Fuji Xerox DocuPrint CP215 Series User Manual page 57

You can select a method to configure a wireless setting from the following:
Using the installer on the Software Pack CD-ROM (Windows Only) (Recommended for initial setup)
Refer to "Launching the Printer Setup Screen" on page
WPS-PBC ( (WPS) button)
Refer to "WPS-PBC (WPS Button)" on page
WPS-PBC (Operator Panel Menu)
Refer to "WPS-PBC (Operator Panel Menu)" on page
*2
WPS-PIN
Refer to "WPS-PIN" on page
Auto SSID Setup
Refer to "Auto SSID Setup" on page
Manual SSID Setup
Refer to "Manual SSID Setup" on page
*1
: WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register
devices required for wireless configuration, by starting WPS-PBC on the printer with the
button or operator panel menu, and then pressing the button provided on the wireless LAN access point
(Registrar) or router. This setting is available only when the access point supports WPS-PBC.
*2
: WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and
register devices required for wireless configuration, by entering PIN assignments in the printer and
computer. This setting, performed through access point, is available only when the access point of your
wireless router supports WPS.
*1
58.
*1
59.
60.
61.
Printer Connection and Software Installation
71.
59.
(WPS)
57