Prestige 643 In An Ipx Environment; Prestige 643 On Lan With Server; Ipx Ethernet Setup; Prestige 643 On Lan Without Server - ZyXEL Communications Prestige 643 User Manual

6.2

Prestige 643 in an IPX Environment

There are two scenarios in which your Prestige is deployed, depending on whether there is a NetWare
server on the LAN, as depicted in the following diagram.

6.2.1 Prestige 643 on LAN With Server

If your Prestige is on a LAN with a seed router, you do not need to configure the LAN network numbers.
Your Prestige will learn the network number from the seed router and add the routes to its routing table.

6.2.2 Prestige 643 on LAN Without Server

Each IPX network must have a seed router. If you only have NetWare clients on your network, then you
must configure the Prestige as a seed router and set up unique network numbers for each frame type enabled
using Ethernet Setup menu.
6.3

IPX Ethernet Setup

In Menu 3 – Ethernet Setup, press 3 to display Menu 3.3 - Novell IPX Ethernet Setup as shown next.
IPX Configuration

Figure 6-2 Prestige in an IPX Environment

Prestige 643 ADSL Router
6-3