Resetting The Prestige; General Setup; Table 2-4 Filename Conventions - ZyXEL Communications Prestige 642 User Manual

File Type Internal
Name
Configuration
Rom-0
File
Firmware Ras

2.9.1 Resetting the Prestige

If you have forgotten your password or for some reason cannot access the SMT menu you will need to
reinstall the configuration file. Uploading the configuration file replaces the current configuration file with
the default configuration file, you will lose all configurations that you had before and the speed of the
console port will be reset to the default of 9600bps with 8 data bit, no parity and 1 stop bit (8n1). The
password will be reset to the default of 1234, also.
Turn off the Prestige and begin a Telnet session with the default console port settings. Turn on the Prestige
again. When you see the message "Press Any key to enter Debug Mode within 3 seconds", press any key to
enter debug mode. You should already have downloaded the correct file from your nearest ZyXEL FTP
site. See section 10.5 Restore Configuration on page 10-11 for more information on how to transfer the
configuration file to your Prestige.

2.10 General Setup

Menu 1 - General Setup contains administrative and system-related information.
To enter Menu 1 and fill in the required information, follow these steps:
Step 1. Enter 1 in the Main Menu to open Menu 1 – General Setup.
Step 2.
The Menu 1 - General Setup screen appears, as shown below. Fill in the required fields marked
[?] and turn on the individual protocols for your applications, as explained in the following table.
Hardware Installation & Setup
Prestige 642 ADSL Internet Access Router

Table 2-4 Filename Conventions

External
Name
*.rom This is the router configuration filename
on the Prestige. Uploading the rom-0 file
replaces the entire ROM file system,
including your Prestige configurations,
system-related data (including the baud
rate and default password), the error log
and the trace log.
*.bin This is the generic name for the ZyNOS
firmware on the Prestige.
Description AT
Command
ATLC
ATUR
2-9