Restore Configuration; Figure 10-10 Hyperterminal Screen; Figure 10-11 Successful Backup; Figure 10-12 Restore Configuration - ZyXEL Communications Prestige 642 User Manual

Step 3. Click "Transfer", then "Receive File" to display the following screen.
Step 4. Enter where you want to place the rom configuration file on your computer, give it a suitable
name, e.g., p642.rom (see section 2.9 Filename conventions) and make sure you choose the X-
Modem Protocol. Then press "Receive".
Step 5. After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
** Backup Configuration completed. OK.
### Hit any key to continue.###
Please note that terms "download" and "upload" are relative to the workstation. Download means to
transfer from another machine to the workstation, while upload means from your workstation to another
machine.

10.5 Restore Configuration

Selecting option 6 from Menu 24 - System Maintenance to restore the configuration from your
workstation to the Prestige. Again, you must use the console port and XMODEM protocol to restore the
configuration.
Step 1. Go to Menu 24.6 (shown next).
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
System Maintenance
Prestige 642 ADSL Internet Access Router

Figure 10-10 HyperTerminal Screen

Figure 10-11 Successful Backup

Figure 10-12 Restore Configuration

Enter where you want to place
the rom configuration file on
your computer.
Choose the
X-Modem
Protocol.
10-11