private and not include in RIP broadcast. Choose No
to propagate this remote node to other hosts through RIP
broadcasts.
DESCRIPTION
Prestige 643 ADSL Router
EXAMPLE
Dynamic
No
2
No
5-5