Using Installer to Set Up Connection and Install Software
Launching the Printer Setup Screen
NOTE:
•
The following procedure sets up printer connection and then install the print driver and software. If you have
already established printer connection, go to
driver and software immediately.
1
Insert the Software Pack CD-ROM into your computer to start the Printer Setup screen.
NOTE:
•
For Windows 8 and Windows Server
the screen, and then select Run setup.exe.
•
If the CD does not automatically launch, perform the following steps.
a
For Windows XP, Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2, click
Start (start for Windows XP)
For Windows Vista
For Windows 8 and Windows Server 2012, right-click on the Start screen and click All apps
b
Enter "D:\setup.exe" (in case your optical disk drive is D), and then click OK.
2
Click the Setup Printer and Install Software button.
3
If you agree to the terms of the License Agreement, choose I accept the terms of the license
agreement, and then click Next.
"Using Installer to Install Software" on page 74
®
2012, click on the message displayed on the upper right corner of
→
Run.
®
and Windows 7, click Start
→
All Programs
Printer Connection and Software Installation
to install the print
→
→
Accessories
Run.
→
Run.
71