Figure 5-3 Menu 11.3 For Llc-Based Multiplexing - ZyXEL Communications Prestige 643 User Manual

Menu 11.3 - Remote Node Network Layer Options
VPI/VCI (LLC-mux or PPP/PPPoE Encap):
VPI #= 0
VCI #= 35
IP Options :
Rem IP Addr:
Rem Subnet Mask= 0.0.0.0
IP Adress Assignment = Dynamic
My WAN Addr= 0.0.0.0
Single User Account= Yes
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=
Enter here to CONFIRM or ESC to CANCEL:
In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for
the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM
traffic).
The following diagram explains the sample IP addresses to help you understand the field of My Wan Addr
in Menu 11.3. Refer to the following figure for a brief review of what a WAN IP is. My WAN Addr field
indicates the local Prestige WAN IP while Rem IP Addr field indicates the peer WAN IP.
Remote Node TCP/IP Configuration
IPX Options:
Rem LAN Net #= 00000000
My WAN Net #= 00000000
Hop Count= 1
Tick Count= 2
W/D Spoofing(min)= 3
SAP/RIP Timeout(min)= 3
Dial-On-Query= no
Bridge Options:
Dial-On-Broadcast= N/A
Ethernet Addr Timeout(min)= N/A

Figure 5-3 Menu 11.3 for LLC-based Multiplexing

Prestige 643 ADSL Router
Only one set of
VPI and VCI
numbers need
be specified as
for LLC-based
multiplexing or
when using PPP
or PPPoE
encapsulation.
One VC may
carry different
protocols.
5-3