Fuji Xerox DocuPrint CP215 Series User Manual page 58

• WPS-PBC (WPS Button)
You can start WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) by pressing the
(WPS) button.
NOTE:
• WPS-PBC is available only when the wireless LAN access point (Registrar) or router supports WPS-PBC.
• Before starting WPS-PBC with the
may vary) on the wireless LAN access point (Registrar) or router. For information about WPS operation on the
wireless LAN access point (Registrar) or router, refer to the manual supplied with the product.
• The (Wi-Fi) LED lights up or blinks to indicate the printer's wireless connection status. For more
information, see "Status of Wi-Fi LED (DocuPrint CP215 w Only)" on page
If a problem occurs or error messages are displayed on the LCD panel, see
CP215 w Only)" on page
1
Press and hold the
Confirm that the
appears on the LCD panel.
2
Start the WPS operation on the wireless LAN access point (Registrar) or router within two
minutes.
When the WPS operation is successful and the printer is automatically rebooted, wireless LAN
connection setting is completed.
58 Printer Connection and Software Installation
(WPS) button, confirm the position of the WPS button (button name
203.
(WPS) button on the printer for two seconds.
(Wi-Fi) LED starts to blink slowly and Press WPS Button on Router
OK
35.
"Wireless Problems (DocuPrint