Ipx Ethernet Setup; Figure 6-3 Menu 3.3 - Novell Ipx Ethernet Setup; Table 6-1 Novell Ipx Ethernet Setup Fields - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router
6.3

IPX Ethernet Setup

From Menu 3 - Ethernet Setup, enter 3 to go to Menu 3.3 - Novell IPX Ethernet Setup as shown in the
figure below.
Press Space Bar to Toggle.

Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup

The following table describes the Novell IPX Ethernet Setup Menu.
Field
Seed Router
Frame Type
IPX Network
#
Press [Enter] at the message [Press ENTER to Confirm ...] to save your configuration,
or press [Esc] at any time to cancel.
6-4
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Enter here to CONFIRM or ESC to CANCEL:

Table 6-1 Novell IPX Ethernet Setup Fields

Description
Determine if your Prestige 642 is to act as a seed
router.
Enable/Disable the individual frame type.
Remember to enable only the ones that are actually
used on your network.
If your Prestige 642 is a seed router, enter a unique
network number for each frame type enabled.
Options
Yes/No
802.2
802.3
Ethernet II
SNAP
IPX Configuration